LDO Posted August 7, 2011 Share Posted August 7, 2011 That stuff machines LIKE BUTTA! It DOES make a lot of dust, however. I saw a big wet/dry vac on clearance at Lowes today. I'm going to go get it tomorrow morning. It makes so much dust that I think I'll whittle away as much as I can before turning it on the lathe. You gotta get some of this stuff. Quote Link to comment Share on other sites More sharing options...
randx0 Posted August 7, 2011 Share Posted August 7, 2011 how about some photos of whatever you are using it for. what density did you get?and finally before someone else asks What is renshape? Quote Link to comment Share on other sites More sharing options...
Junkman Posted August 7, 2011 Share Posted August 7, 2011 how about some photos of whatever you are using it for. what density did you get?and finally before someone else asks What is renshape? I had to google it too. Seems to be some type of foam material which is used in protoype modelling. On my search, I came across this thread on another forum: http://s362974870.onlinehome.us/forums/air/index.php?showtopic=195854 People like this always make me feel like a total perman00b. Quote Link to comment Share on other sites More sharing options...
LDO Posted August 7, 2011 Author Share Posted August 7, 2011 how about some photos of whatever you are using it for. what density did you get?and finally before someone else asks What is renshape? I don't have any photos yet. I don't know what density it is; I found a guy who had some scraps available so I got them. The color is a brownish pink, almost like granite. I did a Google search and from the color, I'd guess I have Renshape 440. I'd say it has about the same density as Basswood, but of course no grain. Renshape is a machinable high density foam. Later today, I'll find out if it can be drilled and tapped, for now, I have to go to a company BBQ. Later Quote Link to comment Share on other sites More sharing options...
Harry P. Posted August 7, 2011 Share Posted August 7, 2011 Found the spec sheet online: REN SHAPE® 440 LOW-DENSITY STYLING BOARD Ren Shape 440 is a light reddish-brown, syntactic polyurethane board. Ren Shape 440 has a moderately low density of approximately 31 to 34 pounds per cubic foot. Ren Shape 440 machines very easily and finishes to a good surface. The product is useful as a material for hand working and CNC machining styling and temporary master models. Advantages include: • Easy to hand-work and machine • Very fast cutting speeds • Non-abrasive • Excellent edge definition • Excellent hardness (Shore 58D) • Good dimensional stability Applications include temporary and architectural master models, styling models and prototypes, visual models, NC tape proofing, and other applications requiring fast machining and good model surfaces. Ren Shape comes in several different densities; some are so dense that carbide cutters are needed. 440 is one of the more "modeler-friendly" versions, it's low density and cuts easily. Quote Link to comment Share on other sites More sharing options...
MikeMc Posted August 7, 2011 Share Posted August 7, 2011 It does turn well...We used it for making dollhouse columns had paint issues until it was sealed. follow directions and you will be happy. Quote Link to comment Share on other sites More sharing options...
comp1839 Posted August 7, 2011 Share Posted August 7, 2011 i've used renshape a lot. it is wonderful stuff to work with. it is machinable and hand workable. i've built the masters for my 417 donovan completely out of renshape. the screwblower and the entire top end of the BAE motor in my TAD. the lenco and the BRT unit in the camaro. my strange top loader rear. i have a 1/8 scale '41 willys promod body master that needs to be finished but, still all of it is made from 440 renshape. also done a ton of other stuff with it. it will hold a .015 wide fin if you are gentle machining it. i've done fins in mickey thompson valve covers, donovan valve covers, electronic boxes (although to hold perfect fins in the electronic stuff i used a higher density since the fins can get really fine.) you do need to prep it a little to paint it. other than that the stuff is wonderful. just my 2 cents worth. Quote Link to comment Share on other sites More sharing options...
Art Anderson Posted August 7, 2011 Share Posted August 7, 2011 I've used RenShape 440 since 1995, when Chris Etzel (then of Etzel's Speed Classics) introduced me to it. 440 carves beautifully, sands, files, drills just as nicely. it does have a certain "graininess", but any good lacquer primer will seal and fill the surface; once sanded it is smooth as any styrene. I've run a bit of the stuff through my Sherline mill, and it works very well there. Milling chips do come off, just as one would expect, but it's not particularly dusty, and a quick vacuuming with my hand vac--end of problem. Both epoxies and CA glues work very well with the stuff as well. Art Quote Link to comment Share on other sites More sharing options...
Nova-ss Posted August 8, 2011 Share Posted August 8, 2011 Sounds interesting to me....next question,where do you get it from? Thank you,Chris Quote Link to comment Share on other sites More sharing options...
1320wayne Posted August 8, 2011 Share Posted August 8, 2011 I've been using it for about just more than a year now but I've only utilized it for making bucks for resin casting molds. Never have I tried to use it for some of the applications listed here and that link above is truely amazing with the Ford Tri Motor being scratchbuilt. Quote Link to comment Share on other sites More sharing options...
comp1839 Posted August 8, 2011 Share Posted August 8, 2011 wayne, here is the donovan i did in renshape. the block and crank girdle. completed long block Quote Link to comment Share on other sites More sharing options...
shucky Posted August 9, 2011 Share Posted August 9, 2011 Does this stuff rust tools like balsa foam? Also there does not seem to be a place to get it in small modeler friendly sizes, at least from the research I've done. And the bigger stuff is not cheap. Quote Link to comment Share on other sites More sharing options...
LDO Posted August 9, 2011 Author Share Posted August 9, 2011 Does this stuff rust tools like balsa foam? Also there does not seem to be a place to get it in small modeler friendly sizes, at least from the research I've done. And the bigger stuff is not cheap. No idea on the rust issue. I haven't found it in modeler-friendly quantities from any dealer. I stumbled across someone selling scraps. Maybe we could get several guys together to buy a giant chunk, then have it cut into smaller pieces. Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted August 9, 2011 Share Posted August 9, 2011 Balsa foam rusts blades? Huh. That solves one of my workbench mysteries. Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted August 9, 2011 Share Posted August 9, 2011 Thanks for the specs, Harry. Quote Link to comment Share on other sites More sharing options...
comp1839 Posted August 9, 2011 Share Posted August 9, 2011 mike, just so you know. the entire engine is made from renshape not just the block. valve covers to oil pan. renshape is great stuff, if you can get a hold of it. Quote Link to comment Share on other sites More sharing options...
Harry P. Posted August 9, 2011 Share Posted August 9, 2011 renshape is great stuff, if you can get a hold of it. So... where do you get a hold of it??? Quote Link to comment Share on other sites More sharing options...
my66s55 Posted August 9, 2011 Share Posted August 9, 2011 Here: http://www.freemansupply.com/RenShape440Styling.htm Quote Link to comment Share on other sites More sharing options...
Harry P. Posted August 9, 2011 Share Posted August 9, 2011 Here: http://www.freemansu...e440Styling.htm Price??? I assume that since they make you ask for a quote, it's not exactly cheap. Quote Link to comment Share on other sites More sharing options...
my66s55 Posted August 9, 2011 Share Posted August 9, 2011 Rather costly. A 2" x 20" x 60" piece on another site is $322 and change plus shipping. I won't be ordering any. Quote Link to comment Share on other sites More sharing options...
Harry P. Posted August 9, 2011 Share Posted August 9, 2011 Rather costly. A 2" x 20" x 60" piece on another site is $322 and change plus shipping. Holy ****! Quote Link to comment Share on other sites More sharing options...
Harry P. Posted August 9, 2011 Share Posted August 9, 2011 Hey! I thought that wasn't allowed! (completely warranted though!) I was just saying "holy stars"... Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted August 9, 2011 Share Posted August 9, 2011 Sooo...If someone was to buy some,and offer it up to people here(using emodelcars and paypal) what would be the most desirable size to order? just asking.I'd like to try it myself. Quote Link to comment Share on other sites More sharing options...
comp1839 Posted August 9, 2011 Share Posted August 9, 2011 mike, the engine is 1/8 scale. dave, the white stuff is styrene. i put slots in the block and ca glued the styrene webs in. Quote Link to comment Share on other sites More sharing options...
comp1839 Posted August 9, 2011 Share Posted August 9, 2011 dave, the .015" wide fins i was referring to were on the valve cover. the fins on the valve cover were achieved with a .032"cutter on .045" centers. that leaves a .13" fin standing. i just call it .015" 'cause it's easier. the ribs on the block, while i could have spent a bunch of time machining out in between each individual rib. it was just a bunch easier to machine the side of the block without the ribs and then go back and install them as separate operation. i hope that helps. as far as finding renshape......i lucked out and bought mine on ebay. it was new in the wrapper and i paid about half the going price for it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.