Sign in to follow this  
Followers 0

kinda fun little trailer from the Revell Midgets

13 posts in this topic

Posted (edited) · Report post

a bit of a diversion here, cause as we all know, monkey see, monkee doo, and i just couldnt resist trying the trailer from the Revell Midget kits and using it to support my already built reps and mins of maryland resin go kart. it looked like such a perfect match that i just had to do one!

if the way this trailer goes together is any indication of what to expect from the main attraction, the midget, then i am in for a treat when i do one of those. this trailer looks nice, was a bit fiddley but basically fell together. as usual, i did have my own personal challenges, like i tried using some ancient (really...i think the date on it was 1992) matte finish bare metal foil and it would not stick at all. closer examination revealed why: there was basically no adhesive. so the center section is still prone to lift off the surface but the diamond plate image has been embossed into it so thats not a problem, i will slip some elmers in there one of these days and that should hold it down. the side sections that the wheels roll on are done with detail master foil i had around and it worked great though i liked the thickness of the real BMF better. the detail master stuff is very thin and curls when you take it off the backing if youre not careful but at least it stuck!

anyway heres some pics and if you got some extra time and a subject to use on it, these trailers are a refreshing break from getting bogged down in detail and they look great when done.

thanks for looking and any comments questions or criticisms are welcome!

i made a "wood" floor for what is missing from the kit itself which is wide open in this area. i just took a piece of sheet plastic, scored it to resemble cracks between planks, drilled some nail holes, then ran my dremel with a small bit up and down a bit. a bit too much actually and i should have been more disciplined about what i was carving but it is what it is at this point. i layered a few coats of dark woody kinda paint and then sanded down through it and washed it with black. took longer to explain than it did to actually do it!

floorboard.jpg

i also modified what are in the kit wheel bump bars that wrap around the midgets front wheel when its fully on the trailer. didnt want that with the wide body of the kart so i fabbed a short rail extension with plastic strip and it worked great. any imperfections i lay to the welding job.

hubcapandtaillight.jpg

here is a shot looking up the ramps. tailights, license plate and holder are all out of the box:

wormsviewofrear.jpg

loaded up, you can see the trailer almost seems made for the kart or vice versa:

niceoverallfromrearleft.jpg

one more this time all packed up with the ramps up and secured by little rods

kartontrailerfromabove2.jpg

one other thing i forgot to mention: i shot this all with my airbrush, really my first attempt to cover something of some size. turned out very nice if i may say so myself, even though it is just a flat surface and therefore much easier to achieve than a typical auto finish. but i got it on even, flat, and light, just what i was trying to do. and the airbrush let me get right down into corners and stuff!

Edited by jbwelda

Share this post


Link to post
Share on other sites

Posted · Report post

Very nicely done!

Luv the kart too B)

Share this post


Link to post
Share on other sites

Posted · Report post

very coooll

Share this post


Link to post
Share on other sites

Posted · Report post

That turned out nice!

Share this post


Link to post
Share on other sites

Posted · Report post

Really nice job. I just finished a couple of street bikes, I think they would look cool on that trailer also. Great idea. (but now I have to buy another kit. LOL)

Share this post


Link to post
Share on other sites

Posted · Report post

What did you use to make the wood grain. Looks pretty cool by the way. Two thumbs up

Tim

(null)

Share this post


Link to post
Share on other sites

Posted · Report post

where did u get the cart

Share this post


Link to post
Share on other sites

Posted · Report post

thanks for the replies, let me address a couple of the questions:

the wood grain, like i said i just faked it with sheet plastic, a dremel, a couple drinks and a few woody-colored brush painted colors. then i sanded down through the layers of paint a bit to reveal the different shades, followed up by a wash of detailer black and that was pretty much it.

the kart was originally with AMT 63 ford f-100 extremely rare and expensive kit nowadays but Replicas and Miniatures of Maryland to the rescue with a resin repop of it. cost about 30 or 35 $ but well worth it. the shell is beginning to warp just a bit but that is probably because i didnt really pay much attention to the instrux that mentioned one should be careful to paint even coats on the inside and outside or it might warp. as it is if the shell were glued together it still fits nicely but of course then you cannot see the detail of the kart itself. i am looking for a real plastic shell and if i find one i might replace the resin one with it and hopefully make it sit together a bit better.

Share this post


Link to post
Share on other sites

Posted · Report post

Love it, very cool indeed. Nice work.

Share this post


Link to post
Share on other sites

Posted · Report post

Vary nicely done.

Share this post


Link to post
Share on other sites

Posted · Report post

Great job on the trailer man..the kart is no slouch either :D your right it could have been made for it!

Share this post


Link to post
Share on other sites

Posted · Report post

Really slick piece...nice airbrush work too !

Share this post


Link to post
Share on other sites

Posted · Report post

Excellent little combo :D

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0