Jump to content
Model Cars Magazine Forum

AMT 1959 EL Camino..Done


Recommended Posts

This build is for another forum (H.A.M.B.) build off,but I thought

I'll post it here too. It's a AMT 59 EL Camino. Going to add bubble

skirts with 3 spears in each opening. Haven't decided on rolling stock

yet. Keeping the original grill and tail lites.Getting rid of the door handles.

and the Chevy scripts.Thinking of a two tone finish for this build.

And of course ...some scallops

DSCN1688-vi.jpg

This pic shows the 4 Fred Cady decal sheets I picked up from Jim Heller

here in Richmond. Got a white,red,gold and silver sets.

DSCN1675-vi.jpg

James aka Joker

Edited by Joker
Link to comment
Share on other sites

This build is for another forum (H.A.M.B.) build off,but I thought

I'll post it here too. It's a AMT 59 EL Camino. Going to add bubble

skirts with 3 spears in each opening. Haven't decided on rolling stock

yet. Keeping the original grill and tail lites.Getting rid of the door handles.

and the Chevy scripts.Thinking of a two tone finish for this build.

And of course ...some scallops

DSCN1688-vi.jpg

This pic shows the 4 Fred Cady decal sheets I picked up from Jim Heller

here in Richmond. Got a white,red,gold and silver sets.

DSCN1675-vi.jpg

James aka Joker

I'm likin' those skirts on the Elky.
Link to comment
Share on other sites

Thanks Y'all..

Here is Jim Heller's evilbay link..he's from Richmond and a slot car nut !

He dosen't have a web address yet..he is working on one tho.

http://www.ebay.com/itm/Custom-Hot-Rod-Scallops-1-24-1-25-Waterslide-Decal-511-/221006324790?_trksid=m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D404869475660759055&_qi=RTM1084481

Thanks for the suggestions..but the killer skirts and the two tone metallic orange and white lightning

color scheme are set in stone...LOL

Might go with some Ben Hur style full wheel covers ...hahahaha

Link to comment
Share on other sites

This is what happens when primer is applied..

The black Dupli-Color primer looked sinister.....so I

broke out some pinner white walls and stash box rims

just for a look see..not too shabby..maybe for my next

El Camino ..I'll go Street Terror ! LOL

RSCN1750-vi.jpg

DSCN1751-vi.jpg

DSCN1749-vi.jpg

James aka Joker

Link to comment
Share on other sites

It looks great in black suede, but I agree - stick with your plan. The cruiser skirts go perfectly with the lines of the body, flowing down at the same curve as thew quarter panel. I'll be watching this build... and the black-primered followup!

Link to comment
Share on other sites

Back on track..Kustom track

not the Street Terror track...hahaha

Shaved off the door handles and side scripts,

also removed the tailgate round thingie...

Added the spears to the skirt openings

I made them with half round .040" styrene

sanded them to a point with a sanding stick.

I'm making an orange and white tear drop shifter

as soon as I get some orange styrene.

DSCN1754-vi.jpg

DSCN1759-vi.jpg

RSCN1761-vi.jpg

Close up pix of tear drop shifter..taken by G.H.

RAMSMeeting752012030-vi.jpg?1341617464

This pic taken by G.H. at a RAMS club meet.

RAMSMeeting752012027-vi.jpg?1341617437

James aka Joker

Link to comment
Share on other sites

UPDATE...

Got the white walls and Sombrero Caddy hubcaps from

a 49 Merc ...needed to add cones to the center ..so I

sanded down some spot lites to fit.Also sprayed some mettalic

silver over the primer and then sprayed Roadstar Florida Orange.

Made a hard bed cover to replace the tuck and roll cover that was

in the kit.

RSCN1765-vi.jpg

DSCN1766-vi.jpg

James aka Joker

Link to comment
Share on other sites

Thanks Y'all..

Good news/Bad news..

Bad news is that I dropped the interior bucket..grrrr

Gotta resand and paint..np

Good news..got a Boot Hill skeleton for a driver.

Broke all his joints and reset them in a driver position.

Had to shorten his spine some so his skull wouldn't hit the ceiling..hahaha

Also removed his pistol and holster. He was molded in orange but will get

the treatment later on today.

RSCN1769-vi.jpg

RSCN1770-vi.jpg

James aka Joker

Link to comment
Share on other sites

I raided a Monogram 59 hardtop for parts..

Got the front bumper with over ride and the two piece air vent "eye brows"

they have a chrome trim that is attached to the hood.

Finished the Amber and White turn signal and shifter.

My "driver" looks a little too over done..might have to

redo the treatment.

I also got the hard top steering wheel..the kit one looks too plain.

RSCN1780-vi.jpg

RSCN1779-vi.jpg

RSCN1778-vi.jpg

waiting on the interior to gas out some more before

sanding ...etc etc etc

James aka Joker

Link to comment
Share on other sites

Minor Major paint boo boo...grrr

The Testors White Lightning coat bubbled on me..

I must have contaminated the driver side some how.

Didn't want to loose any detail by sanding so into the

tank it goes.

RSCN1800-vi.jpg

LA degreaser

DSCN1799-vi.jpg

James the jokes on me...hahahahaha

Link to comment
Share on other sites

The Dollar Store Awesome degreaser did a number on the Testors paint.

Scrubbed the paint off with a toothbrush, some warm water and some elbow

grease. The Dupli-Color black primer and the Dupli-Color Silver mettalic

paint were untouched..weird.So for now I'm happy the Testors was removed

the body is going to get a light sanding and then repainted...

Stay tuned..

DSCN1803-vi.jpg

DSCN1804-vi.jpg

Joker

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...