jackdog Posted November 13, 2012 Share Posted November 13, 2012 Just finished this long sitting project and thought I would share it with you guys. Quote Link to comment Share on other sites More sharing options...
Casey Posted November 13, 2012 Share Posted November 13, 2012 Gorgeous. Quote Link to comment Share on other sites More sharing options...
John Teresi Posted November 13, 2012 Share Posted November 13, 2012 Tim.......thank you for sharing.........you did an AWESOME BEAUTIFUL job. Quote Link to comment Share on other sites More sharing options...
jackdog Posted November 13, 2012 Author Share Posted November 13, 2012 Thanks. I was going to give some info in my first post but when I previewed I couldn't go back. It's been lowered a lot and had to make the front tires shorter so it would have a big n little tire combo. The back mags widened by using some extra wheel back halfs and fitting them to the front of the wheel. Had to trim the apron under the grill for ground clearance. Filled the hood so it has a 3 piece hood and filled the notches where the roof sits. The roof was made from the stock roof in the Big T. Paint is testors spray can red. Lowered the headlights by filling in the mounting hole on the fenders and trimming of a little of the ends of the headlight bar so it sits lower on the fenders. Again thanks. Quote Link to comment Share on other sites More sharing options...
vintagedragfan Posted November 13, 2012 Share Posted November 13, 2012 very nice build Tim, looks awesome! Quote Link to comment Share on other sites More sharing options...
cobraman Posted November 13, 2012 Share Posted November 13, 2012 Sweet ! Quote Link to comment Share on other sites More sharing options...
soonerolds Posted November 14, 2012 Share Posted November 14, 2012 very nice, clean build. Quote Link to comment Share on other sites More sharing options...
hacked Posted November 14, 2012 Share Posted November 14, 2012 just wow, very clean Quote Link to comment Share on other sites More sharing options...
s29 sprintcar fan Posted November 14, 2012 Share Posted November 14, 2012 mate this is gorgeous i love it,I just picked up one of these kits from ebay Quote Link to comment Share on other sites More sharing options...
Sixties Sam Posted November 14, 2012 Share Posted November 14, 2012 Wow! My eyes! Red really pops! Great job on the modifications. The top is really well done, and I like the lowering job. Great work! Sam Quote Link to comment Share on other sites More sharing options...
Brudda Posted November 17, 2012 Share Posted November 17, 2012 Very Nice!!!! Tim, what tires did you use in the front?The car really looks great! It sits just right. Quote Link to comment Share on other sites More sharing options...
jackdog Posted November 18, 2012 Author Share Posted November 18, 2012 Very Nice!!!! Tim, what tires did you use in the front?The car really looks great! It sits just right. I used the front goodyears that came in the kit. I cut the opening larger where the wheel mounts out to the rib that is under the goodyear lettering. Then rap the tire around the wheel and cut off the excess and super glue together. When I put the tire on the car I made sure to have the cut part up in the fender. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Draggon Posted November 19, 2012 Share Posted November 19, 2012 Over the top! I love how low you got it, you rarely see these big scale Deuces that low. Looks like it came right out of the pages of Street Rodder mag. Fantastic! Quote Link to comment Share on other sites More sharing options...
baddgass Posted November 20, 2012 Share Posted November 20, 2012 " O " so nice, beautiful work. Quote Link to comment Share on other sites More sharing options...
TedsModeling Posted November 24, 2012 Share Posted November 24, 2012 Tim - Looks really nice. Are those the wheels from the kit? How about some engine and interior pics? Quote Link to comment Share on other sites More sharing options...
crazyrichard Posted November 24, 2012 Share Posted November 24, 2012 awsome ... when i have build what i have planned in 1/24-25 i def will build a big scale rod !! just stunning and clean i love it Quote Link to comment Share on other sites More sharing options...
TedsModeling Posted November 25, 2012 Share Posted November 25, 2012 Richard - they say once you go big, you never go back. I think that's how it goes! Quote Link to comment Share on other sites More sharing options...
ajwheels Posted November 25, 2012 Share Posted November 25, 2012 I used the front goodyears that came in the kit. I cut the opening larger where the wheel mounts out to the rib that is under the goodyear lettering. Then rap the tire around the wheel and cut off the excess and super glue together. When I put the tire on the car I made sure to have the cut part up in the fender. Hope this helps. Too cool...........that's the way to make that work................Nice................. Tony Quote Link to comment Share on other sites More sharing options...
surfjunke Posted November 25, 2012 Share Posted November 25, 2012 WOW! What a beautiful build! Great work! Quote Link to comment Share on other sites More sharing options...
topher5150 Posted November 27, 2012 Share Posted November 27, 2012 ######...I can't stop staring at that red. Quote Link to comment Share on other sites More sharing options...
Roadracer Posted December 5, 2012 Share Posted December 5, 2012 Very nice Deuce! Quote Link to comment Share on other sites More sharing options...
rmvw guy Posted December 5, 2012 Share Posted December 5, 2012 I say REAL. Oh wait, thats Harry's thread. It does look real and beautiful. Nice job! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.