PatW Posted December 4, 2021 Share Posted December 4, 2021 A different F1 car, the Aoshima Ogre AN-21 Quote Link to comment Share on other sites More sharing options...
PierreR89 Posted December 4, 2021 Share Posted December 4, 2021 Bought this today. Brings back alot of memorys from when i was little and my dad sometimes drove a Volvo f12 dumptruck when his N12 dumptruck was at the shop getting repaired. I also drove one from time to time when i worked as a mechanic to pull trailers in to the shop. I could have bought the new release from Italeri but for a true scandinavian truck they always have 3 axles to be able to handle the wintermonths. Maybe i make it in to the dumptruck my dad used to drive or i try to make it look like revells volvo f12 australia did, or just stock and paint it like the one i used to drive from time to time during my 7 years as a truck mechanic. 1 Quote Link to comment Share on other sites More sharing options...
Mike C. Posted December 4, 2021 Share Posted December 4, 2021 Last night while searching for one of the headers for the future1/16 Nomad project I'm amassing for, I found all of these. Off road tire/wheel sets that I completely forgot I bought many years ago. Now I have to find some projects to use them on. This morning I raced out to the Lobby (they still have 40 percent off model kits) and grabbed a Firestone F 150. I have some extra blue metallic that would look nice. Quote Link to comment Share on other sites More sharing options...
Mike C. Posted December 4, 2021 Share Posted December 4, 2021 Sorry about all the redundant photos, I think my phone has gone haywire. 🤪 Quote Link to comment Share on other sites More sharing options...
Spottedlaurel Posted December 4, 2021 Share Posted December 4, 2021 1 hour ago, Mike C. said: Last night while searching for one of the headers for the future1/16 Nomad project I'm amassing for, I found all of these. Off road tire/wheel sets that I completely forgot I bought many years ago. Now I have to find some projects to use them on. This morning I raced out to the Lobby (they still have 40 percent off model kits) and grabbed a Firestone F 150. I have some extra blue metallic that would look nice. Nice, I've never seen those available as accessory sets before. Quote Link to comment Share on other sites More sharing options...
Mike C. Posted December 4, 2021 Share Posted December 4, 2021 I remember getting them off of ebay. This was so long ago that I completely forgot that I bought so many sets. I can only remember seeing the Aoshima set on that 4 door Toyota Hilux recently. The really big Set is from the So Real '75 Blazer I posted a few weeks ago. I was thinking of saving them for a 1/18 project. Clean off your benches boys! You never know what you forgot you had. Especially when you get past 55. 🤔 Quote Link to comment Share on other sites More sharing options...
Robberbaron Posted December 4, 2021 Share Posted December 4, 2021 Picked up the Atlantis Mooneyes dragster at my LHS - last one on the shelf. Came home and my order from Jimmy Flintstone was waiting for me. Good way to end the work week. 1 Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted December 5, 2021 Share Posted December 5, 2021 (edited) Got Probed today!! Edited December 5, 2021 by martinfan5 1 1 Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted December 5, 2021 Share Posted December 5, 2021 Went to Hobby Lobby and to my surprise they HAD 1 of the 442 Cutlass Hard Top kits. Quote Link to comment Share on other sites More sharing options...
SfanGoch Posted December 5, 2021 Share Posted December 5, 2021 9 hours ago, Robberbaron said: Picked up the Atlantis Mooneyes dragster at my LHS - last one on the shelf. Atlantis announced that the entire initial production run is sold out. Quote Link to comment Share on other sites More sharing options...
kelson Posted December 5, 2021 Share Posted December 5, 2021 On 12/2/2021 at 4:58 PM, Khils said: An opportunity presented itself last week...my good friend George Bojaciuk posted up some products available from "Canuck 3D model parts" ....being items of projects deep in my sub-conscience.... I pulled the trigger. I bought the 1973 Chevrolet Monte Carlo conversion (front header panel/grill, w/ headlamp lenses,front bumper,tail light panel, rear bumper & added the stock full front bench seat) also snagged the '98 - '02 s10 front grill with light lenses & valance, & added the bucket seats with console. Wow!! Wylde's products are absolutely stunning! THX George!! Wylde! ....I'll be hittin' up your site real short-like!! Good looking parts,i'm interested in his conversion parts as well,was there a long wait to receive them?. Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted December 5, 2021 Share Posted December 5, 2021 I'm sure I'm on a mission to build some of the worst kits I've heard about, Lol. I picked this '73 Mustang up to see if the rumours are true. The '69 Country Charger and '77 Pinto certainly didn't disappoint in regards to what's labelled as a "bad kit" Since I picked up model building again I think I've found the type of building I like, rough but simple kits that need a little more than just gluing together. 1 Quote Link to comment Share on other sites More sharing options...
Khils Posted December 5, 2021 Share Posted December 5, 2021 1 hour ago, kelson said: Good looking parts,i'm interested in his conversion parts as well,was there a long wait to receive them?. PM sent Quote Link to comment Share on other sites More sharing options...
Casey Posted December 6, 2021 Share Posted December 6, 2021 Picked up a few things today 😊 Quote Link to comment Share on other sites More sharing options...
slusher Posted December 6, 2021 Share Posted December 6, 2021 21 hours ago, martinfan5 said: Got Probed today!! I have not seen one of those in a while friend. Miss you around here brother.. 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted December 6, 2021 Share Posted December 6, 2021 3 hours ago, doorsovdoon said: I'm sure I'm on a mission to build some of the worst kits I've heard about, Lol. I picked this '73 Mustang up to see if the rumours are true. The '69 Country Charger and '77 Pinto certainly didn't disappoint in regards to what's labelled as a "bad kit" Since I picked up model building again I think I've found the type of building I like, rough but simple kits that need a little more than just gluing together. Grareth you ar the man for these short fall kits my man… Quote Link to comment Share on other sites More sharing options...
Sledsel Posted December 6, 2021 Share Posted December 6, 2021 Was at Harbor Freight and ended up with a mini hack saw. Works much better than my hobby drag saw and is was only $4 Quote Link to comment Share on other sites More sharing options...
Mattilacken Posted December 6, 2021 Share Posted December 6, 2021 I jus had to get this one. Sealed for 54$ inc shipping. Not much for sealed kits so if anyone have one to trade that is complete body wise, since I don’t care for any other parts in it, but opened I can be open for such a trade. If no one have one to trade this one will be opened 😆 Quote Link to comment Share on other sites More sharing options...
CabDriver Posted December 7, 2021 Share Posted December 7, 2021 Picked this up - I wanna build a detailed-up ‘70 Chevy pickup, and apparently this makes a good donor for the frame and suspension and whatnot… Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted December 7, 2021 Share Posted December 7, 2021 Picked these up yesterday from a guy at work. The Beemer is sealed. The other two are sealed inside. Later- 1 Quote Link to comment Share on other sites More sharing options...
Classicgas Posted December 7, 2021 Share Posted December 7, 2021 Was expecting a set of wheels from a member here, got this instead. Quote Link to comment Share on other sites More sharing options...
Rodent Posted December 8, 2021 Share Posted December 8, 2021 7 hours ago, Modlbldr said: The Beemer is sealed. I don't remember ever seeing that one. Folks seem to want a lot of money on FleaBay for them. Quote Link to comment Share on other sites More sharing options...
Exotics_Builder Posted December 8, 2021 Share Posted December 8, 2021 1 minute ago, Rodent said: I don't remember ever seeing that one. Folks seem to want a lot of money on FleaBay for them. Built that one when it first came out in the late 70's. Not a bad kit for the time. Quote Link to comment Share on other sites More sharing options...
Casey Posted December 9, 2021 Share Posted December 9, 2021 Picked up this one to pair with the BSA I bought earlier this year: 2 Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted December 9, 2021 Share Posted December 9, 2021 Got my MPC 'USA-1' '74 Vega Pro Stock kit reissue today...haven't had a chance yet to compare it with the earlier Grumpy's Vega '72 release. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.