BlackSheep214 Posted June 25, 2022 Share Posted June 25, 2022 Thrift stores, antique stores, consignment shops, garage sales are good places to find kits... IF you get lucky. Great find indeed. Quote Link to comment Share on other sites More sharing options...
Russell C Posted June 25, 2022 Share Posted June 25, 2022 (edited) I need another project like I need another hole in my head. But I also have a really soft spot in my heart for old good quality builds on eBay estate (?) sale-looking auctions that seem like they are being neglected by bidders. Got it with a single bid, $29 total including shipping. Seller had another dual engine roadster, which somebody else saved with a single bid: https://www.ebay.com/itm/275352028692 . Really dusty, all photos here are of it mere minutes after unpacking from the shipping box this afternoon. Apart from the huge sink lines in the door panels, it's still in very good shape overall for paint & build quality, no other major sink areas where the fenders were filled front & rear. Distinctive details are the quad headlights / oval grille opening, fuelie engine, one-piece rear window, and TV in the trunk. Judging from the wire "hinges" for the doors & trunk lid, they were meant to be displayed permanently open, so that's why I can't put them all the way shut. It should shine up nice, and if there's only one bit of remaining minor glue holding the body on, I might be able to pop it off to clean the interior. Can't say I understand what the "thing" is (looks like the pulley end of a 2-part alternator) n the oval grille opening area, or the choice of what appears to be unfinished taillights at the back, though. Anybody recognize it from ancient '60s model car mags? Edited July 15, 2022 by Russell C 2 Quote Link to comment Share on other sites More sharing options...
br67 Posted June 25, 2022 Share Posted June 25, 2022 7 hours ago, Russell C said: I need another project like I need another hole in my head. But I also have a really soft spot in my heart for old good quality builds on eBay estate (?) sale-looking auctions that seem like they are being neglected by bidders. Got it with a single bid, $29 total including shipping. Seller didn't answer my question on if the builder was known - had another dual engine roadster, which somebody else saved with a single bid: https://www.ebay.com/itm/275352028692 . Really dusty, all photos here are of it mere minutes after unpacking from the shipping box this afternoon. Apart from the huge sink lines in the door panels, it's still in very good shape overall for paint & build quality, no other major sink areas where the fenders were filled front & rear. Distinctive details are the quad headlights / oval grille opening, fuelie engine, one-piece rear window, and TV in the trunk. Judging from the wire "hinges" for the doors & trunk lid, they were meant to be displayed permanently open, so that's why I can't put them all the way shut. It should shine up nice, and if there's only one bit of remaining minor glue holding the body on, I might be able to pop it off to clean the interior. Can't say I understand what the "thing" is (looks like the pulley end of a 2-part alternator) n the oval grille opening area, or the choice of what appears to be unfinished taillights at the back, though. Anybody recognize it from ancient '60s model car mags? Love these old builds Quote Link to comment Share on other sites More sharing options...
ewetwo Posted June 25, 2022 Share Posted June 25, 2022 That's a cool custom. Quote Link to comment Share on other sites More sharing options...
Mike C. Posted June 25, 2022 Share Posted June 25, 2022 Shipment arrived today. Lotus type 33 and some paints. Never built a formula 1 car but this one captures the era of racing I really like. How does the old saying go. When sex was safe and racing was dangerous. The Lotus looks a bit of a daunting task with tons of small parts and I still have tons of stuff on the bench before I ever get to it. Funny thing about the Tamiya model, no plastic shrink wrap. No attempt to seal it at all. I suppose they're going green or something. Quote Link to comment Share on other sites More sharing options...
lordairgtar Posted June 25, 2022 Share Posted June 25, 2022 28 minutes ago, Mike C. said: Shipment arrived today. Lotus type 33 and some paints. Never built a formula 1 car but this one captures the era of racing I really like. How does the old saying go. When sex was safe and racing was dangerous. The Lotus looks a bit of a daunting task with tons of small parts and I still have tons of stuff on the bench before I ever get to it. Funny thing about the Tamiya model, no plastic shrink wrap. No attempt to seal it at all. I suppose they're going green or something. They normally do not shrink wrap kits in Japan or Europe. Just a little round tape at the sides like was done in the USA pre 1965. Quote Link to comment Share on other sites More sharing options...
Mike C. Posted June 25, 2022 Share Posted June 25, 2022 No round tape either. Quote Link to comment Share on other sites More sharing options...
Dpate Posted June 25, 2022 Share Posted June 25, 2022 22 minutes ago, Mike C. said: No round tape either. If you ordered it off ebay depending on the seller and where he got it from. I know if you order kits from plazajapan they will come without shrink wrap and tape. You can see the contents right on the site before you order the kit. I've had my eyes on that kit for awhile myself just haven't gotten it yet. Quote Link to comment Share on other sites More sharing options...
Mike C. Posted June 25, 2022 Share Posted June 25, 2022 MegaHobby. Quote Link to comment Share on other sites More sharing options...
keyser Posted June 25, 2022 Share Posted June 25, 2022 Ebbro rebox so wouldn’t be same. I like these almost as much as the tires were skinny and drivers were fat era. 😃 1 Quote Link to comment Share on other sites More sharing options...
RSchnell Posted June 25, 2022 Share Posted June 25, 2022 Went to a local show this morning and picked up a few things. Nothing earth shattering, just a few good deals. Will post event photos in the show coverage section later today 1 Quote Link to comment Share on other sites More sharing options...
Dpate Posted June 26, 2022 Share Posted June 26, 2022 5 hours ago, Mike C. said: MegaHobby. Dunno who there supplier is, but if you check out this link you'll see how they come. Even aoshima etc come the same way. https://www.plazajapan.com/4526175200275/?setCurrencyId=6 Quote Link to comment Share on other sites More sharing options...
ChrisBcritter Posted June 26, 2022 Share Posted June 26, 2022 Finally picked up a model of my first car, even if only in HO scale: It's the correct color, too - Shore Green. This one's been tough to find for some reason - either the wrong color or they're N scale, like HO wasn't small enough already... 4 Quote Link to comment Share on other sites More sharing options...
CabDriver Posted June 26, 2022 Share Posted June 26, 2022 Does the new floor mat for my shop count? 🤪 3 Quote Link to comment Share on other sites More sharing options...
Straightliner59 Posted June 26, 2022 Share Posted June 26, 2022 19 minutes ago, CabDriver said: Does the new floor mat for my shop count? 🤪 Awesome! Now, you have a place to play with them! 😁 2 1 Quote Link to comment Share on other sites More sharing options...
Brudda Posted June 26, 2022 Share Posted June 26, 2022 Minilites 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted June 26, 2022 Share Posted June 26, 2022 On 6/24/2022 at 11:31 AM, Modlbldr said: Driving home this morning and saw a Yard Sale sign. Stopped to find most of the normal garbage. I asked if they had any model kits. The guy brought out these that he had said he had for years. Both complete and unstarted. The Duster is still sealed inside. Got them both for $15. Now I'm looking for more Yard Sales on the way home. Just stopped at my second. Lol. Later- You had quite a bit of some really great models Tom! Quote Link to comment Share on other sites More sharing options...
ewetwo Posted June 26, 2022 Share Posted June 26, 2022 I actually got the parts I needed to build my MPC Super Stocker GTO on Friday from Khils (Kevin Hilsabeck). Body. Hood. Glass. Headers. Decals and instructions. I’ve never built a car like this so It should be interesting. Thank you Kevin! 1 Quote Link to comment Share on other sites More sharing options...
HomerS Posted June 26, 2022 Share Posted June 26, 2022 Local model swap meet. $110 for the two JoHans. Ambulance is complete....wheels are on the stretcher. Both are complete and the back doors work $5 for the trailer 4 Quote Link to comment Share on other sites More sharing options...
papajohn97 Posted June 27, 2022 Share Posted June 27, 2022 (edited) On 6/25/2022 at 9:28 AM, Mike C. said: Shipment arrived today. Lotus type 33 and some paints. Never built a formula 1 car but this one captures the era of racing I really like. How does the old saying go. When sex was safe and racing was dangerous. The Lotus looks a bit of a daunting task with tons of small parts and I still have tons of stuff on the bench before I ever get to it. Funny thing about the Tamiya model, no plastic shrink wrap. No attempt to seal it at all. I suppose they're going green or something. Hi Mike , I built this one recently which includes some of the molded parts from the Tamiya Lotus 25 along with new tooled parts from Ebbro. The best part of this kit is the machined aluminum injector stacks that are included, wish these were available aftermarket. I had a bear of a time getting the upper cowling and engine cover to fit/ fully seat onto the lower tub. I recommend doing lots of dry-fitting and tuning if your kit parts fit like mine did (hopefully yours will fit better!). The assembly and alignment of the exhaust headers was also a test. It’s a beauty when completed and I hope someday to build another one of these along with a Lotus 25. Good luck! John Edited June 27, 2022 by papajohn97 Spelling, content 8 Quote Link to comment Share on other sites More sharing options...
Mike C. Posted June 27, 2022 Share Posted June 27, 2022 Looks great John! I hope mine comes out 1 10th as nice looking.Thanks for the tip on the cowl. You're right, those headders look like a bit of a daunting task. Gonna be a while until I get to this build. I have at least 10 other projects on the bench in front of this one. I always liked the wheels on these. Kind of reminiscent of the Torq Thrusts we saw on the musclecars in the 60s and 70s, 😎 Quote Link to comment Share on other sites More sharing options...
papajohn97 Posted June 27, 2022 Share Posted June 27, 2022 Mike, on the Lotus 33 headers, leave the bond joints between headers and block to the very end, after you’ve aligned the header extensions and wire support thingy that’s attached to the rear of the chassis. If you follow the instructions and pre-bond the headers to the block earlier on, you’ll regret it. Almost took a hammer to one I built after following the instructions! Quote Link to comment Share on other sites More sharing options...
Mike C. Posted June 27, 2022 Share Posted June 27, 2022 Thanks for the tip. That instruction sheet looks like a copy of war and peace. 😲 Quote Link to comment Share on other sites More sharing options...
kelson Posted June 27, 2022 Share Posted June 27, 2022 Today's mail call🤠 3 Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted June 27, 2022 Share Posted June 27, 2022 (edited) Some fun stuff in today’s mail. Edited June 28, 2022 by unclescott58 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.