Ace-Garageguy Posted November 25, 2012 Share Posted November 25, 2012 (edited) SEPT. 2015 EDIT: This one has made it back on the bench, specifically because of the availability of the new Revell nailhead engine, and the beautifully sculpted '32 rails. The old AMT rails I'd started modifying for this build are being recycled into another '29/'32 Ford build I'll begin posting shortly, but for this one, I'll be staying with the old AMT '29 body shell. This is one instance where the '32 rails in Revell's newest kit can be shown-off to good advantage. I'll be correcting the port-spacing on the new nailhead too. The streetable water pump/front cover setup and the multiple carb option in the Revell kit will figure prominently on this one as well. This one was inspired by a series of illustrations by Eric Black in the Jan. 2011 Rod & Custom. Though they were on model A rails, this is very similar. I MAY channel this car just a tad, as Eric's version looks a little more slender, and that's part of its appeal to me. Started with another gluebomb with multiple coats of horrible paint....... After a 2-day stripper bath, and another AMT '32 blob frame, getting modified..... Stance and overall look dialled in. Port spacing on the headers is wrong for a nailhead....I'll fix it. This one will also get a scratched DuVall with a different design....maybe a Hallock. A mildly-chopped '32 radiator shell leaves plenty of ground clearance, allows the cowl line to flow nicely, and avoids the monkey-face look of a too-severe chop. A '32 hood gets narrowed to fit the '29 cowl, as well as the '32 shell. Interior will be button-tuft with a vintage-look roll bar hoop. NOTE: The mockup engine here is the old Monogram Orange Hauler nailhead. Though it's labeled 1/24, it's so close to 1/25 as to be entirely unnoticeable. It has a molded one piece engine top that won't be usable for this build. Edited November 10, 2016 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
dartman Posted November 25, 2012 Share Posted November 25, 2012 Looks like a good plan.Will be following this one. Quote Link to comment Share on other sites More sharing options...
Gluhead Posted November 25, 2012 Share Posted November 25, 2012 AyeayeAYE! Yum. Quote Link to comment Share on other sites More sharing options...
Ira Posted November 25, 2012 Share Posted November 25, 2012 GREAT START!!! Quote Link to comment Share on other sites More sharing options...
nate47 Posted November 25, 2012 Share Posted November 25, 2012 You have my attention Quote Link to comment Share on other sites More sharing options...
cobraman Posted November 25, 2012 Share Posted November 25, 2012 Thats going to be very cool. Quote Link to comment Share on other sites More sharing options...
MachinistMark Posted November 25, 2012 Share Posted November 25, 2012 Gorgeous Quote Link to comment Share on other sites More sharing options...
crazyjim Posted November 25, 2012 Share Posted November 25, 2012 I think I like what's going on here. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted November 25, 2012 Author Share Posted November 25, 2012 Thanks a lot guys. From looking at the profile shot, I think the nose is just a twitch too low. Maybe bring it up to where the line of the hood is tangent to the top of the tire. Quote Link to comment Share on other sites More sharing options...
H.A.K Posted November 25, 2012 Share Posted November 25, 2012 That's kool man. Quote Link to comment Share on other sites More sharing options...
James2 Posted November 26, 2012 Share Posted November 26, 2012 Thanks a lot guys. From looking at the profile shot, I think the nose is just a twitch too low. Maybe bring it up to where the line of the hood is tangent to the top of the tire. I like it. Would be better to lower the rear just a tad? Quote Link to comment Share on other sites More sharing options...
crazyrichard Posted November 26, 2012 Share Posted November 26, 2012 awsome looks , those wheels look sweeeet Quote Link to comment Share on other sites More sharing options...
John Teresi Posted November 26, 2012 Share Posted November 26, 2012 Bill.......looks GREAT man.........cool project. Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted November 26, 2012 Share Posted November 26, 2012 (edited) Maybe I missed it, what color were you thinking of using? Edited November 26, 2012 by Modelbuilder Mark Quote Link to comment Share on other sites More sharing options...
ZTony8 Posted November 26, 2012 Share Posted November 26, 2012 I think it has a nice stance the way it presently sits.But if you raise the front portion of the hood you might want to lower the rear of the body so the side profile doesn't take on the shape of a banana. Quote Link to comment Share on other sites More sharing options...
W-409 Posted November 27, 2012 Share Posted November 27, 2012 Nice project, as always! I like the look already, this'll turn out fantastic, I guess! Where is the Nailhead engine from, that's something I'd like to have in Hot Rod too. Quote Link to comment Share on other sites More sharing options...
Space Cowboy Posted November 27, 2012 Share Posted November 27, 2012 That is a great looking start so far..Keep it coming...................... Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted September 7, 2015 Author Share Posted September 7, 2015 Stand by for updates shortly, swapping in bits from the new Revell '29 kit. Quote Link to comment Share on other sites More sharing options...
Dennis Lacy Posted September 7, 2015 Share Posted September 7, 2015 This is my first time seeing this project, at all, and I can't wait to see an update. Using the new frame sure is going to save you a bunch of thankless work over that old AMT frame. I really like the overall look of the car. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted September 7, 2015 Author Share Posted September 7, 2015 Thanks for your comments, Dennis. You're right about the new Revell frame saving a lot of work. I've started mocking her up, and all I really need to do is pinch the rails just a tad more to fit better under the old AMT '29 shell. This is a shot of Eric Black's original illustration that inspired the build. I'll probably iron the pages and get a better shot of this later too. Quote Link to comment Share on other sites More sharing options...
Bernard Kron Posted September 7, 2015 Share Posted September 7, 2015 Liked this a bunch on the first go-round but I must admit the crispness of the new Revel rails will add a lot to the final result. I'm a bit disappointed to see how much the frame rails extend beyond the AMT shell. It's far from a drop fit given the standards that you set for yourself in these builds. The Eric Black illustration certainly highlights the problem with the Revell headers - the grouped pairs look is somewhat lost on them and quite apparent in the rendering. I'm not sure I like the header covers along the frame rails, though... Looking forward to seeing this progress with your usual thoroughness with respect to matters both aesthetic and mechanical. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted September 8, 2015 Author Share Posted September 8, 2015 (edited) The Eric Black illustration certainly highlights the problem with the Revell headers - the grouped pairs look is somewhat lost on them and quite apparent in the rendering. I'm not sure I like the header covers along the frame rails, though... Looking forward to seeing this progress with your usual thoroughness with respect to matters both aesthetic and mechanical. Thanks for your interest, Bernard. Actually, the headers shown on the mockup are for a 1/24 scale Offy engine, and the port spacing is too regular for the nailhead. Revell's new kit (and the Eric Black illustration, it seems) both have the end-paired ports a little too close together, and the center ports a little too far apart. This is the Tim Boyd photo of the new kit headers, and though they would be a vast improvement over what I have on the early mockup shown above, they're still not quite right. The port-spacing on the 50+ year-old Revell nailheads (Tommy Ivo and parts-pack versions) is spot-on correct (OK...it's about 1/4 scale inch off), and I'll be seeing what it will take to get the NEW Revell nailhead dialed in to match the OLD one. (The orange and white engine in the mockup above is the unit from the Monogram 1/24 Orange Hauler...which scales pretty close to 1/25 actually...backed up with a Dynaflow automatic. I'll be using the new Revell nailhead in its place, but backing it with the old parts-pack manual gearbox rather than the molded-on automatic) Edited September 8, 2015 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
Dennis Lacy Posted September 8, 2015 Share Posted September 8, 2015 I'm not sure I like the header covers along the frame rails, though...It took me a double take to realize the roadster in the illustration is not on a '32 frame. The header covers are trimmed up Model A splash aprons that mimic the shape of the cove in a '32 frame.There's some really neat details going on in that illustration. I dig how the pitman arm is curved to match the shape of the cowl line just behind it.It's also a shame that you can't get those Deluxe Champion Firestone style tires in skinny front 450-18 if one were to build the real car. Quote Link to comment Share on other sites More sharing options...
frozono Posted September 8, 2015 Share Posted September 8, 2015 WOW..... looks awesome !!!!! Quote Link to comment Share on other sites More sharing options...
exesivefire Posted September 8, 2015 Share Posted September 8, 2015 Another spot on concept, can't wait to see what's you do here Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.