Jump to content
Model Cars Magazine Forum

AMT 64 mercury marauder


diymirage

Recommended Posts

I just did my 1st BMF before primer & paint. I used a pencil eraser to rub off the paint between each coat & it worked out very well. I only did the letters & small emblems, the actual trim is bold enough to do after paint........l'd call it a 427 too, artistic license, lol !

Link to comment
Share on other sites

thanks for the advise guys

(ill advertise it as a 427)

as for the scripts, i will have to try that next time because the scripts on this baby are gone

(i put a wanted ad in the wanted section for help on this...hoping someone is able to "copy" the scripts for me)

on the bright side, i am one step closer to slapping paint on :mellow:

Link to comment
Share on other sites

When I want to replace/copy script like that, I press kitchen foil over them and get

it fully embossed in, then flip it offer and fill it with either putty, or liquefied kit styrene.

(scrap sprue melted in liquid cement.)

Made the missing GTO emblem for the trunk of my AMT 65 Goat.

My 64 Marauder is stashed so I can't get to it right away.

Link to comment
Share on other sites

allright guys, had a fe busy days

for starters, i got the interior done :)

im not 100 % pleased with it but this is where it will stay :)

1356241143.jpg

1356241116.jpg

i tried getting the stock seats in there but i couldnt get the finish to match what i had allready done to the back seat and i really liked the finish on these custom seats i i just went with them

its hard to capture in a picture but i like the way my gauges came out

i used the same wire i use to connect pieces of exhaust to paint on the needle

very pleased with the way that came out

i also got the engine installed and what a massacre that wat

1356241001.jpg

somehow i could not fit the belts and the supercharger in the engine bay while still seating the engine properly

it all ended up breaking off so its back to the drawing board on that on

i know i dont have an alternative intake and i dont want to just slap the pie tin air filter on so hopefully i can massage the supercharger set up back in there

in the mean time i also finished the fire wall

i will be putting some wire in the brake booster for effect later

1356240917.jpg

this is the last mock up before hitting the paint booth

1356241087.jpg

1356241059.jpg

1356241032.jpg

oh, and this is the paint that will go on there

1356240968.jpg

ive also decided on a paintsceme...it will be the same as on the hotwheels 64 custom galaxy from thier highway series ;)

Link to comment
Share on other sites

well totally botched up the paint on it

i went with some thinned out nailpolish

maybe it would have gone well over a white primer but shot over the grey it looks...well...grey

1356324141.jpg

1356324075.jpg

1356324033.jpg

1356324005.jpg

still havent decided if im keeping it or shooting over it

i guess it looks allright but its not what i had in mind :(

iether way, i will be adding black panels and racing stripes with white accents

Link to comment
Share on other sites

well, i decided to shoot the rest of the paint just to see how it would come out and i REALLY botched it up this time

i used a combination of tapes on this, tamiya for the main lines, painters for the big coverings and a third tape i dont know what it is, some plastic tape i bought at a model shop ages ago

well, the plastic tape turned out to be detrimental to the underlying paint job

when i removed it it pulled the paint right off...right down to bare plastic

i also screwed up the white when i taped it off for the black, on the side panel you can tell where i pressed the tape down before the paint was hard and it left indentations

here is what it looks like (actually happy with the design...just hate i screwed it up)

1356384435.jpg

1356384329.jpg

1356384360.jpg

1356384398.jpg

the body will go into the purple pond but at the same time i placed a post in the wanted section

not sure if ill be able to save this

Link to comment
Share on other sites

I have that paxton set up casted,for the twin carbs also.Are you still needing the emblems casted,i might know where a kit is.Sean

if you have a lead, i would really be interested

mine are comepletly gone

What a shame it was really looking great. I've even started to look for one of these because of your build. The good news I guess is a few hours in a zip lock bag with some oven cleaner and she'll be ready for paint again in no time.

i guess ill write it up as a trial version

the good news in im building in 1/25 scale

if this were to happen in 1:1 scale i'd be out thousand of dollars...now the damage is less then 10 bucks :)

hope you find a good one to build :)

Link to comment
Share on other sites

  • 2 weeks later...

here she is after about 2 weeks in the brake fluid and a final scrubbing with oven cleaner

1357171208.jpg

1357171183.jpg

i had to reglue both skirts and when that glue dries shes going back in primer

all in all im pretty pleased with how clean i managed to get her, thats mostly naked styrene again :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...