Junkman Posted February 19, 2013 Share Posted February 19, 2013 (edited) While you are waiting for new releases from the US you can appreciate what the Ukrainians tool up in the meantime. They announced to release 1/24 kits of two of the kits they already offer in 1/35 scale. The Mercedes G4: And a pre-war Opel Admiral Cabriolet: If they continue to release more of their 1/35 offerings in 1/24 scale, we might be in for some real treats, like: Opel Olympia: 1936 Packard Twelve: 1939 Opel Kapitän: Mercedes 770K: Mercedes 320: and a plethora of German, American and Russian WWII trucks and Soviet Cold War Trucks. Mind you, those kits already exist in 1/35 scale! I previously moaned about it here on this forum and said I wish they would make them in 1/24. I then wrote to the manufacturer and suggested to release those in 1/24 as well. Apparently someone is finally listening to me. Now what about some 1/24 scale airplanes? A Heinkel 219, a Polikarpov I-16.... Sigh... Edited June 17, 2013 by Gregg Quote Link to comment Share on other sites More sharing options...
Paul H Posted February 19, 2013 Share Posted February 19, 2013 That big Opel cabrio and the Packard are very tempting! Any idea if they are going to be full detail or kerbside? Out of interest, do you know whether the 1:35 versions are full detail? Somewhere recently I saw a review of a 1:35 small Merc staff car that was full detail - looked very impressive for that scale. Quote Link to comment Share on other sites More sharing options...
Junkman Posted February 19, 2013 Author Share Posted February 19, 2013 (edited) They all are full detail kits. All of them. And I think it is safe to assume that they are going to launch the Opel Admiral saloon version pretty soon. This was the same with the 1/35 versions. First came the cabriolet, then the saloon shortly after. Since those are multipiece bodies, only three parts need to be changed to make the saloon. The Packard would be a total winner globally. Imagine a hearse conversion. Edited February 19, 2013 by Junkman Quote Link to comment Share on other sites More sharing options...
Junkman Posted February 19, 2013 Author Share Posted February 19, 2013 You can stop dreaming. The G4 and Opel are reality soon. Apparently the prices are quite reasonable too, suggested retail is around 35€. OK, not cheap, but for a new full detail kit? I'd say sales will determine whether the line is going to be continued, but they will sell like hot butties to an audience deprived of anything really novel for decades, no doubt. Quote Link to comment Share on other sites More sharing options...
sjordan2 Posted February 19, 2013 Share Posted February 19, 2013 Is the 1/35 Opel Admiral kit the same as the Revell version? Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted February 19, 2013 Share Posted February 19, 2013 That Opel is a neat car. And if they did that Packard, I seriously know half a dozen people who would buy at least one, including me. 35 Euros, at a shirtsleeve estimate, is about $40 U.S. No, not cheap, but if they're a good product, I wouldn't refuse one, either. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
Junkman Posted February 19, 2013 Author Share Posted February 19, 2013 Is the 1/35 Opel Admiral kit the same as the Revell version? It's the other way around. Revell AG markets the ICM kits in Germany in their own boxes. Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted February 19, 2013 Share Posted February 19, 2013 The Packard would be a total winner globally. Imagine a hearse conversion. I'll second that. Quote Link to comment Share on other sites More sharing options...
Brett Barrow Posted February 19, 2013 Share Posted February 19, 2013 The Packard could happen. They did it in 35th because Stalin had one. Have to see how they sell in 24th. They've already done the hard part, the design work. Scaling up and cutting new steel is easy once you have the design done. Quote Link to comment Share on other sites More sharing options...
sjordan2 Posted February 19, 2013 Share Posted February 19, 2013 The Packard looks very much like the 1/16 1937 v12 issued by Entex, Minicraft and the other usual suspects. I've seen some gorgeous builds of that kit. Not only would it be a good hearse, it would make a nice 4-door convertible or woodie. Quote Link to comment Share on other sites More sharing options...
GeeBee Posted February 19, 2013 Share Posted February 19, 2013 That big Opel cabrio and the Packard are very tempting! Any idea if they are going to be full detail or kerbside? Out of interest, do you know whether the 1:35 versions are full detail? Somewhere recently I saw a review of a 1:35 small Merc staff car that was full detail - looked very impressive for that scale. Are you talking about the Master Box German staff car ?? if so, I did the build and reveiw for a military magazine on that one, and yes it was a full detail kit, and very nice too, if a little on the small side, as I'm used to 1:24th scale .... Quote Link to comment Share on other sites More sharing options...
GeeBee Posted February 19, 2013 Share Posted February 19, 2013 While you are waiting for new releases from the US you can appreciate what the Ukrainians tool up in the meantime. They announced to release 1/24 kits of two of the kits they already offer in 1/35 scale. The Mercedes G4: And a pre-war Opel Admiral Cabriolet: If they continue to release more of their 1/35 offerings in 1/24 scale, we might be in for some real treats, like: Opel Olympia: 1936 Packard Twelve: 1939 Opel Kapitän: Mercedes 770K: Mercedes 320: and a plethora of German, American and Russian WWII trucks and Soviet Cold War Trucks. Mind you, those kits already exist in 1/35 scale! I previously moaned about it here on this forum and said I wish they would make them in 1/24. I then wrote to the manufacturer and suggested to release those in 1/24 as well. Apparently someone is finally listening to me. Now what about some 1/24 scale airplanes? A Heinkel 219, a Polikarpov I-16.... Sigh... I'll be adding the Opel to the stash, thanks for sharing the photo's, however I've found they are actually doing two kits of the Opel Quote Link to comment Share on other sites More sharing options...
Paul H Posted February 19, 2013 Share Posted February 19, 2013 Are you talking about the Master Box German staff car ?? if so, I did the build and reveiw for a military magazine on that one, and yes it was a full detail kit, and very nice too, if a little on the small side, as I'm used to 1:24th scale .... All finished !! (4).JPG Yup, that looks like the one! The Packard looks very much like the 1/16 1937 v12 issued by Entex, Minicraft and the other usual suspects. I've seen some gorgeous builds of that kit. Not only would it be a good hearse, it would make a nice 4-door convertible or woodie. That's a stunning kit - I have the roadster in my to-build pile & the detail is excellent. Btw, here's the details of Revell's release of the 1:35 Opel Admiral - if the 1:24 is as good as this, it should be an excellent model: http://www.revell.de/index.php?id=210&KGKANR=0&KGKOGP=10&KGSCHL=73&L=1&page=1&sort=0&nc=&searchactive=&q=&SWO=&ARMAS4=&PHPSESSID=b51d3936d1cdeb50246da53abfba0b2c&KZSLPG=&offset=5&cmd=show&ARARTN=03099&sp=1 Quote Link to comment Share on other sites More sharing options...
Junkman Posted February 19, 2013 Author Share Posted February 19, 2013 Eat your heart out. The 1:24 Opel Admiral is your ticket to a Dubonnet GM 'Knee-Action' front suspension! Quote Link to comment Share on other sites More sharing options...
Erik Smith Posted February 19, 2013 Share Posted February 19, 2013 (edited) Nice! I have the 1/35 Opel - now, I guess the big brother is needed. The multi-piece bodies will be a turn off to some, but these are well detailed, neat kits. Thanks for the info! Edited February 19, 2013 by Erik Smith Quote Link to comment Share on other sites More sharing options...
Paul H Posted February 19, 2013 Share Posted February 19, 2013 The multi-piece bodies will be a turn off to some The way that the 1:35 ones are done suggests to my mind that they are intended to be used for dioramas, hence that method of construction allowing for doors etc to be displayed in the open position, as the body parts are mostly separated on what are panel gaps on the 1:1. Would be interesting to see if the same is done with the 1:24 versions. I'm undecided as to whether I like that method of construction, as it all depends on the individual car. E.g. for the Admiral, I don't think it detracts from the end result (& would certainly prompt me to want to add hinges so it would have all opening panels), but depending on the panel separation points, it may perhaps not work so well with a body like that on the Packard. Either way, I will be looking forward to hearing more about these releases, as it's been far too long since there were new 1;24 kits of this sort of vehicle (the last ones that spring to mind is Heller's excellent range), and with this sort of subject matter a multipart body wouldn't be enough to put me off provided that the detail is there. Quote Link to comment Share on other sites More sharing options...
Cato Posted February 19, 2013 Share Posted February 19, 2013 ... but they will sell like hot butties... Please describe EXACTLY what that refers to... Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted February 19, 2013 Share Posted February 19, 2013 The Opel Kapitan might be a good start to a Shark-nose Graham-Paige or a Huppmobile Skylark/Graham Hollywood. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
Edsel-Dan Posted February 19, 2013 Share Posted February 19, 2013 I too like many of these. But, where will they be available from in the US?? Quote Link to comment Share on other sites More sharing options...
niteowl7710 Posted February 20, 2013 Share Posted February 20, 2013 (edited) I too like many of these. But, where will they be available from in the US?? Unless Revell AG decides to co-brand them like they did some of the 1:35 kits, then the internet will have someplace to buy them. Squadron is their distributor in the States, but I'm sure you can import them from European retailers as well. It's all a matter of paying the shipping bill. Edited February 20, 2013 by niteowl7710 Quote Link to comment Share on other sites More sharing options...
Brett Barrow Posted February 20, 2013 Share Posted February 20, 2013 ICM has US distribution. I sell it. Not a lot of it, but I sell it. Any good old fashioned hobby shop or online retailer can get them, if they choose to. Not a big secret who they can get it from. The hard part is getting them to choose to carry it. Quote Link to comment Share on other sites More sharing options...
62rebel Posted February 20, 2013 Share Posted February 20, 2013 that Packard is a James Bond enthusiast must.... for the hearse conversion i take it? those are some definitely different cars and i'd gladly buy one or more of each.... the big Mercedes certainly. Quote Link to comment Share on other sites More sharing options...
Harry P. Posted February 20, 2013 Share Posted February 20, 2013 Those are some pretty cool kits. Nice to see something different for a change. Quote Link to comment Share on other sites More sharing options...
Edsel-Dan Posted February 20, 2013 Share Posted February 20, 2013 For Ordering instead of finding them in a Hobby Shop, I will need a US location., and one I can MAIL (Snail) order from. I do not have any way of electronic payment (Unemplymnet) so must send a Postal Money Order. The One friend whom I traded Christmas & birthday gifts with has stopped doing that, so I can not ask for paybay or similar Gift cards. I Do like that G4 6 wheeler!! Quote Link to comment Share on other sites More sharing options...
Harry P. Posted February 20, 2013 Share Posted February 20, 2013 For Ordering instead of finding them in a Hobby Shop, I will need a US location., and one I can MAIL (Snail) order from. I do not have any way of electronic payment (Unemplymnet) so must send a Postal Money Order. You don't have a credit card? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.