jacobus Posted March 21, 2013 Share Posted March 21, 2013 beside the 2 projects i start whit this australian coe its a resin from a&n and donor chassis wil be the freightliner fld 120 there a lot things in this conversionkit and instructions jacobus Quote Link to comment Share on other sites More sharing options...
marcay Posted March 21, 2013 Share Posted March 21, 2013 wouaouhh the kit seems complete what a big job Quote Link to comment Share on other sites More sharing options...
Jim B Posted March 21, 2013 Share Posted March 21, 2013 Nice looking kit. Quote Link to comment Share on other sites More sharing options...
Pavel A. Posted March 21, 2013 Share Posted March 21, 2013 Wau. It will be great project. Nice start. Pavel. Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted March 22, 2013 Share Posted March 22, 2013 Are you starting to build it? Should be a good one . Quote Link to comment Share on other sites More sharing options...
BigBad Posted March 22, 2013 Share Posted March 22, 2013 It's a good looking kit and it's HEAVY! I got the same one with the additional US conversion kit that adds the LH steering and dashboard, new front air inlets and side skirts. This is a build to watch! Quote Link to comment Share on other sites More sharing options...
jacobus Posted March 23, 2013 Author Share Posted March 23, 2013 chassis built and make it short on the sizes [its calcullated,] cleaning cab and first primer and test spray [mettalic blue ] l so its drying now look now for interior colours jacobus Quote Link to comment Share on other sites More sharing options...
Goldminer Posted March 24, 2013 Share Posted March 24, 2013 Hi jacobus, this is a great transkit, I have built and finished one, and started a second.... It looks to me you have made a mistake in the positioning of the front axle. With the FLD chassis, remove the 'blue' extensions and measure 36mm from front of chassis to the centre of the steer axle, (or 40mm with the supplied bumper mounts installed). Kelvin Quote Link to comment Share on other sites More sharing options...
jacobus Posted March 24, 2013 Author Share Posted March 24, 2013 thanks for the tip have already take it of after the picture was taken the size is in his instructions , but this is better to see thanks kelvin jacobus Quote Link to comment Share on other sites More sharing options...
Goldminer Posted March 24, 2013 Share Posted March 24, 2013 No problem jacobus, just trying to help. Another tip - You may notice I have assembled the steering tie-rod to the front of the axle, depending on what engine you use it may foul on the oil sump, If you intend to display with the cab tilted, no engine parts can sit more than 20mm above the top chassis rail before hitting on the cab floor. Kelvin Quote Link to comment Share on other sites More sharing options...
BigBad Posted March 24, 2013 Share Posted March 24, 2013 So Jacobus, you're making progress on this, nice! This is going to look good in that shade of blue. If I may make a suggestion for the interior, I would go with a primer grey. I'm sure it's going to be a nice looking replica.Kelvin, if you have other tips and tricks up your sleeve like you have shown for the Argosy please let us know! Thanks! Quote Link to comment Share on other sites More sharing options...
Kanedge Posted March 24, 2013 Share Posted March 24, 2013 Interesting build, haven't seen this conversion kit before. Quote Link to comment Share on other sites More sharing options...
Tony Bryan Posted March 25, 2013 Share Posted March 25, 2013 No problem jacobus, just trying to help. Another tip - You may notice I have assembled the steering tie-rod to the front of the axle, depending on what engine you use it may foul on the oil sump, If you intend to display with the cab tilted, no engine parts can sit more than 20mm above the top chassis rail before hitting on the cab floor. Kelvin Come on Kelvin post yours, it is spectacular Quote Link to comment Share on other sites More sharing options...
Goldminer Posted March 25, 2013 Share Posted March 25, 2013 (edited) Well cheers Tony.. As this is not my thread I have posted it here - http://www.modelcarsmag.com/forums/index.php?showtopic=72788 BigBad, I sent you a mesage... It will be good to see some more builds of this kit coming through! Edited March 25, 2013 by Goldminer Quote Link to comment Share on other sites More sharing options...
jacobus Posted March 25, 2013 Author Share Posted March 25, 2013 after primer and sanding his first coating of metalic blue and silver this only a mock up jacobus Quote Link to comment Share on other sites More sharing options...
Truck parts Posted March 26, 2013 Share Posted March 26, 2013 Very nice looking build. Great colors,and will be following this build as you go on. Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted April 14, 2013 Share Posted April 14, 2013 Nice start Quote Link to comment Share on other sites More sharing options...
Chad Posted April 14, 2013 Share Posted April 14, 2013 Very very cool Jacobus!!! Thanks again for the help with the fld parts! Can't wait to see this thing all together and complete. Chad Quote Link to comment Share on other sites More sharing options...
jekylljr Posted April 15, 2013 Share Posted April 15, 2013 wow nice kit, great start far Quote Link to comment Share on other sites More sharing options...
jacobus Posted April 28, 2013 Author Share Posted April 28, 2013 a little update progress gettin slow [ work,work ] so everything is not glue yet just a mock up and messure etc makin a eiffeltower for exhoust en dryfit so we go on and on to make this truck finishd he is very heavy for a model [weight] jacobus Quote Link to comment Share on other sites More sharing options...
Bennyg Posted April 28, 2013 Share Posted April 28, 2013 Nice Quote Link to comment Share on other sites More sharing options...
BigBad Posted April 29, 2013 Share Posted April 29, 2013 So, everything is going well on this build Jac? Quote Link to comment Share on other sites More sharing options...
jacobus Posted April 29, 2013 Author Share Posted April 29, 2013 yes robert its a lot of messuring for the right size etc and example,s from interior etc , but its go,s like i want to only not much time and the wheater was bad [ temp to low ] for painting must at least about 20c for a good spray and i am also waiting for some parts for the other projects and work of corse jacobus Quote Link to comment Share on other sites More sharing options...
Truck parts Posted April 30, 2013 Share Posted April 30, 2013 WoW, That's some nice up dates. Quote Link to comment Share on other sites More sharing options...
jacobus Posted May 6, 2013 Author Share Posted May 6, 2013 hello brutus almost ready on licenceplate,s and name changed exhaust and no spoilers at the rear of the cab mayby put them on i dont know yet i look for some minor points and move on to the others on the shelf and the other projects al ready waiting jacobus Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.