futurattraction Posted May 6, 2013 Share Posted May 6, 2013 Hand brake levers Slotted rotors, 10" front, 11.25" rear Pedal set BBC Trigger wheel and bracketry Lenco levers SBC Trigger wheel and bracketry Dragster accelerator pedals with alternate toe loops Hopefully I'll have some more stuff in this coming week. Quote Link to comment Share on other sites More sharing options...
Mooneyzs Posted May 6, 2013 Share Posted May 6, 2013 Scott... Nice looking pieces... I will PM you for prices. Quote Link to comment Share on other sites More sharing options...
Bonekrosha Posted May 6, 2013 Share Posted May 6, 2013 Awesome! I'll be ordering some stuff for sure. Please, Please, Please keep doing 1/16th stuff Quote Link to comment Share on other sites More sharing options...
futurattraction Posted May 6, 2013 Author Share Posted May 6, 2013 Thanks Chris. PM returned... I appreciate it, Michael. Assuming everything turns out the way I'm hoping, the order I'm waiting on will have several additional parts sets. In nickel-silver: a pair of butterfly steering wheels and assorted cockpit levers; wheelie bar housings; doorslammer levers. In brass: chassis tabs/brackets; upper strut mount gussets; front fender/clip mounting brackets; window mounting tab sets. Quote Link to comment Share on other sites More sharing options...
Elliot949 Posted May 7, 2013 Share Posted May 7, 2013 Scott are these on your website?... Quote Link to comment Share on other sites More sharing options...
futurattraction Posted May 7, 2013 Author Share Posted May 7, 2013 Yes, they are, Dan. They're in the large scale section of Products. Quote Link to comment Share on other sites More sharing options...
Prostreet Posted May 7, 2013 Share Posted May 7, 2013 Great stuff Scott, glad to see you doing big scale stuff. Quote Link to comment Share on other sites More sharing options...
futurattraction Posted May 7, 2013 Author Share Posted May 7, 2013 I've gotta have something ready for you... Quote Link to comment Share on other sites More sharing options...
Mrdarkmonkey96 Posted May 7, 2013 Share Posted May 7, 2013 Wheelie bar housing? What does that contain, I would be interested in it if it is the whole wheelie bar! Do you have anything for seat belts or buckles? Quote Link to comment Share on other sites More sharing options...
futurattraction Posted May 7, 2013 Author Share Posted May 7, 2013 The wheelie bar housing kit will include the wheels, housing that the wheels fit into and wheelie bar axle that ties the wheels together. It won't include rear end housing brackets or the tubes themselves because there are so many different configurations and lengths to choose from. I've attached a drawing of what the PE pieces will look like. Quote Link to comment Share on other sites More sharing options...
Mrdarkmonkey96 Posted May 7, 2013 Share Posted May 7, 2013 The wheelie bar housing kit will include the wheels, housing that the wheels fit into and wheelie bar axle that ties the wheels together. It won't include rear end housing brackets or the tubes themselves because there are so many different configurations and lengths to choose from. I've attached a drawing of what the PE pieces will look like. Wow! Looks like good stuff. Anything on the buckles though? Quote Link to comment Share on other sites More sharing options...
futurattraction Posted May 7, 2013 Author Share Posted May 7, 2013 Oops! Totally forgot to reply to that part of your question. Yes, I have two styles of 1/16th safety harness hardware I've got coming. I've got my fingers crossed that everything looks and fits well together. I've attached a similar pic to the other showing the two harnesses. Quote Link to comment Share on other sites More sharing options...
Mooneyzs Posted May 8, 2013 Share Posted May 8, 2013 Scott... The wheelie bar parts look awesome as well as both sets of harness's look great. Can't wait til they are made. I need to get an order placed for a few of your new parts. Quote Link to comment Share on other sites More sharing options...
Mrdarkmonkey96 Posted May 8, 2013 Share Posted May 8, 2013 Oops! Totally forgot to reply to that part of your question. Yes, I have two styles of 1/16th safety harness hardware I've got coming. I've got my fingers crossed that everything looks and fits well together. I've attached a similar pic to the other showing the two harnesses. Wow those buckles look great! I honestly would need directions though! I'm definitely going to purchas a buckles set if I can afford it! Quote Link to comment Share on other sites More sharing options...
Prostreet Posted May 8, 2013 Share Posted May 8, 2013 I've gotta have something ready for you... Hehe, I will not be starting the new 1/16th promod till winter. I do have a 1/25th project lined up though, so will be placing an order soon. Quote Link to comment Share on other sites More sharing options...
futurattraction Posted May 8, 2013 Author Share Posted May 8, 2013 Hey Chris, thanks bro. I have the wheels already. I'm waiting on the housings, which will hopefully be in yet this week. Anthony - they aren't going to be that expensive, so I hope you'll try them out... Thanks Joe. Just let me know when you're ready and I'll try to get stuff on its way to you. Quote Link to comment Share on other sites More sharing options...
Elliot949 Posted May 8, 2013 Share Posted May 8, 2013 Scott you still planning on The Heartland Nationals?... if so PM me with where you will be staying... Quote Link to comment Share on other sites More sharing options...
Harry P. Posted May 8, 2013 Share Posted May 8, 2013 You do some nice work! Quote Link to comment Share on other sites More sharing options...
futurattraction Posted May 9, 2013 Author Share Posted May 9, 2013 Dan - I am planning to go the Heartland Nats. I will let you know where we're staying. Thanks Harry! I appreciate your kind words... Quote Link to comment Share on other sites More sharing options...
Bonekrosha Posted May 9, 2013 Share Posted May 9, 2013 I didn't see the Lenco lever set in the 1/16th section. I'm gonna need a set shortly. Did I miss 'em? Quote Link to comment Share on other sites More sharing options...
futurattraction Posted May 9, 2013 Author Share Posted May 9, 2013 Michael, you didn't miss them. I only had a couple sets of them made initially because I wanted to verify that they would turn out like I wanted (and not waste money) before getting a bunch of them made. I was thinking mostly in regards to the Lenco logo etched into the upper part of the lever. Maybe I would have been wiser to have not even shown pictures of them until I had more on-hand, but I was excited to let folks know there were some new products available for 1/16th. I may end up revising the detent levers, since I'm not sure the ones I made, while accurately replicating the 1:1 pieces, may not fit the transmission as they are designed now. Quote Link to comment Share on other sites More sharing options...
Elliot949 Posted May 10, 2013 Share Posted May 10, 2013 Dan - I am planning to go the Heartland Nats. I will let you know where we're staying. Kewl... let me know... The jury is still out on if We are going... I am working on a 1:1 67 Chevy Pickup and money is getting pretty tight and I need to get the frame cut... Quote Link to comment Share on other sites More sharing options...
kitbash1 Posted May 18, 2013 Share Posted May 18, 2013 I'm looking for a couple of sets of 1/16th hood pins. Is this something that you might be doing at a later date? Quote Link to comment Share on other sites More sharing options...
MAGNUM4342 Posted May 18, 2013 Share Posted May 18, 2013 I'm looking for a couple of sets of 1/16th hood pins. Is this something that you might be doing at a later date? X2 Quote Link to comment Share on other sites More sharing options...
futurattraction Posted May 18, 2013 Author Share Posted May 18, 2013 Are you looking at something that's just a circular plate? If so, do you have 1:1 dimensions that are common to that type of plate? I'd be willing to include something the next time I draw up parts in that thickness. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.