Jump to content
Model Cars Magazine Forum

What Irked You Today?


LokisTyro

Recommended Posts

4 hours ago, espo said:

The beauty is in the eye of the beholder. I didn't make that up the saying has been around longer than I have. The saying does tell the story though. It is hard to say your true feelings about someone's work when they're asking for your opinion. While you want to offer constructive encouragement you don't want to come across like your criticizing their work. I have seen some paint work that has more orange peel than an orange, but the builder is proud of their work. What do you do ??  I guess we all have different standards as to how we think something should look or the style in which it is built. More than once I have had to bite my tongue and said nothing.      

Toms post which I agreed with wasn't about painting talent or lack of so much as about bad and just plain wrong advice.

Link to comment
Share on other sites

22 minutes ago, NYLIBUD said:

How about getting stabbed in the back by a two faced lying friend?Yea I don't go for that.No way.That is what happened to me today:angry:

Um, one of your friends doesn't appreciate gifts (returned the model you gave them), and now another stabs you in the back (or is it the same "friend")?  Seems that you might benefit from a change of friends.

Link to comment
Share on other sites

3 minutes ago, peteski said:

Um, one of your friends doesn't appreciate gifts (returned the model you gave them), and now another stabs you in the back (or is it the same "friend")?  Seems that you might benefit from a change of friends.

Yup you got it,same EX friend.Im done with him,no more.Just took him out of my fb and my phone contact.Im finished with him.I gave him a second chance,cause I feel everyone should get a second chance,but that's it.Two strikes and your out:PGone,goodbye.Adios..

Link to comment
Share on other sites

On 4/5/2019 at 12:53 PM, slusher said:

He could go to jail for that. Now if he would put it to sleep would be legal. That would bother me. I wouldn't buy anything from him. This is going to bother me now. I am a animal lover...

Yes. I agree Slusher. And the pup his friend took. Their night be problems in the future. Sounds like too much breeding going on there. 

Link to comment
Share on other sites

9 hours ago, NYLIBUD said:

How about getting stabbed in the back by a two faced lying friend?Yea I don't go for that.No way.That is what happened to me today:angry:

That sucks. If he has an issue with you. He should be upfront. You gave him a second chance. He blew it.

Link to comment
Share on other sites

21 hours ago, peteski said:

Um, one of your friends doesn't appreciate gifts (returned the model you gave them), and now another stabs you in the back (or is it the same "friend")?  Seems that you might benefit from a change of friends.

My oldest said he wanted to go to the casino but all his friends are broke.  I asked 'do you know how to fix that?'  Without missing a beat he responded "get a better bunch of friends?"  Well played my son....well played!

Link to comment
Share on other sites

On 4/5/2019 at 2:30 PM, stitchdup said:

If the authorities cant or wont do anything there's always the option to report them to those peta nutters and they can make them (in)famous

I wouldn't put those nut bags onto my worst enemy!:lol:

My daughter-in-law knows the breeder, she was a vet tech and he used the clinic she used to work at. Said as a breeder he is a class act .

She knew that he put down his own animals but did not know that he was doing that.

I checked with the locals and they said it would be my word against his (my friend said he was staying out of it) so they would not even consider going after him without more to go on.

They went on to say that they know him to be a good dog breeder and considered him above reproach.

The ones I thought would be the most appalled by it said how he puts down a suffering animal is his own business. Said it wasn't like he was being cruel or abusing the animal.

So guess that is where it stands!

Link to comment
Share on other sites

What irked me today??? The flex pipe on my 2006 HHR broke again!

Last time I bought a repair piece that was supposed to be a slip over and clamp affair only to need to be welded on.

In the end I could have bought the whole cat converter for less than what I paid in the end!

This time I ordered a new cat so it is just a bolt in. Also ordered new O2 sensors rather than fighting the old ones out, besides they were most likely bad as they were throwing codes.

Then had a tire separate so had to get a new pair for the back. Guess I know why that tire had a slow leak that no one could find.

Link to comment
Share on other sites

7 minutes ago, OldTrucker said:

What irked me today??? The flex pipe on my 2006 HHR broke again!

Cars!  Gotta love them!   I just had all of the brake hard lines and hoses replaced on my 1996 Dodge Grand Caravan.  It was at the shop a while as I had to find the hard lines, and then my garage agreed to do the work at a reduced rate when they had idle time.   I got it back two weeks ago.  I go out to take it for a spin the next day... battery dead!  Won't take a charge.  So I went and bought a new one!  And now my Hyundai has a slow leaker front tire!

Link to comment
Share on other sites

Walking around a car show today with a broken foot.For weeks my foot has been throbbing.Its getting so bad,that now it's time for a trip to the hospital for an ex-ray.Theres a million bones in your feet,I must of broken or fractured something.??.

Link to comment
Share on other sites

3 hours ago, OldTrucker said:

What irked me today??? The flex pipe on my 2006 HHR broke again!

Last time I bought a repair piece that was supposed to be a slip over and clamp affair only to need to be welded on.

In the end I could have bought the whole cat converter for less than what I paid in the end!

This time I ordered a new cat so it is just a bolt in. Also ordered new O2 sensors rather than fighting the old ones out, besides they were most likely bad as they were throwing codes.

Then had a tire separate so had to get a new pair for the back. Guess I know why that tire had a slow leak that no one could find.

I hear yah there, that's mainly whybI was thinking about selling my Jeep, too many issues that aren't going away or other to replace the ones that are. Then there is the time and weather to fix them, since we don't have a useable garage, we can't work on it in incliment weather or after dark and Mom's medical issues and caring for her that has takes up time that the weather and darkness doesn't. Sometimes it feels like I could take all 2 weeks of my vacation time when the weather will be really good so we can wrench on it and have somebody keep an eye on Mom and it still won't be enough time to fix all we need to.  At least with it being an older, somewhat desireable Jeep, it carries more resale value and even though it is rusty, is regaining value, and I can sell it for more than I could most of vehicles from '98 in the same, if not slightly better shape.

Edited by Joe Handley
Link to comment
Share on other sites

18 hours ago, OldTrucker said:

What irked me today??? The flex pipe on my 2006 HHR broke again!

Last time I bought a repair piece that was supposed to be a slip over and clamp affair only to need to be welded on.

In the end I could have bought the whole cat converter for less than what I paid in the end!

This time I ordered a new cat so it is just a bolt in. Also ordered new O2 sensors rather than fighting the old ones out, besides they were most likely bad as they were throwing codes.

Then had a tire separate so had to get a new pair for the back. Guess I know why that tire had a slow leak that no one could find.

Are your engine/trans mounts ok? Powertrain flopping around excessively can damage the flex pipe.

Link to comment
Share on other sites

For me...listening to the same dude this morning (from up the street) deciding he needs to come block and yell in to his cell phone at his girlfriend, and that she owes him money. Last night I got the "live version" - thanks buddy.

Link to comment
Share on other sites

What irked me today was my suburban or parts of it...

Was going to replace the upper balljoints on both sides as they failed inspection. i did a qiuck look at them before i ordered the parts and it looked like they had been replaced before and i thought that i had gotten lucky for once.
Factory upper balljoints are riveted in the controllarm and replacements are just attached with nuts and bolts instead of rivets.
After i got the wheel off and cleaned of the dirt i was staring at 3 rivetheads... and i dont have an grinder to remove them, neither did my neighbours.
Took and felt on the castlenut to see it it was moving anything at all before i continue and it was siezed up with rust so the only thing that moved when i used all my force was the suburban as i would have pulled it off the jackstand...

Then i tried to replace the stabilizerlink and the nut for it came off surprisingly easy but then the thrubolt that goes inside a piece of pipe that holds the flanges for the bushings was siezed so it did not move at all even when i used a sledge to "convince" it to move..
Would have needed a grinder for that to..
I only tightend the nut again and pretended that i never was there...

Then i tried to loosen one bolt for the towbar as it also failed inspection due to rust and i instantly snapped that bolt off...
So now i have given up and am planning to let a garage work on those problems and then have it inspected.
No point in me doing it without the right tools anyways..

I did manage to get my parkingcables attached to eachother again after i replaced the connector that holds them so atleast something worked out like i wanted it to.

Link to comment
Share on other sites

Ordered some aftermarket model parts that showed in stock on the 9th. Got a confirmation email on the 11th that my order had been received and would be shipped soon. Now crickets. This vendor charges exorbitant shipping, so I decided not to pay $16 for what probably will be a small padded envelope when it gets here. Gotta start buying this kind of stuff on ebay or not at all.

Link to comment
Share on other sites

  • 2 weeks later...

Don’t Know if this is the right topic for this but I’m suffering from pollen allergy which have irked me for several days now in a number of ways, hopefully it will get better in the end of May for me.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...