Jeff Johnston Posted January 11, 2015 Share Posted January 11, 2015 (edited) Well its been 2 and a half years since I sold my 69 Mustang so I think its time to build a scale version. Next maybe I will build a scale version of my current 2006. My car was like that really cute girl you knew in high school. Looked great on the outside. Very sexy and clean. Underneath, well she was not quite as put together... Mine had a 302 so I am going to be using the 289 out of the AMT 67 kit as it looks way more like a 302 than the 428 that comes in the 69 kit.I am going to take my time because there are many bits and pieces needed to make this like mine. Sometimes I tend to rush through some details and I'm trying not to do that on this build.Here is where I am. Pretty far but I keep forget in to take pics alone the way. Snapped most of these today. This is the trunk. When I do trunks I usually carve the detail out of sheet styrene, and glue it tothe trunk underside. It's painstaking, and sometimes the shapes are not exactly symmetrical. I decided to try something different by creating the shapes. Its a reverse of what I usually do. Well...It will look ok but I have cince decided I like the other way better. Here is the Mustang. This is the "other way". I think I like this better. This is from a 66 Mustang I did a couple years back. Too late now haha. I don't think one will be that much more noticeable on the built model, but no more experiments HAHA Sure would like some opinions on this one. Let me know what you think is more authentic looking. Edited January 11, 2015 by Jeff Johnston Quote Link to comment Share on other sites More sharing options...
Jeff Johnston Posted January 11, 2015 Author Share Posted January 11, 2015 Filled in where the roll bar goes. That is left over from the Shelby kit. Actually the whole interior is from the Shelby and many parts not correct for a Mach 1 or standard fastback.See on the drivers side rear where I cut it out and filled that in. I've done the other side now too. Also the middle arm rest in a standard mustanf is flat. no pleats kike that. I filled those gaps in with some spot bondo and sanded it smooth. Quote Link to comment Share on other sites More sharing options...
Jeff Johnston Posted January 11, 2015 Author Share Posted January 11, 2015 Here are my door panels. Those gaps that you see will be filled in with super glue and some super glue and accelerator. I'll sand it smooth and there will be no more gaps (I guess thatch why they call it gap filling glue haha). Here is the other side done. Quote Link to comment Share on other sites More sharing options...
Jeff Johnston Posted January 11, 2015 Author Share Posted January 11, 2015 My car did not have the fold down searts to I put a package tray like was in my car. Also have the detail for the trunk. Quote Link to comment Share on other sites More sharing options...
Jeff Johnston Posted January 11, 2015 Author Share Posted January 11, 2015 (edited) The Mach 1 kit has the shaker hood. My car had the standard Mustang non functional hood scoop. I'm not sure if this was factory with the car or if someone added it along the way. It had it on the car when I got it. I sanded the opening and filled it in with styrene. My 1:1 car actually had a plate covering the opening so I am pretty sure it came on the car. and the real car Edited January 11, 2015 by Jeff Johnston Quote Link to comment Share on other sites More sharing options...
Jeff Johnston Posted January 11, 2015 Author Share Posted January 11, 2015 This is where I am at this point. From here I will start to prime and paint the body, and also start working on the chassis and engine. Quote Link to comment Share on other sites More sharing options...
mrmike Posted January 11, 2015 Share Posted January 11, 2015 Looking good Jeff! Where did you get the hood scoop? I have the same kit and I would like to have one for mine. I'll be watching... Quote Link to comment Share on other sites More sharing options...
Jeff Johnston Posted January 11, 2015 Author Share Posted January 11, 2015 The hood scoop is from the Revell 1970 Mach 1 kit. Quote Link to comment Share on other sites More sharing options...
cobraman Posted January 11, 2015 Share Posted January 11, 2015 Looks to me like you are doing some fine work. Quote Link to comment Share on other sites More sharing options...
Guest Posted January 11, 2015 Share Posted January 11, 2015 Nice start Jeff! Are you going to correct the front end? I started one a few years ago and got the front end corrected. But, that was about as far as I got. Quote Link to comment Share on other sites More sharing options...
espo Posted January 11, 2015 Share Posted January 11, 2015 Great looking work. I like how you worked the supports for the trunk and doors. Quote Link to comment Share on other sites More sharing options...
MonoPed Posted January 11, 2015 Share Posted January 11, 2015 Jeff, One of my friends has a 70 Mach 1 with the non functional scoop. It's just a standard hood with the scoop bolted on, and looks just like your old car's hood underneath. Shaker hoods are the same stampings, with the hole cut out (as well as the twist lock holes) and a trim piece added to cover the edges of the cut. His car is a late 1969 build date as well. Your build is looking great, especially opening everything up! Quote Link to comment Share on other sites More sharing options...
IceMan Collections Posted January 11, 2015 Share Posted January 11, 2015 That's looking great, Jeff. All the little details will pay off in the end. Quote Link to comment Share on other sites More sharing options...
slusher Posted January 12, 2015 Share Posted January 12, 2015 Great work and project... Quote Link to comment Share on other sites More sharing options...
dino246gt Posted January 12, 2015 Share Posted January 12, 2015 Very nice work so far, keep it going! And show us the pictures, cool! Quote Link to comment Share on other sites More sharing options...
Kornnut Posted January 12, 2015 Share Posted January 12, 2015 Looking real good. I want to build a copy of my 02 gt. Quote Link to comment Share on other sites More sharing options...
Revstew Posted January 12, 2015 Share Posted January 12, 2015 Your door jambs and detail are inspirational to say the least!! great looking build Quote Link to comment Share on other sites More sharing options...
vamach1 Posted January 12, 2015 Share Posted January 12, 2015 Off to a great start. Don't forget the spare tire. Quote Link to comment Share on other sites More sharing options...
impcon Posted January 12, 2015 Share Posted January 12, 2015 This should turn out to be a very nice model! I am working on a '69 Camaro and I opened the trunk and built the trunk floor base don pictures on line. I want to do the under lid detailing like you did on your Mustang - the '66 version definitely looks better. How did you go about making the "stampings" on the underside of the deck lid? That is, could you maybe back up a bit and explain your process for making the patters and what thickness of styrene did you use? Did you base the design on the real 1"1 Mustang? What you did there looks truly fantastic! My Camaro will be a gift for a friend who has a 1:1 and I want it as nice and detailed as my meager building abilities go. I - and probably many others, would appreciate a tutorial on your process if you feel up to sharing your expertise. Thank you for posting. Quote Link to comment Share on other sites More sharing options...
Jim3 Posted January 12, 2015 Share Posted January 12, 2015 Off to a good start... Quote Link to comment Share on other sites More sharing options...
DanielG Posted January 12, 2015 Share Posted January 12, 2015 Looking good so far! Quote Link to comment Share on other sites More sharing options...
Jeff Johnston Posted January 18, 2015 Author Share Posted January 18, 2015 How did you go about making the "stampings" on the underside of the deck lid? I print out a photo on line of the trunk and I shrink it so that its pretty much the size of the trunk in scale. Then I basically use that to draw half the shape onto a piece of white paper, and I use a #11 blade to cut the shapes out. Then I fold this in half so I can exactly replicate the shape on the other side. Hard to explain but maybe I'll do a tutorial on it. Once I have that paper with the skeleton cut out. I trace that onto sheet styrene, then I carefully cut it out with a blade. Quote Link to comment Share on other sites More sharing options...
Jeff Johnston Posted January 18, 2015 Author Share Posted January 18, 2015 My car was a real looker on the outside and in the interior, but was well driven on the underside. This is my start to the chassis and engine. Quote Link to comment Share on other sites More sharing options...
Jeff Johnston Posted January 25, 2015 Author Share Posted January 25, 2015 (edited) Some more work last night. i tried to fabricate exhaust like I had on mine which were just pipes and a muffler (dual) but after several tries it wasn't coming out like I wanted. It just looked like styrene tubing with a couple mufflers on it. So I used the 67 Mustang exhaust and called it good enough. I say 67 because I used the 289 out of the 67 kit as the engine. Its a lot closer to the 302 that I had in mine than is the 428 that comes in the kit. Edited January 25, 2015 by Jeff Johnston Quote Link to comment Share on other sites More sharing options...
lambrakos Posted January 25, 2015 Share Posted January 25, 2015 I strongly suggest that you use a mirrored base display to show all your hard and awsome work. I am a believer of "just off the line" look, but this is out of the ordinary so far. Keep up the good work and lets see it finished. From a mustang lover! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.