Don Sikora II Posted March 31, 2021 Share Posted March 31, 2021 On 2/28/2021 at 9:02 PM, Casey said: I may have asked about a few of these previously, but maybe not. Four dashboards first: 1/24 Monogram '69 GTO The Judge? ? MPC '69 Plymouth Barracuda? MPC '70-'78Β Pontiac Firebird?Β Β Three center consoles: ? JO-HAN AMC '64 & '65Β Rambler AMT '6? Impala??? Second dash might be MPC Vega. The consoles: #2 is Jo-Han 1964, 1965, Β and 1966 Rambler Americans. It was also in the USA Oldies reissue of the '66 Marlin. Beautiful engraving on this part.Β #3, the 4-speed unit, is from the Jo-Han '66 Marlin annual kit.Β #1 looks familiar, but I'm not sure. I'd check the xXx version of the MPC/AMT '67 GTO kit. It had a different topper for the console base that's molded into the floor, and memory says the shifter location was offset like that. There's at least one reissue from those crazy RC2 days that has the "regular" version build ofΒ the '67 GTOΒ on the box but the xXx parts inside. Quote Link to comment Share on other sites More sharing options...
Don Sikora II Posted March 31, 2021 Share Posted March 31, 2021 On 3/4/2021 at 12:28 PM, Casey said: Anybody recognize this two-piece transaxle(?)? Appears to be 1/25 scale, for a smaller car, but I am fairly confident I have ruled out the MPC Pontiac Fiero 4-cylinder, AMT VW Scirocco, MPC Dodge Daytona, and MPC Chevy Cavalier kits...maybe Revell Ford Escort? Hmmm. It "looks" AMT or MPC to me. I can rule out MPC Dodge Omni O24/etcΒ and Ford EXP, along with AMT Plymouth Horizon TC3. Have a built Revell Ford EXP, and it should be the same as the Revell Escort. That one appears to be very different than this. Can also rule out Revell VW Golf GTI Mk2 and 1990 Pontiac Grand Prix. Monogram '85 Fiero GT might be a possibility. Color seems wrong, but did you look at a MPC/AMT Chevy Beretta? Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted April 27, 2021 Share Posted April 27, 2021 Can anyone ID this clear shot? Two views of same part. Has number 009-0696. Or if itβs upside down 9690-600. I found it in a Hemi Under Glass parts box and itβs obviously not from that kit! Thanks! Quote Link to comment Share on other sites More sharing options...
Mark Posted April 27, 2021 Share Posted April 27, 2021 The clear parts are from an AMT '71 Duster. Quote Link to comment Share on other sites More sharing options...
VW93 Posted July 21, 2021 Share Posted July 21, 2021 AMT dual axle trailer from the Cal Drag Combo question. Can anyone ID these parts that are on this tree for the trailer? They are not shown in the instructions. Quote Link to comment Share on other sites More sharing options...
Mark Posted July 21, 2021 Share Posted July 21, 2021 Those parts are mounting brackets for side boards that are no longer in the kit.Β The side boards were only in the 1960 and 1961 Chevy pickup kits, and the mail-order version that was sold in the early Sixties.Β When the trailer was updated for use in the drag team sets a few years later, the side boards were deleted. Quote Link to comment Share on other sites More sharing options...
VW93 Posted July 21, 2021 Share Posted July 21, 2021 28 minutes ago, Mark said: Those parts are mounting brackets for side boards that are no longer in the kit.Β The side boards were only in the 1960 and 1961 Chevy pickup kits, and the mail-order version that was sold in the early Sixties.Β When the trailer was updated for use in the drag team sets a few years later, the side boards were deleted. Thanks Mark, I didn't think to look at instructions from the early 60's. Quote Link to comment Share on other sites More sharing options...
Casey Posted November 27, 2021 Author Share Posted November 27, 2021 I could use some help identifying this peaked hot rod style fender. Pretty sure it's 1/25 or 1/24 scale, and the plastic looks '60s era white (looks creamier in the pics) to me. Quote Link to comment Share on other sites More sharing options...
Mark Posted November 27, 2021 Share Posted November 27, 2021 That fender looks like the ones in the Monogram first issue Model AΒ Ford kits.Β Β Quote Link to comment Share on other sites More sharing options...
Mark Posted November 27, 2021 Share Posted November 27, 2021 It does also resemble the rear fenders in early issue AMT '25 Fords.Β But all of the Sixties issues I'm aware of were molded in black plastic.Β I'd still lean towards Monogram, especially if the diameter of that fender is really big.Β The AMT fenders don't fit over their slicks, if I remember right. Quote Link to comment Share on other sites More sharing options...
Casey Posted November 27, 2021 Author Share Posted November 27, 2021 I think I found the source-- AMT 1925 T. Screenshot from hpiguy/Chris' video: Β Quote Link to comment Share on other sites More sharing options...
Casey Posted December 14, 2021 Author Share Posted December 14, 2021 (edited) MPC '67-'68 Cougar F/C front bumper/grille?: Β AMT GMC pickuo or Jimmy front bumper/grille? Promo style mounting tabs on backside are broken off/gone: Edited December 14, 2021 by Casey Quote Link to comment Share on other sites More sharing options...
Mark Posted December 14, 2021 Share Posted December 14, 2021 The Cougar bumper/grille does look like MPC. The GMC bumper/grille is from an AMT pickup.Β The Jimmy has two separate parts, plus clear headlamp lenses. Quote Link to comment Share on other sites More sharing options...
Casey Posted December 14, 2021 Author Share Posted December 14, 2021 Thanks, Mark. Quote Link to comment Share on other sites More sharing options...
Casey Posted December 28, 2021 Author Share Posted December 28, 2021 Can anyone identify the source of this transparent red tail light lens? O.D. measures .290", and it's about .075" thick. There is a small lip around the outer edge, and the concentric rings on the lens' face are slightly raised.Β Aqua AMT wheel for size comparison: Β Quote Link to comment Share on other sites More sharing options...
Mark Posted December 29, 2021 Share Posted December 29, 2021 I'm thinking that taillight lens is from one of AMT's early Sixties T-Bird kits, probably one that had Stylizing parts in it.Β I've never had a complete kit (I've concentrated on stock versions of those) so I don't have any of the instruction sheets to verify this. Quote Link to comment Share on other sites More sharing options...
Don Sikora II Posted December 29, 2021 Share Posted December 29, 2021 I'm relatively sureΒ it's from theΒ Revell pro-street C4 Corvette kit #7457.Β I get about .285 for the OD on my mint parts, so it's probably the same.Β The Monogram '86/'87 C4 Corvette convertible might have used a similar taillight as well, but my kit isn't handy to look at.Β Quote Link to comment Share on other sites More sharing options...
Casey Posted December 29, 2021 Author Share Posted December 29, 2021 25 minutes ago, Don Sikora II said: The Monogram '86/'87 C4 Corvette convertible might have used a similar taillight as well, but my kit isn't handy to look at.Β That's them. Thank you, Don. 1 Quote Link to comment Share on other sites More sharing options...
Casey Posted December 29, 2021 Author Share Posted December 29, 2021 58 minutes ago, Mark said: I'm thinking that taillight lens is from one of AMT's early Sixties T-Bird kits, probably one that had Stylizing parts in it.Β I've never had a complete kit (I've concentrated on stock versions of those) so I don't have any of the instruction sheets to verify this. Thanks. I was thinking '62-'64-ish, but all of the AMT kit tail lights I looked at on instruction sheets that were round seemed to be cone shaped, or at least peaked on some form. Quote Link to comment Share on other sites More sharing options...
hedotwo Posted December 29, 2021 Share Posted December 29, 2021 Anyone recognize this chassis?Β I know the wheel covers are 67 Galaxie but the chassis isn't. Quote Link to comment Share on other sites More sharing options...
bisc63 Posted December 29, 2021 Share Posted December 29, 2021 (edited) Possibly early 60s Pontiac, Bonneville or Catalina. Here's a '63 from the web that is VERY close, differing in minor engraving details, so could even be AMT vs, MPC or some such. Definitely has the Poncho style frame rails, making 90 degree-ish turns abruptly at each end of the rocker panels, where most other GM frames curve more gently. Edited December 29, 2021 by bisc63 add info Quote Link to comment Share on other sites More sharing options...
hedotwo Posted December 29, 2021 Share Posted December 29, 2021 1 hour ago, bisc63 said: Possibly early 60s Pontiac, Bonneville or Catalina. Here's a '63 from the web that is VERY close, differing in minor engraving details, so could even be AMT vs, MPC or some such. Definitely has the Poncho style frame rails, making 90 degree-ish turns abruptly at each end of the rocker panels, where most other GM frames curve more gently. You're right it sure does look like a GM chassis.Β Not sure what it was doing under my 67 Galaxie, although it fitΒ π Thanks Rusty Quote Link to comment Share on other sites More sharing options...
Oldcarfan27 Posted December 30, 2021 Share Posted December 30, 2021 On 12/29/2021 at 8:31 AM, hedotwo said: You're right it sure does look like a GM chassis.Β Not sure what it was doing under my 67 Galaxie, although it fitΒ π Thanks Rusty Well, since the Galaxie isn't complete and obviously has the wrong parts you might as well dump it. Just send it to me, I'll pay the postage! ππ Quote Link to comment Share on other sites More sharing options...
hedotwo Posted December 31, 2021 Share Posted December 31, 2021 5 hours ago, Oldcarfan27 said: Well, since the Galaxie isn't complete and obviously has the wrong parts you might as well dump it. Just send it to me, I'll pay the postage! ππ π Quote Link to comment Share on other sites More sharing options...
Casey Posted January 25, 2022 Author Share Posted January 25, 2022 (edited) Fourth wheel from the left, molded in red is from...*1/24 Monogram '87 Ford Thunderbird Turbo Coupe. Thanks Mark.* Edited January 25, 2022 by Casey Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.