Jump to content
Model Cars Magazine Forum

Recommended Posts

Posted

Hi guys, im thinking of attempting my first 2 tone job, is there any advice someone could offer? Am i crazy? What should i expect? Any and all advice is greatly appreciated, Btw I really love and appreciate this place!, Dave

Posted

Mask it as well as you can - overspray will go where you didn't think possible.

Don't cheap out on tape. Use the best you can get. I like 3M Fineline for the paint edge, but there are likely others just as good if not better.

#1 Rule... if it ain't sanded, don't paint it. Masking tape will easily peel off paint that is sitting on un-sanded parts.

Try to keep you coats as thin as possible to avoid build-up on the tape edge.

Lighter colours first.

Put the first colour on before you mask off for the second colour, letting the overspray go where the second colour will go. When that first colour is dry, then mask and sand for the second colour. Keeps that paint edge from becoming a big ridge.

Lots of other things. I'm sure other will chime in.

Posted

I just did a two-tone paint job last week. I use 3-M tan masking tape, which as been around for years. After spraying the lighter color and masking, I shoot clear along the tape edge so if there's any bleed through it will be...........................BINGO! Clear. Then I spray my darker color and remove the tape in an hour or two. Piece of cake.

Posted

Good advice from both Mike and Nick, the only thing I would add is don't be afraid of it, the worst that can happen is you screw it up. If you do, strip it and try again, every successful two tone I've done has a bunch of failures behind, it's how you learn!

Posted

Thanks for all the helpful tips restoman, highoctane, and custommike. I will take those on board and have a practise on and old shell, cheers!

Posted

D-man,take a piece of scrap,as flat as possible sand it,wash in warm soapy water rinse w hot clear water,let er air dry,,mask awayMAKE SURE TO CLEAN,YOUR DIRTY HANDS! AND PRESS THAT TAPE DOWN TIGHT!wipe,w clean rag,and paint accordingly congradulations! Shaun

Posted (edited)

I do many multi color paint jobs with out any bleed through, i always run my thumb nail across the tape edge, just to make sure it has stuck as best as possible.

Just go for it mate, nothing like practice, it's only paint, if you stuff it up, rub it back and go again.

But i agree with the others, GOOD quality tape, and low tack if you can get it.

Edited by DeeCee

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...