Fireball Modelworks!

[Southern Fried]

Just received my Fireball Modelworks tires, and white letter decals.

WOW!  The mainstream manufacturers have never put out a tire that "looked" the right width and diameter that I have in the pics of my 1/1 cars.

Joseph has NAILED it!

Ordered the Mickey Thompson N-50's in both 1/24 and 1/25 to compare. Lined them up on a '67 Impala (had one) and a '61 Impala (had three of these, 1/1) and they are perfect! Capture that '70's/'80's look just right.

Be ordering 4 more sets next week. Will experiment with shaving the raised M/T letters off, and applying Fireballs white letter decals to reflect the tires I had (Cooper Cobra, etc)

If you haven't tried these out...you are missing out.

 

[bismarck]

I LOVE they're stuff!! I need a second job to buy all the stuff i want from his site. I've ordered krawler tires from him, and they are TOP SHELF!!!

[modelercarl]

I just got (6) Goodyear Wrangler MT/R tires from him for a MENG F350 I am building with Scenes Unlimited dually fenders.  I am astonished at the quality, never seen model tires so authentic.  The order was here 3 days after placed with him.  Planning on more purchases.

[Ben]

Everything Joseph makes is incredible!!!!!

[RAT-T]

JUST GOT 4 SETS OF DOOR HANDLES, 2 Q-JET CARBS & THE NEW SET OF PONTIAC POVERTY WHEELS, CAPS & TIRES, SOME OF THE CLEANEST PARTS I'VE SEEN.

GREAT STUFF JOE, THANKS AGAIN

[peteski]

Yes, Joseph is a class act.  Very good products, and Joseph is a pleasure to deal with.

[Rob Hall]

Got my first order from Fireball today, very pleased w/ the quality and experience.   

[Mr mopar]

Just got the 69' Barracuda hood scoops ...... At first they look to small but when put on the hood they are the right size.

look Awesome ! Thank you Joseph nice castings.

[Sport Suburban]

Just got the 69' Barracuda hood scoops ...... At first they look to small but when put on the hood they are the right size.

look Awesome ! Thank you Joseph nice castings.

I was wondering about that. I have some of the old AFX-N-Scale cast ones and they are to big.

[Mr mopar]

I was wondering about that. I have some of the old AFX-N-Scale cast ones and they are to big.

Raoul you will like them ,they are the right size!

Edited July 25, 2016 by Mr mopar

[DoctorLarry]

I ordered some BOP Quadrajets.  Great detail and they will look great when installed.  Very nice products.

[BobbyG]

Joseph's choice of products, quality and his service are outstanding and never disappointed. He responds very quickly when you send an order or email him with questions. I look forward all the time for the next product...just waiting on those Carter AFBs. The QuadraJets are superb and look so right!

 

[RAT-T]

Joseph's choice of products, quality and his service are outstanding and never disappointed. He responds very quickly when you send an order or email him with questions. I look forward all the time for the next product...just waiting on those Carter AFBs. The QuadraJets are superb and look so right!

 

WITH HIS GREAT DETAIL, SOME HOLLEY'S WOULD BE NICE TOO

[gasser59]

His decal printing on his Alps is also top notch. Send him a vector based file on his template and you'll be amazed.

[blackbeard]

do anyone know if he carry's pro touring rear tires in 1/16

[Modelbuilder Mark]

Just checked out their page, they have some great stuff.

[Sport Suburban]

Raoul you will like them ,they are the right size!

I went ahead and ordered the 69 Barracuda scoops along with the 69 Coronet side scoops and 1/25 General Lee wheels and tires. This is nice stuff! The 69 Barracuda scoops are way smaller and almost look too small but they fit over the Keith Marks decals and look great on the hood during a quick mock up! Thanks again!!

Edited July 29, 2016 by Sport Suburban

[Mr mopar]

NP Raoul  !

[Chief Joseph]

Thanks very much for all your support, guys!

I have the 1/25 Street Hemi Carter AFB carbs available now.  Each set includes two complete pairs (2 front and 2 rear carbs).  Item number FMR-082.

Shown here attached to the intake of the Revell '70 Hemi Cuda.

 

[MrObsessive]

Thanks very much for all your support, guys!

I have the 1/25 Street Hemi Carter AFB carbs available now.  Each set includes two complete pairs (2 front and 2 rear carbs).  Item number FMR-082.

Shown here attached to the intake of the Revell '70 Hemi Cuda.

 

Now THAT is some nice detail on those carbs!!

[Yahshu]

Thanks very much for all your support, guys!

I have the 1/25 Street Hemi Carter AFB carbs available now.  Each set includes two complete pairs (2 front and 2 rear carbs).  Item number FMR-082.

Shown here attached to the intake of the Revell '70 Hemi Cuda.

 

They have to be the most detailed carbs I've ever seen, very cool.

Are you able to do the indicator lens that belong in the grill of the S & H Torino? If you could do them to suit the MCG photoetch set that would be awesome

[gtx6970]

How about some non hemi avs carbs?

[Chief Joseph]

How about some non hemi avs carbs?

I've done an AVS, actually!  It's not really a very popular carburetor, so I haven't been moving very fast on it.  I'd like to get my hands on a Thermoquad since it's a bit more popular.

This is my AVS 3D model:

[charlie8575]

Have you considered doing a Carter BBD, I think it's called? The 2-bbl. Chrysler used on a lot of small-blocks. It'll make making 340s into 318s a lot easier.

Charlie Larkin

[Mr mopar]

Have you considered doing a Carter BBD, I think it's called? The 2-bbl. Chrysler used on a lot of small-blocks. It'll make making 340s into 318s a lot easier.

Charlie Larkin

I think you mean AVS , it was used on 340's