aurfalien Posted July 30, 2016 Posted July 30, 2016 (edited) Hi, Paint cans always have a tendency to pop and bulge on me. I no longer shake Tamiya cans but swirl them. However my conventional cans pop and bulge significantly. Here is a pic of a fresh can in its first use; Rustoleum Painters Touch Ultra Cover. All I did is shake it for 1 minute. Am I crazy? Shall I swirl everything from now on? Edited July 30, 2016 by aurfalien
SfanGoch Posted July 30, 2016 Posted July 30, 2016 Where do you store them and how warm is it in that location? If this happens to all of your aerosol cans, it's way too hot.
aurfalien Posted July 30, 2016 Author Posted July 30, 2016 Where do you store them and how warm is it in that location? If this happens to all of your aerosol cans, it's way too hot.They are in my room which is not that warm.I'm on the coast.The cans don't display bulges until I shake em. Do you feel they are too warm to begin with?Perhaps running under cold water before swirling/shaking would help?
StevenGuthmiller Posted July 30, 2016 Posted July 30, 2016 I've never, ever had a can bulge on me like that.I don't think shaking has anything to do with it.It has to be something with storage conditions.Temperature or possibly altitude? Steve
Mike_G Posted July 30, 2016 Posted July 30, 2016 Are you perhaps shaking it so hard that the ball inside is making those dents? I've never seen anything like that
aurfalien Posted July 30, 2016 Author Posted July 30, 2016 I've never, ever had a can bulge on me like that. I don't think shaking has anything to do with it. It has to be something with storage conditions. Temperature or possibly altitude? Steve Welp, I've no AC and it can get 90 degress in my room. I'd say I'm about 1,000 feet above sea level. This is my view;
Ace-Garageguy Posted July 30, 2016 Posted July 30, 2016 I'd say I'm about 1,000 feet above sea level. This is my view; Hmmmmm.... That view looks to me like it would put you pretty much AT sea level. And I think you need to get in touch with these guys...
astroracer Posted July 30, 2016 Posted July 30, 2016 I usually soak the rattle cans in hot water before spraying, well above 90 degrees... believe me, and I have never seen or had that happen... And shaking should have nothing to do with it... Don't know what to say here except get an airbrush. ?Mark
aurfalien Posted July 30, 2016 Author Posted July 30, 2016 (edited) I usually soak the rattle cans in hot water before spraying, well above 90 degrees... believe me, and I have never seen or had that happen... And shaking should have nothing to do with it... Don't know what to say here except get an airbrush. ?MarkI'll swirl the cans as per Tamiyas site.I also emailed Rustoleum and will simply exchange the can at Home Depot from where I bought it.In my case, I may even run em under cool water before spraying.I do have an air brush but like rattle cans as well. I really enjoy having many tools for the job. Edited July 30, 2016 by aurfalien
espo Posted July 30, 2016 Posted July 30, 2016 It has to do with heat. Somehow the spray cans are getting very warm. Do they sit in the sun inside your room ? The only time I have seen that is when I left the spray can in the hot water to long. That sound will not be forgotten any time soon.
aurfalien Posted July 30, 2016 Author Posted July 30, 2016 It has to do with heat. Somehow the spray cans are getting very warm. Do they sit in the sun inside your room ? The only time I have seen that is when I left the spray can in the hot water to long. That sound will not be forgotten any time soon. Well, I'm not sure. I do have window coverings so the light is diffused for sure.I'm confident the cold water run will help future endeavors.
StevenGuthmiller Posted July 30, 2016 Posted July 30, 2016 This shouldn't happen @ 90 degrees.I heat my cans before painting too & I've never seen this happen.warming the cans definitely helps the paint lay down better.If you plan on cooling them, expect the paint to not perform as well.If I had to guess, I would say you've just had an "unlucky" streak of bad cans.I've had spray paint cans sit in my garage for years where the temperature can exceed 120 degrees in the summer & fall to 30 degrees below zero in the winter, & I've never had one pop like that. Steve
Ace-Garageguy Posted July 30, 2016 Posted July 30, 2016 (edited) Wow...you know...like...maybe it's...like...not too high pressure in...like, the cans, but like...the air pressure is...like...really low where you live... Edited July 30, 2016 by Ace-Garageguy
aurfalien Posted July 30, 2016 Author Posted July 30, 2016 (edited) Wow...you know...like...maybe it's...like...not too high pressure in...like, the cans, but like...the air pressure is...like...really low where you live... Hmmmm, perhaps, not a bad idea. Currently 29.87 inHg and falling. Looking up whats considered low, I fall into that category. How does one combat low air pressure? BTW, nice Cali accent, circa 80's that is Edited July 30, 2016 by aurfalien
Ace-Garageguy Posted July 30, 2016 Posted July 30, 2016 You could always try painting inside an iron lung.
aurfalien Posted July 30, 2016 Author Posted July 30, 2016 You could always try painting inside an iron lung. Brilliant! Practical, compact, portable, cheap. I love it!!!
Xingu Posted July 30, 2016 Posted July 30, 2016 Wow...you know...like...maybe it's...like...not too high pressure in...like, the cans, but like...the air pressure is...like...really low where you live... I appreciated this one.....for sure.
aurfalien Posted July 30, 2016 Author Posted July 30, 2016 (edited) According to my new iPhone combo app which is killer, my current pressure (based on GPS) is 29.488 inHg while sea level pressure is 29.794 inHg.And I am at exactly 285.11 feet. Edited July 30, 2016 by aurfalien
StevenGuthmiller Posted July 30, 2016 Posted July 30, 2016 According to my new iPhone combo app which is killer, my current pressure (based on GPS) is 29.488 inHg while sea level pressure is 29.794 inHg. And I am at exactly 285.11 feet. Now if you could find an app to tell you why your cans are blowing up.......... Steve
aurfalien Posted July 30, 2016 Author Posted July 30, 2016 I'm pretty sure its my low air pressure and have an email to both Tamiya and Rustoleum to confirm.Swirling the cans keeps the bulging down and I think Monsignor Ace was brilliant in pointing out my local barometric pressure as being the culprit.
Ace-Garageguy Posted July 31, 2016 Posted July 31, 2016 I appreciated this one.....for sure. Glad somebody got it.
Yenkocamaro Posted July 31, 2016 Posted July 31, 2016 I'm pretty sure its my low air pressure and have an email to both Tamiya and Rustoleum to confirm. Swirling the cans keeps the bulging down and I think Monsignor Ace was brilliant in pointing out my local barometric pressure as being the culprit. I know you are kidding....right? The only outer influence on a sealed spray paint can, is hot or cold. The propellant inside of your can, swelled it because the pressure inside increased beyond the can's normal temp range, too hot. Cheers, Lance
aurfalien Posted July 31, 2016 Author Posted July 31, 2016 (edited) I know you are kidding....right? The only outer influence on a sealed spray paint can, is hot or cold. The propellant inside of your can, swelled it because the pressure inside increased beyond the can's normal temp range, too hot. Cheers, Lance Well, how could it have been hot since I'm on the coast and not in direct sun light. Tellin ya, my room is max 90 which is an exception rather then a rule. What else explains it? New can of Testors Metalizer. I was shaking but now I swirl which keeps the bugles down. I never use hot water etc... Most of my cans of Tamiya eventually do this. I live in Malibu. Edited July 31, 2016 by aurfalien
Ace-Garageguy Posted July 31, 2016 Posted July 31, 2016 (edited) You're cursed. Consider an exorcism. Yup. Day be debils in de spray cans. OR...you have previously unsuspected psychokinetic powers. Your mind is inadvertently pulsing energy into the mixing ball in the cans, much more energy than is normally imparted through shaking, causing them to make the outie-dents we're seeing in the photo. At one point, the Id-monster in the 1956 film Forbidden Planet portrays something disturbingly similar to this phenomenon. Of course, when it's used for good, as channeled by the Yoda character in Star Wars, it's a whole nother kettle of fish. ... Edited July 31, 2016 by Ace-Garageguy
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now