J-Feuerhammer Posted February 3, 2017 Posted February 3, 2017 (edited) Hi all. I'm starting a semi buijld of a California Hauler 359 Peterbilt. I was wondering if anyone has done if of these before and customized it. What I'm trying to accomplish is to stretch the frame and maybe some other mods. I was wondering what to use for the stretch to glue in and what to use for the drive shaft. Also the plate on the top to cover the stretched part. If anyone has done one of these before or has a video or pics I would greatly appreciate the advise and help on how and what to use for this project. Edited February 3, 2017 by J-Feuerhammer
signguy2108 Posted February 3, 2017 Posted February 3, 2017 (edited) Hi Jesse, u can scroll down to the model truck section where you will find all the knowledge & inspiration you will need.If it has to do with a truck, someone here has done it ! Edited February 3, 2017 by signguy2108 spelling
1st 700 Quad Posted February 3, 2017 Posted February 3, 2017 For the drive shaft take the kit driveshaft and get a piece of either brass or aluminum tubing that it slides into. Cut the kit part in half and slide an end into each end of the tubing. Measure how long the shaft needs to be and cut the tubing so that the entire length if your part is what you need. This will include some of the kit part sticking out of either end of the tubing. glue the ends in the tubing and you have your drive shaft.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now