OK Crap'n I did come calculating

[Guest Gramps-xrds]

If my calculations are right That building is 68x40 (32.640x19.200 in.)and 20 ft tall and 16 ft on the shorter side. The far garage door is 9x12 and the other 2 are 10x10s. This should give you a good start to see what you'll need.

[CB]

If my calculations are right That building is 68x40 (32.640x19.200 in.)and 20 ft tall and 16 ft on the shorter side. The far garage door is 9x12 and the other 2 are 10x10s. This should give you a good start to see what you'll need.

Wow Gramps! Thanks, I was just gonna sit down and do some figurin my ownself. I printed up a couple of the pics I took and then I realized I tore apart my drafting divider so's I could use it as a scribing tool on the rat! Doggone it! I was gonna check to see the figures you gave me on the man door and here you done gone ahead an figgered the garage doors too. I'm just gonna go with your figures and see how it looks. Thanx again buddy!

[Guest Gramps-xrds]

Those measurements should work just fine. I thought I'd save you some headaches . Another thing you might watch is the tops of windows are usually set at the same height as the door jambs, but not always.some are a bit lower.

Edited June 15, 2008 by Gramps-xrds