Acarnut2 Posted February 8, 2009 Share Posted February 8, 2009 At this point I cut out the doors terribly, but I am sure adjustments can be made. Quote Link to comment Share on other sites More sharing options...
Acarnut2 Posted February 8, 2009 Author Share Posted February 8, 2009 At this point I cut out the doors terribly, but I am sure adjustments can be made. The door skins are from an 06' Camaro. The Maisto door skins that came with the chassis are too small. I used the dash board as well. Quote Link to comment Share on other sites More sharing options...
Acarnut2 Posted February 8, 2009 Author Share Posted February 8, 2009 The Corvette engine is just a vacuum formed sheet of clear styrene incorporated with the windshield that has been trimmed for the wipers and ventalation cowl.Body with the hood placed but not yet to fit. i trimmed the nose to the hood to allow it to open freely but it left a large gap so I had to add a piece of styrene to close the space that was left. Quote Link to comment Share on other sites More sharing options...
Acarnut2 Posted February 8, 2009 Author Share Posted February 8, 2009 The model as of now. If you have any suggestions or comments please do.....it will help....whether negative or positive, I am opened to constructive critisism. Thanks for your time......Magnetic. Quote Link to comment Share on other sites More sharing options...
Captain Obvious Posted February 8, 2009 Share Posted February 8, 2009 No criticisms to offer at the moment, but it looks like a sweet project...I have an unnatural attraction towards XLRs! Quote Link to comment Share on other sites More sharing options...
Acarnut2 Posted February 8, 2009 Author Share Posted February 8, 2009 No criticisms to offer at the moment, but it looks like a sweet project...I have an unnatural attraction towards XLRs! Thanks Cap!!!!.....you have become an instant inspiration. You do nice work yourself.....nice color on the Porche by the way!!!!! Quote Link to comment Share on other sites More sharing options...
RodneyBad Posted February 8, 2009 Share Posted February 8, 2009 I've seen the resin Caddie b-4 but it was all in 1 piece. Lot of work cuttin it apart. What are you using for the doner? I thought the doner car was an 06 Vette? Looking good. Quote Link to comment Share on other sites More sharing options...
Acarnut2 Posted February 9, 2009 Author Share Posted February 9, 2009 I've seen the resin Caddie b-4 but it was all in 1 piece. Lot of work cuttin it apart. What are you using for the doner? I thought the doner car was an 06 Vette? Looking good.Yes you are right the chassis came from an Assembly Line Maisto 06" Corvette as the doner. Thanks for your timely reply. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.