BMC Tackle Posted October 4, 2006 Share Posted October 4, 2006 Any experience with these? Do these have to be assembled or do they come preassembled? How well do they fit AMT models? Quote Link to comment Share on other sites More sharing options...
crispy Posted October 5, 2006 Share Posted October 5, 2006 These are resin kits and need to be assembled. You should be able to make them fit into most anything, but some will need more work than others. You'll have to approach it differently than a kit as well since it is resin. By that I mean preparing the pieces for paint and glue. Chris Quote Link to comment Share on other sites More sharing options...
WoundedBear Posted October 5, 2006 Share Posted October 5, 2006 I have put a few together.....they come complete with photo-etched fans and everything needed. I would almost suggest treating the Gibson package as a model unto itself....take your time and their engines can be outstanding. Quote Link to comment Share on other sites More sharing options...
Mr. Can Am Garage Posted October 5, 2006 Share Posted October 5, 2006 These are resin kits and need to be assembled. You should be able to make them fit into most anything, but some will need more work than others. You'll have to approach it differently than a kit as well since it is resin. By that I mean preparing the pieces for paint and glue. Chris You said a mouthful Chris. I've got a 502 that I've been trying to stuff into a Revell '66 ElCamino. The engine it's self has to be assembled and it's taking (much) more work that I thought it would to fit under the stock hood of the 'Camino. Quote Link to comment Share on other sites More sharing options...
BMC Tackle Posted October 8, 2006 Author Share Posted October 8, 2006 I have never put together a resin kit. Is there a source where I can get all the info on both assembly and painting? Can resin be glued on to a regular plastic kit? Quote Link to comment Share on other sites More sharing options...
Mr. Can Am Garage Posted October 9, 2006 Share Posted October 9, 2006 I have never put together a resin kit. Is there a source where I can get all the info on both assembly and painting? Can resin be glued on to a regular plastic kit? Resin will take anything for paint even lacuer without a primer. No crazing! Building will involve some sanding and will make lots of dust if you do it dry. Resin has to be either super glued or epoxyed together. Model glue/cement will not work. Quote Link to comment Share on other sites More sharing options...
BMC Tackle Posted October 9, 2006 Author Share Posted October 9, 2006 Mr. Can AM, Thanks for the info. I figured there was something different about this type of material. I must ask, why resin? It seems there is so much in plastic. Are there any advantages with resin? There are some very nice resin kits, but it seems that most of them are only partial kits and not complete kits. These are new to me, I have never actually seen one, but I am sure that when I finish with the projects I have here, a resin kit would be a great next project. It will be interesting to experiment with one of these. Quote Link to comment Share on other sites More sharing options...
Brian Fishburn Posted October 9, 2006 Share Posted October 9, 2006 I have a couple of the RG 427 Ford motors for future projects. Looking at the kits, they look to be spectacular. The idea of treating the engine as a model in itself is a pretty good one. They are very detailed, and can yield very nice results if proper care is taken. Quote Link to comment Share on other sites More sharing options...
BMC Tackle Posted October 10, 2006 Author Share Posted October 10, 2006 Brian, I have seen the pics and they look really great. Lots of details. The pricing is not too bad on them either. Quote Link to comment Share on other sites More sharing options...
jbwelda Posted October 10, 2006 Share Posted October 10, 2006 >I must ask, why resin? It seems there is so much in plastic. Are there >any advantages with resin? the advantage of resin is that it is easy to make only a few copies without having to invest millions of dollars (literally) in injection molding equipment that is required to make plastic parts...or at least injection molded plastic parts. resin can be used for 1 to a fair number of copies with little other than the original part and a rubber mold to cast into with possibly some centrifuge like equipment to get rid of bubbles etc. thats why most garage manufacturers use resin i believe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.