1932 ford pickup truck

[Bullybeef]

2 hours ago, Phildaupho said:

Great project. I build one a number of years ago and is till one of my favourites.

Thank you Phil, I’m waiting somewhat patiently for your next installment to drop, I’m sure yours looks awesome, feel free to add any pics here that you want 😊. 

[Phildaupho]

3 hours ago, Bullybeef said:

Thank you Phil, I’m waiting somewhat patiently for your next installment to drop, I’m sure yours looks awesome, feel free to add any pics here that you want 😊. 

Thanks Bill - Here's a couple of pics of 32 Cab PU

[Bullybeef]

Moving along with the chassis and drivetrain! The lengths we go for scale accuracy can be a test of one’s patience and eyesight! 😦 all the tiny holes are drilled and now to have a couple cups of strong coffee to get the hands shaking to make a complete mess of this! Seriously kidding about the coffee.

I’m using the small block ford from many of the Revell line of 32’s, a fair bit of dechroming was done and a set of cobra valve covers from the parts bin(last set too).

[tim boyd]

Bill....interested in seeing this one progress when you have the time!  

I did one nearly three decades (!) ago....removed the cab back seat reinforcement rib....used (I think) the AMT '34 Ford pickup bed with the side moldings filed off (to reset the bed to the shorter '32 Ford frame from the Revell hot rod series), etc, etc. 

Good luck with yours...TB 

Edited May 4 by tim boyd

[Mr. Metallic]

Bil, i know you stepped away from the bench for awhile. Did this one get any further? You're off to a great start.

[Bullybeef]

4 minutes ago, Mr. Metallic said:

Bil, i know you stepped away from the bench for awhile. Did this one get any further? You're off to a great start.

It got carefully put on the someday shelf, I actually looked in the box not long ago, I had thoughts of making some changes actually( engine being one of them) it might get some time on the bench before I kick off the OBS debacle. As it seems I bay have difficulty getting the gmc bits I want. 
Time will tell Craig

[Bullybeef]

Well dang it, now I got Curious and pulled the box off the “maybe someday”shelf and had a rethink of some things. 
Rolling stock will probably be a matched set (size wise) as great as the big n littles look to my eyes, I think it would be better suited to be a little more trucklike. The cab needs some more attention to get it sitting on the frame properly, I got that sorted I think.

The bed and rear fender units will need some friendly persuasion to sit in there respective positions. So all this rethinking has led to a lot of parts box diving… and the ideas that keep spilling out on the bench for other projects, oh my here we go again! 

Thanks Craig @Mr. Metallic for the reboot.

Edited Wednesday at 12:42 PM by Bullybeef

[Bullybeef]

On 5/4/2025 at 5:41 PM, tim boyd said:

Bill....interested in seeing this one progress when you have the time!  

I did one nearly three decades (!) ago....removed the cab back seat reinforcement rib....used (I think) the AMT '34 Ford pickup bed with the side moldings filed off (to reset the bed to the shorter '32 Ford frame from the Revell hot rod series), etc, etc. 

Good luck with yours...TB 

That’s a neat take on the truck Tim, I’m liking the mild chop. Thank you for your interest in my build. I guess I only needed a gentle prodding to get it back on the bench. 

Edited Wednesday at 01:57 PM by Bullybeef

[Mr. Metallic]

Glad to see it back, hope it doesn't pull you away from the 48 coupe 

And I love that wheel/tire combo from the original Revell 32 roadster. Gives a great stance right out of the box.

[Kanada Kustoms]

Nice looking mock up!

[Bullybeef]

2 hours ago, Mr. Metallic said:

Glad to see it back, hope it doesn't pull you away from the 48 coupe 

And I love that wheel/tire combo from the original Revell 32 roadster. Gives a great stance right out of the box.

Thanks Craig, the 48 will move forward cuz we all know only one project at a time is not a likely scenario. I do like the wheels and tires as well but they think a squared setup will be more to my thoughts. 

[Bullybeef]

2 hours ago, Kanada Kustoms said:

Nice looking mock up!

Thanks Jon, it’s starting to look more “right”  as I move forward.

[Bullybeef]

Not a super big update, but a change in rolling stock has given me a little push forward. The wheels and tires are the extra steelies and tires from the revell 49 Merc kit and I think the squared size fits the truck a little better. And as a comparison an old amt 34 truck that will get a sympathetic restore some day maybe. I bought a parts lot of old amt and lindberg trucks some years back and have plopped them out on the bench many a time to do some mock ups, the last one makes me want to make a small semi or a junk yard pig with a tow boom. 

Edited 34 minutes ago by Bullybeef