Can-Con Posted July 3 Posted July 3 Greg, when you first showed this gluebombed body I thought you were nuts. Why would you even bother with something in so bad shape when it's a super=common kit and you could easily pick up a fresh one anywhere on the cheap. Now it all makes a kind of perverted sense. 🤪 👍👍👍 1 1
Ace-Garageguy Posted July 3 Posted July 3 Not very often I see something and think "dangeddy man, I wish I'd thought of that". This is one of those times... 1 2
customline Posted July 4 Posted July 4 Well I'm late to the party again. Wow, Greg, this looks like major fun. Crazy body work. What are you thinking for a chassis ? 1
NOBLNG Posted July 4 Author Posted July 4 (edited) On 7/3/2025 at 5:49 PM, Can-Con said: Greg, when you first showed this gluebombed body I thought you were nuts. Why would you even bother with something in so bad shape when it's a super=common kit and you could easily pick up a fresh one anywhere on the cheap. Now it all makes a kind of perverted sense. 🤪 👍👍👍 I’m a cheapskate…I mean I’m frugal Steve.😳 I didn’t know if I could make this look decent or not??? Plus, I really don’t need anything other than the body shell, and I knew the guy at the flea market had at least a couple of these…so for a 5 buck investment….😬 On 7/3/2025 at 6:11 PM, Ace-Garageguy said: Not very often I see something and think "dangeddy man, I wish I'd thought of that". This is one of those times... You’re welcome to jump on the bandwagon Bill. You must have one in your stash?🙂 On 7/3/2025 at 8:45 PM, slusher said: Looking terrific' Greg! Thank you Carl. Lots of decisions ahead.😵💫 On 7/4/2025 at 10:33 AM, customline said: Well I'm late to the party again. Wow, Greg, this looks like major fun. Crazy body work. What are you thinking for a chassis ? Thanks Jim! I haven’t figured that out yet. As usual, I’m making it up as I go along. I did buy a couple of small trusses to experiment with.🤷♂️ This will likely turn into another sporadic project.🥴 Edited July 11 by NOBLNG 2
customline Posted July 6 Posted July 6 On 7/4/2025 at 12:00 PM, NOBLNG said: I’m a cheapskate…I mean I’m frugal Steve.😳 I didn’t know if I could make this look decent or not???, and I knew the guy at the flea market had at least a couple of these…so for 5 bucks.😬 You’re welcome to jump on the bandwagon Bill. You must have one in your stash?🙂 Thank you Carl. Lots of decisions ahead.😵💫 Thanks Jim! I haven’t figured that out yet. As usual, I’m making it up as I go along. I did buy a couple of small trusses to experiment with.🤷♂️ This will likely turn into another sporadic project.🥴 I've made ladder bars from those. It could work! 1
NOBLNG Posted July 10 Author Posted July 10 (edited) Since the roofline no longer extends to the rear of the car, I mixed up a large batch of Milliput yesterday and slathered it on this and another ‘36 ford am fiddling with…but that’s another story.😵💫 Today I did some shaping on the ‘Vette and shot a coat of primer on to see where I’m at.🧐 And I picked up an MPC ‘67 Vette at the last club meeting that will donate it’s rear diff and suspension. Still some fabrication to do for mounts, but at least the width should be OK.😎 Edited July 13 by NOBLNG 6
customline Posted July 11 Posted July 11 Looks like you're moving right along, Boss. Not much room for a frame there, Greg. 🤔 1
ea0863 Posted July 11 Posted July 11 Coming out awesome! Cannot wait to see where you go with it next! 1
NOBLNG Posted July 13 Author Posted July 13 (edited) Another round of putty, and it still needs more….mostly smoothing out now. I fixed up both of the A-Pillars that I replaced and re-scribed the door lines too. Edited July 17 by NOBLNG 4
NOBLNG Posted 22 hours ago Author Posted 22 hours ago (edited) I enlarged the rear window slightly and managed to make a rear window and a windsheild from clear plastic. I will eventually remake them, but at least I know I don’t need to vacu-form something.🙂 I also made a firewall and attached it and the interior to the floorpan. I can fish the whole assembly in and out of the body shell relatively easy, so now I can work on the two assemblies independently. I need to do a bit more shaping of the trans tunnel and then fill the voids with Milliput. Thanks for looking.🤓 Edited 22 hours ago by NOBLNG Crop photos 1
slusher Posted 21 hours ago Posted 21 hours ago I really am enjoying what your doing with this glue bomb 💣 it’s inspiring! 1
customline Posted 19 hours ago Posted 19 hours ago Elon called. He said he has a spot for you in the design department. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now