Jump to content
Model Cars Magazine Forum

Taking pictures of your models


Recommended Posts

2 hours ago, Jon Cole said:

Smartphones are great for when you need a quick progress shot at the work bench.

 

Agreed. The camera on my phone is much better than my original digital Sony Mavica! 

I take a lot of bench top progress photos to document my progress and to find imperfections in my work. I also share them on boards and keep in my Fotki albums.

For final photos I will take pix outdoors on an overcast day. That lighting works well. For the average modeler just looking to share some photos without great gear and training, I always suggest that they take a load of pictures and in that lot they will find a few good ones. Just delete the rest since digital film is free!


 

 

Link to post
Share on other sites
57 minutes ago, Tom Geiger said:

Agreed. The camera on my phone is much better than my original digital Sony Mavica! 

I take a lot of bench top progress photos to document my progress and to find imperfections in my work. I also share them on boards and keep in my Fotki albums.

For final photos I will take pix outdoors on an overcast day. That lighting works well. For the average modeler just looking to share some photos without great gear and training, I always suggest that they take a load of pictures and in that lot they will find a few good ones. Just delete the rest since digital film is free!


 

 

Absolutely, Tom. In fact, many pro photographers will tell you not to assume that one pic we take will look good, so take several.
A lesson learned from pre-digital age!
Also, I still have my Mavica around here in it's box, collecting dust. Took the ol' 3.5 floppy, iirc. Can they take a memory stick? I can't remember.

Link to post
Share on other sites
  • 1 month later...

On of the main issues that make photos of models look odd is the distortion that you get by using the Macro setting to get really close to the subject.  When you get too close the photo distorts around the edge giving straight lines a curve.  To avoid that, most photography instructions suggest setting the camera about 3 or more feet away and use the telephoto to get close.  A good DSLR will accommodate that nicely. You get far less distortion.  

Another trick when using a DSLR is to use aperture priority to vary the depth of field.  If you open the aperture up, the background will blur and give a more realistic photo.  Some of the new phone cameras will allow this adjustment as well, but you are still limited by the size of the lens and sensor.  Getting a realistic depth of field is what gives the photo realism.  

White balance is very important for all model photos.  Most DSLRs allow the user to to create a custom white balance by sampling a sheet of very white printer paper and the camera will adjust for any kind of light.  I switched out my incandescent lights in my photo booth  for LEDs some time back and had to resample for white balance.  Interestingly, the LEDs seemed almost spot on to begin with, but setting a custom white balance is not that difficult and most cameras will save several custom white balances. Also a custom white balance workes best if you are using a light colored background.  Some digital cameras will assume that the back ground is white and that changes the colors of everything. 

The other thing to keep in mind is scale distance.  Consider this.  When you see a car, you view it from "eye" level or somewhere between 5 and 6 feet above ground level.  This is what we are use to seeing.  To look natural, the photo should be taken from an angle that replicates that "low" angle.  In otherwords on a 1:24 scale model  no more that an angle that is at about 3 inches above ground level(6 inches in 1:24 scale).  This is a "natural" angle that will give the brain the image it expects.  I also like shooting very low angle photos of models they look very nice that way. 

 

DSCN0061.jpg

Left front quarter.jpg

Edited by Pete J.
Link to post
Share on other sites
  • 1 month later...
  • 5 months later...

I built my Photo booth today.

Just apare wood and tracing paper and strong lights.

The pictures are straight out of my Cell phone. No editing at all.

 

IMG-20210201-WA0036.jpeg

IMG_20210201_112009.jpg

IMG_20210201_112125.jpg

IMG_20210201_111214.jpg

Link to post
Share on other sites

 

 

10 hours ago, TransAmMike said:

What cell phone, those are darn nice pictures, and in focus front to back.

I think any modern phone will do. Mine is a Redmi Note. Modern phones have pretty good zooms.

1) Don't use macro.

2) step back from the model and zoom in.

3) by trial and error, find out the max zoom your phone can go without compromising the quality.

On mine, I can go to 2.5x. So I zoom in and step back until the car is completely in frame.

The further back you go, the more front to back focus you'll get.

Taking pictures this way needs a steady hand; so use a tripod and the camera's timer If you can.

Lighting:

Get as much light as you can.

Don't use LEDs. Most of my LEDs give me zebra stripes on the pictures. Something to do with frequency.

I got two 150W daylight bulbs on the sides and two 20W tubes on the top lamp (my table lamp).

Hope this helps 😊

Link to post
Share on other sites

The trouble with using tracing paper is you still get the lighting reflections on the bodywork, i use studio ring lamps which work much better and hardly any reflections on the bodywork 

 

FB_IMG_1600551682623.jpg

Link to post
Share on other sites
22 minutes ago, GeeBee said:

The trouble with using tracing paper is you still get the lighting reflections on the bodywork, i use studio ring lamps which work much better and hardly any reflections on the bodywork 

 

FB_IMG_1600551682623.jpg

That's a nice result. What wattage do you use? And how many lamps?

Are they LED or fluorescent?

 

 

 

 

Edited by MarcoTJ
Link to post
Share on other sites
5 hours ago, MarcoTJ said:

That's a nice result. What wattage do you use? And how many lamps?

Are they LED or fluorescent?

Quote

 

There all LED, I've got a few, all different sizes, but there adjustable for brightness and colour temperature. 

https://neewer.com/collections/ring-light

Edited by GeeBee
Link to post
Share on other sites
6 hours ago, MarcoTJ said:

 

 

I think any modern phone will do. Mine is a Redmi Note. Modern phones have pretty good zooms.

1) Don't use macro.

2) step back from the model and zoom in.

3) by trial and error, find out the max zoom your phone can go without compromising the quality.

On mine, I can go to 2.5x. So I zoom in and step back until the car is completely in frame.

The further back you go, the more front to back focus you'll get.

Taking pictures this way needs a steady hand; so use a tripod and the camera's timer If you can.

Lighting:

Get as much light as you can.

Don't use LEDs. Most of my LEDs give me zebra stripes on the pictures. Something to do with frequency.

I got two 150W daylight bulbs on the sides and two 20W tubes on the top lamp (my table lamp).

Hope this helps 😊

Thanks Marco, great "tutorial".  Will give those suggestions a try.

Link to post
Share on other sites
  • 2 months later...

Although being a builder for 60+ years I'm amazed at diorama's and getting good photo's. So I've bought a light box..

photo-th.jpg

And used it for the first time today as I'd just finished a build. It has various coloured backgrounds so tried each colour with the same subject.

 photo-th.jpg

photo-th.jpg

photo-th.jpg

photo1-th.jpg

photo1-th.jpg

photo-th.jpg

I'm now going to try a few other shots using a small tripod. Unfortunately my one and only 'backstreet garage' is too bix to fit the new toy!

Link to post
Share on other sites

Looks good!  There are any different sizes of light boxes available out there . 30cm is one of the smaller ones.   I have one that is around 24" wide/deep/tall.

Link to post
Share on other sites

I just went onto Google search and put in the question, 'Light Boxes' and all manner of answers came up. I just plumped for this one as it serves my purpose..

photo-th.jpg

It unfolds into..

photo-th.jpg

And has various coloured backgrounds and a flat carry case..

photo1-th.jpg

photo-th.jpg

Edited by PatW
Link to post
Share on other sites

Well Pat, when you mentioned that "Unfortunately my one and only 'backstreet garage' is too bix to fit the new toy!" I stated that there are larger photo light boxes available out there.  That's all.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...