Citroen 2CV

[David@MinidreamsInc.]

now thats a crazy project ! nice work on all the 1 off building you got going into this !

[Guest arni]

Cheers Dave,it just got crazier btw..I made a rear wing with a couple of bits of alloy tube and some sheet styrene.

The kit dash and pedal box have been fitted to the firewall.

How she looks now..

[Guest arni]

Got some more done today,the front and rear bumpers have been sprayed Peugeot cossack grey.

Then after attaching the front end the shell was primed,then it got a base coat of Ford signal yellow.

The chassis and body were then sprayed Ford Neptune green.

Since it is a metallic paint it will need lacqued applied,this will be done tomorrow.

[Guest arni]

A bit more done on the CV,I decided to do a rather simple exhaust system.What I did was to take the exhaust manifolds off and fit them upsidedown,so they curve upwards.Then I fitted a short section of slash cut alloy tube onto the ends.

After painting the suspension wishbones silver,the wheels and engine were fitted to the chassis.

I made a simple harness for the seat from Tamiya tape coloured red with a sharpie.

Imagine this zooming up in your mirrors...

There are a few dust specks on it as I was doing a bit of sanding...Still needs clear coating anyway.

[Guest arni]

I have repositioned the rear wing on the turbo two......

And a clear coat applied to the shell...

[Tony T]

Awesome Deux-Cheveaux!

[skidsolo]

Looking good Nige.

[Guest arni]

It is nearly finished now,the body has been clear coated.The front bumper is fitted,as are the grille,door handles,glass and so on.