DRG Posted February 28, 2011 Posted February 28, 2011 I bought this kits several weeks ago but just opened it and took a look. I am impressed and will get a few lore of these. Perhaps I'm not a Model expert but I like this a lot. Boy I can't wait to clear the bench and start on this one.
Dr. Cranky Posted February 28, 2011 Posted February 28, 2011 I've only built one so far in my time back in the hobby and I remember it went really well. It is a good kit.
Chuck Most Posted February 28, 2011 Posted February 28, 2011 I don't remember if it's this kit or the coupe, but I seem to remember one version of this '37 having mismatched directional wheels on one side.I haven't built one in ages, but I do like this kit. About my only real gripe is that Chevy engine. Groan...
mikelo Posted February 28, 2011 Posted February 28, 2011 They are all pretty nice kits. I am glad to see they put the newer wheels in it. The only problem I have with it is that I like to build mine w/o bumpers. Doing so with this kit shows the inaccurate center panel on the rear. You can easily fix it by cutting from the body & gluing it onto the fenders. Really minor though. Mike
larrygre Posted February 28, 2011 Posted February 28, 2011 I remember when this kit first came out back in 1987. It was an immediate hit. It builds up nicely and has that "not from the 60s" street rod look to it. My only gripe, and its not really a gripe but an observation, is that the roof is chopped. Its a small chop, yes, maybe 2"-3" tops, but its not stock height. So much for my aspirations to do a stock '37. That aside, its a great kit, and the newer wheels are a nice addition.
larrygre Posted February 28, 2011 Posted February 28, 2011 I don't remember if it's this kit or the coupe, but I seem to remember one version of this '37 having mismatched directional wheels on one side.I haven't built one in ages, but I do like this kit. About my only real gripe is that Chevy engine. Groan... Chuck, I think it was the droptop with the trailer that has the funky wheels. As for the Chevy engine being a "gripe", yeah I know smallblock Fords are the in thing but remember, this kit is vintage 1987 and for then, the 350 in the kit was state of the art...!
Chuck Most Posted March 1, 2011 Posted March 1, 2011 Yeah... Sooooo glad the days of the SBC being the only choice are over! If I recall, the flattie from the '36 kit drops into this one without much effort. I think that's the route I'll go with mine. I'm thinking late '60's style custom rod, and just ignore the Mustang II IFS and Vette rear. (I admit to buying quite a few of these kits JUST for that MII frontend!)
larrygre Posted March 1, 2011 Posted March 1, 2011 (I admit to buying quite a few of these kits JUST for that MII frontend!) You and me both!
Chuck Most Posted March 1, 2011 Posted March 1, 2011 That kit was one of the very first ones I built when I returned to modeling in the '80s. I had the version that was molded in orange. I painted the body Odds N Ends Tangerine and the fenders metallic brown ... it was pretty sharp! I've bought at least one copy of every subsequent kit Revell has released from this tool. The latest updates to the coupe version, including a new TPI intake setup, are really sweet. Since everyone else is airing their minor gripes with the kit, here's mine: I wish the fenders and floorboard had been molded separately. Would've made painting a lot easier. The orange one in the old gray Monogram box art is actually the one I'm working with right now. The coupe version's TPI setup was VERY nice indeed, and the billet wheels were pretty nice, even though I'm not really a fan of billet wheels on fat fender cars.
Duntov Posted March 2, 2011 Posted March 2, 2011 Don: Thanks for reviewing this kit. I always wondered what was inside and this tells me the kit is worth it....... the price point (compared too other things on the market) pretty much seals the deal. The subject is pretty interesting. I suspect I would do a very mild flat motor powered 50's hot rod with this......will be interested to see where you take yours....please keep us informed on what you do here!!! Regards Bill (Duntov)
Chuck Most Posted March 2, 2011 Posted March 2, 2011 Ken and Dave are right= the buggy spring crossmember are gone from later issues, but the axle and hairpin are still there, or at least they've been there in every reissue I've had. Good parts box stuff.
deathskull59 Posted May 8, 2011 Posted May 8, 2011 you know what i would do if i had this kit. ill make it in to a kool rat rod with mim. rust flat black paint, a hemi, and red steelis, with white walls !!!!!
sjordan2 Posted May 9, 2011 Posted May 9, 2011 Are you going to build it stocK? Got any ideas on the paint color?
crazyjim Posted May 9, 2011 Posted May 9, 2011 That's an excellent kit. I've done a couple of them. Whatever color you choose, please make it shiny.
Chuck Most Posted May 10, 2011 Posted May 10, 2011 That's an excellent kit. I've done a couple of them. Whatever color you choose, please make it shiny. No.
Eshaver Posted May 10, 2011 Posted May 10, 2011 I built the origional version of this kit back I guess about 1989 mabye . I modified mine as I had a A M T 1936 Ford three window laying around too. I decided to combine the two and bamm, one 1937 Ford that wound up in the Amoco Projek diorama : I have to say the kit for what it consisted of went together well. I just wish stock pieces were part of the plan .... Ed Shaver
deathskull59 Posted May 21, 2011 Posted May 21, 2011 FORGET ABOUT MY RAT ROD IDEA! BECUSE IM ALSO GETING THE SAME KIT as WELL. i mite think of turning it in to a kustom hot rod insted. next wed.
deathskull59 Posted May 21, 2011 Posted May 21, 2011 i mite go with a bobbed hood though? but god all thos extra parts that could be enoughth for all my projecs!!!!!
Mustangmania24 Posted May 28, 2012 Posted May 28, 2012 I am currently working on this kit. The only problem I have had is getting the front wheels on the spindles. I am not a fan of that at all. I would prefer the front to be a little more like the rear. It would make it easier to mount the wheels than the spindles. I got mine on there but it wasnt easy.
wrecker388 Posted May 31, 2012 Posted May 31, 2012 i got the drive-in kit,it had no tires or drive-in Automatic Chevy ruined it (I like Chevy but get that auto away from a classic)
rmvw guy Posted June 1, 2012 Posted June 1, 2012 (edited) I was so excited in '87 when it was first released I bought four. I had a 1:1 '37 Coupe at the time. I sent off for my first resin coupe body for $35, at the time seemed like crazy money. I never liked the wheels and always wished it came with a flathead and other stock parts. I think the top has a scale 2" chop. Also I prefer 1/25 scale but, it is what it is. I just purchased two more recently so, I guess you could say I am a fan of the kit. It really builds into a neat vintage short track car also. Edited June 1, 2012 by rmvw guy
Chuck Most Posted June 4, 2012 Posted June 4, 2012 Something I've thought about- did anyone ever make a resin Fordor body for this kit?
Casey Posted June 4, 2012 Posted June 4, 2012 Something I've thought about- did anyone ever make a resin Fordor body for this kit? I want to say I saw one in SAE or CM years ago, but can't say for sure. Frontier or Mad Dog Models, maybe?
tooltas Posted June 5, 2012 Posted June 5, 2012 i got all 3 of 37 fords 5window is a better kit they are great kits
Jantrix Posted June 6, 2012 Posted June 6, 2012 I have built this one as well and have the coupe and roadster in my stash. By the way, if you wanted to go more traditional, I'm told the chassis and running gear from the Revellogram '40 pick-up can be modified to fit this body. They are both 1/24. It's what I'm planning on using for my roadster.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now