Steven Zimmerman Posted July 14, 2011 Share Posted July 14, 2011 Found at the local 'Advance Auto' and 'Auto Zone' auto parts stores,two part glazing and spot putty for under ten bucks. Made by 3m under the BONDO brand,3 oz. putty with .5 oz. hardener,$7.99 . The 'Icing' I've been using,while a much bigger tube,usually runs around 30 bucks a tube. I haven't tried it yet,but it works the same way,with a 5 minute working time before it sets up,and is sandable in 20 minutes....Steve Zimmerman aka the'Z'man Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted July 14, 2011 Share Posted July 14, 2011 Great tip there Steve and to add to it, that 2 part putty can be found at a NAPA or Carquest parts store as well. It might also be available at hardware store and possibly the auto section at Wal-Mart, depending on the local market. Good stuff and easy to work with. Quote Link to comment Share on other sites More sharing options...
Harry P. Posted July 14, 2011 Share Posted July 14, 2011 Found at the local 'Advance Auto' and 'Auto Zone' auto parts stores,two part glazing and spot putty for under ten bucks. Made by 3m under the BONDO brand,3 oz. putty with .5 oz. hardener,$7.99 . The 'Icing' I've been using,while a much bigger tube,usually runs around 30 bucks a tube. I haven't tried it yet,but it works the same way,with a 5 minute working time before it sets up,and is sandable in 20 minutes....Steve Zimmerman aka the'Z'man I guess you totally missed the whole long thread about this exact same thing: http://www.modelcars...=1 Quote Link to comment Share on other sites More sharing options...
Marc @ MPC Motorsports Posted July 14, 2011 Share Posted July 14, 2011 I've used that stuff too and did not like it. Just spent $48 on a pourable plastic bottle of Evercoat glaze stuff. REALLY like it! Pricey but good stuff. Quote Link to comment Share on other sites More sharing options...
Steven Zimmerman Posted July 15, 2011 Author Share Posted July 15, 2011 I guess you totally missed the whole long thread about this exact same thing: http://www.modelcars...=1 Forgive me,Harry. I am so,so sorry. This will not happen again. Steven immerman Quote Link to comment Share on other sites More sharing options...
Steven Zimmerman Posted July 15, 2011 Author Share Posted July 15, 2011 Forgive me,Harry. I am so,so sorry. This will not happen again. Steven immerman Wow. and now I can't even spell my name right. Steven Zimmerman. Quote Link to comment Share on other sites More sharing options...
Harry P. Posted July 15, 2011 Share Posted July 15, 2011 Wow. and now I can't even spell my name right. Steven Zimmerman. All you need is a little practice! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.