Primer with Semi Gloss

[Johnny Racer]

What is everyone's recommendation:

Would you use primer on parts you intend to paint semi gloss black?

[Mike Kucaba]

My general rule is prime everything,even semi gloss or flat black benefit from it as I have had both appear blotchy without it.

[Johnny Racer]

Now stupid question... I am going to use Tamiya Semi Gloss Black on a chassis and leather interior and found a can of Testors Model Master White Primer laying around unused and was wondering if I could mix the two. I'm not thinking so since the Testors stuff says its an Enamel.

Edited July 18, 2012 by Johnny Racer

[LoneWolf15]

What is everyone's recommendation:

Would you use primer on parts you intend to paint semi gloss black?

No , I don't .

I use nothing but Testors semi gloss black enamel which is alot more forgiving than most when it comes to filling and smoothing . Putting primer underneath it is only an added thickness to the part's appearance .

All of my parts are sanded up to a minimum of 1500 grit which is plenty smooth for frames , axles , shackles , etc .

As for mixing the Testors with the Tamiya , I'd test it first on a plastic spoon . Hobby paints do not always get along with other manufactured brands .