DrKerry Posted January 28, 2018 Share Posted January 28, 2018 1 hour ago, Modeltruckbuilder said: Maybe you should do something about it..... I would but don’t want to walk out on my daughter.... Quote Link to comment Share on other sites More sharing options...
Modeltruckbuilder Posted January 28, 2018 Share Posted January 28, 2018 12 hours ago, DrKerry said: I would but don’t want to walk out on my daughter.... I wasn't suggesting that you should. There are other options as well. Quote Link to comment Share on other sites More sharing options...
stitchdup Posted January 28, 2018 Share Posted January 28, 2018 Called a seller to find out where my parcel was (its a fujimi bike and roof rack set). The courier had left it on the doorstep 2 weeks before and it disappeared. After asking my neighbours if they'd seen it only one said they had and offered to let me search their house. I can nearly guarentee that neighbour stole it but have no proof. I'm not happy with the courier, he should have knocked and got me to sign for delivery, but instead I'm out of pocket due to their laziness. Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted January 28, 2018 Share Posted January 28, 2018 Had a headlight go out on my 200, which will be a pain to swap, but I did find a way that will minimise dismantling the front of the car as well as any jacking up of the car and/or laying on the cold concrete! The real problem though, finding a store with the lights I want, the 2 pack Sylvania Silverstar Ultra #9012, since 1 is $36each while the pair is $46?! The only places that seem to have them on hand are the Advance Autos that used to be Car Quests, and have kept the closed on Sundays hours! Luckily that 1 remaining headlight puts out more light than both headlights on my XJ combined! Quote Link to comment Share on other sites More sharing options...
espo Posted January 29, 2018 Share Posted January 29, 2018 6 hours ago, Joe Handley said: Had a headlight go out on my 200, which will be a pain to swap, but I did find a way that will minimise dismantling the front of the car as well as any jacking up of the car and/or laying on the cold concrete! The real problem though, finding a store with the lights I want, the 2 pack Sylvania Silverstar Ultra #9012, since 1 is $36each while the pair is $46?! The only places that seem to have them on hand are the Advance Autos that used to be Car Quests, and have kept the closed on Sundays hours! Luckily that 1 remaining headlight puts out more light than both headlights on my XJ combined! Not some place you would normally look for such things, but Wal Mart carries several different Sylvania bulbs and most are the brighter types. Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted January 29, 2018 Share Posted January 29, 2018 2 hours ago, espo said: Not some place you would normally look for such things, but Wal Mart carries several different Sylvania bulbs and most are the brighter types. At this point, I've spent more time looking for those bulbs that it would have taken to swap them both, and put new 5x7 sealed beams in my XJ while I was at it. For now, I may just put in the $30 "Basic" bulb I bought Saturday night for "appearances" in case I got pulled over, or see of one of the guys that works back in the warehouse/production area at work can do so while I'm on the phones tomorrow, then look for LED bulbs once the car is paid off this spring. I don't want to do this any more than I have to, as it requires temporary relocation of the underhood fusebox, and coolant and windshield solvent bottles as well as partial removal of the airbox so the fusebox can be moved there. Otherwise, it involves partial, if not complete removal of the front bumper and grill assemble, partial removal of the fender liners, as well as the headlight assemblies if you want to go overboard and/or do other work on the front of the car while you're at it. With my XJ, just need a couple 5x7 sealed beams, phillips screwdriver, a little light, and preferrably not horrible weather (i.e., no rain, driving snow, frigid cold, ect.) In a relatively safe area. Quote Link to comment Share on other sites More sharing options...
iamsuperdan Posted January 29, 2018 Share Posted January 29, 2018 Not rreally irked by this, more disappointed. Had to terminate someone's employment today. Totally the right decision, and I don't regret making it at all, but having the actual meeting really sucks. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 30, 2018 Share Posted January 30, 2018 19 hours ago, Joe Handley said: ... I don't want to do this any more than I have to, as it requires temporary relocation of the underhood fusebox, and coolant and windshield solvent bottles as well as partial removal of the airbox so the fusebox can be moved there. Otherwise, it involves partial, if not complete removal of the front bumper and grill assemble, partial removal of the fender liners, as well as the headlight assemblies if you want to go overboard and/or do other work on the front of the car while you're at it... To change the headlight bulbs... And people get mad at me when I voice the well-founded opinion that many new cars are designed by idiots who have no thought about making things relatively easy to maintain or repair... Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted January 30, 2018 Share Posted January 30, 2018 11 minutes ago, Ace-Garageguy said: To change the headlight bulbs... And people get mad at me when I voice the well-founded opinion that many new cars are designed by idiots who have no thought about making things relatively easy to maintain or repair... I'm beginning to have a lower opinion of those that recommend taking the front off the car to do the work, it's more work than my XJ, but actually fewer fasteners! Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted January 30, 2018 Share Posted January 30, 2018 (edited) I suppose I'll have to take my newer Jeep to the dealer when it needs a bulb changed. From what I've read on the forums, people are taking off the front fascia to replace bulbs on WK2s. In nearly 17 of driving , I never had to replace a front bulb on my old Jeep WJ. I replaced the rear bulbs several times, but the rear light housings came off easily w a couple screws. Edited January 30, 2018 by Rob Hall Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted January 30, 2018 Share Posted January 30, 2018 8 minutes ago, Rob Hall said: I suppose I'll have to take my newer Jeep to the dealer when it needs a bulb changed. From what I've read on the forums, people are taking off the front fascia to replace bulbs on WK2s. In nearly 17 of driving , I never had to replace a front bulb on my old Jeep WJ. I replaced the rear bulbs several times, but the rear light housings came off easily w a couple screws. Check around the back side of the assemblies, I'm begining to think the Chrysler designers may have engineered in a way to get at that stuff from under the hood without complete disassembly of the nose. Can't remember what site I found the underhood method for the 200's on off the top of my head, but once they pointee it out, it's actually stupid simple, requiring 3 bolts, a reusable plastic rivit, and a push in "Christmas Tree" retainer to be removed, the lower airbox isn't fully bolted down and the fusebox is just clipped into place. Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted January 30, 2018 Share Posted January 30, 2018 I've put almost 10k on my Jeep since getting it last March (34k on it now), hopefully will be a while before I need to replace a bulb...I'll check around Jeep Forum and the WK2 FB groups I'm in. Quote Link to comment Share on other sites More sharing options...
cobraman Posted January 30, 2018 Share Posted January 30, 2018 They sure don't seem to make cars easy to work on anymore do they ? Quote Link to comment Share on other sites More sharing options...
Muncie Posted January 30, 2018 Share Posted January 30, 2018 (edited) 38 minutes ago, Joe Handley said: Check around the back side of the assemblies, I'm begining to think the Chrysler designers may have engineered in a way to get at that stuff from under the hood without complete disassembly of the nose. Can't remember what site I found the underhood method for the 200's on off the top of my head, but once they pointee it out, it's actually stupid simple, requiring 3 bolts, a reusable plastic rivit, and a push in "Christmas Tree" retainer to be removed, the lower airbox isn't fully bolted down and the fusebox is just clipped into place. yep, now days there are videos on the internet for most repair procedures - headlamp replacement for the 2011-2014 Chrysler 200. https://www.carcarekiosk.com/video/2012_Chrysler_200_LX_2.4L_4_Cyl._Sedan_(4_Door)/lights/headlight Amazingly similar procedure to the headlamp replacement on a GMC Sierra... headlamp replacement for the 2015-2016 Chrysler 200 - https://www.carcarekiosk.com/video/2015_Chrysler_200_Limited_2.4L_4_Cyl._Sedan_(4_Door)/lights/headlight Chrysler added an access panel on the inner fender... Edited January 30, 2018 by Muncie Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted January 30, 2018 Share Posted January 30, 2018 (edited) There isn't much DIY on modern cars... I suspect I'll be able to change the wiper blades. About the only things I've done to my Jeep myself is screw on the license plates (after going to a dealer to get a front bracket installed), swap the summer carpeted mats for winter Weathertech liners, and put on a seat cover over the back seat for the dogs. Edited January 30, 2018 by Rob Hall Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted January 30, 2018 Share Posted January 30, 2018 42 minutes ago, Muncie said: yep, now days there are videos on the internet for most repair procedures - headlamp replacement for the 2011-2014 Chrysler 200. https://www.carcarekiosk.com/video/2012_Chrysler_200_LX_2.4L_4_Cyl._Sedan_(4_Door)/lights/headlight Amazingly similar procedure to the headlamp replacement on a GMC Sierra... headlamp replacement for the 2015-2016 Chrysler 200 - https://www.carcarekiosk.com/video/2015_Chrysler_200_Limited_2.4L_4_Cyl._Sedan_(4_Door)/lights/headlight Chrysler added an access panel on the inner fender... Ah ha!!! That first one is the video I saw that recommended to move the fusebox, coolant and window washer bottles! Rob, you might want to look on there for how to change the bulbs on your Grand. Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted January 30, 2018 Share Posted January 30, 2018 I had a factory shop manual DVD for my WJ..that was pretty useful, had exploded diagrams as to how things went together. Craziest DIY task I did was back 2009 when I replaced the broken driver's seat track on my WJ--that was a challenge to put it mildly..in a carport on a 105 degree AZ August evening. Took the old seat out, disconnected the connections for the various power seat motors, reconnected to a used seat and track I bought on eBay and got delivered via Fed Ex... only bled a little, stabbing my hand w/ a screwdriver. Don't think I will attempt anything like that again.... Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 30, 2018 Share Posted January 30, 2018 59 minutes ago, cobraman said: They sure don't seem to make cars easy to work on anymore do they ? Probably just as well. As easy as it was to change the old headlamp bulbs, I've seen at least a dozen put in upside down. Stupidity knows no bounds. Quote Link to comment Share on other sites More sharing options...
Muncie Posted January 30, 2018 Share Posted January 30, 2018 14 minutes ago, Joe Handley said: Ah ha!!! That first one is the video I saw that recommended to move the fusebox, coolant and window washer bottles! Rob, you might want to look on there for how to change the bulbs on your Grand. Joe, I will agree with you on the Sylvania Silverstar Ultra bulbs - they are worth looking for. Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted January 30, 2018 Share Posted January 30, 2018 1 hour ago, Muncie said: Joe, I will agree with you on the Sylvania Silverstar Ultra bulbs - they are worth looking for. I'm trying to research LED bulbs, but can't find much about them and the reliability as of yet. Kinda want LEDs for both, but the ones for my XJ are probably more than the rusty old Heep are worth. Quote Link to comment Share on other sites More sharing options...
iamsuperdan Posted January 30, 2018 Share Posted January 30, 2018 18 minutes ago, Joe Handley said: I'm trying to research LED bulbs, but can't find much about them and the reliability as of yet. Kinda want LEDs for both, but the ones for my XJ are probably more than the rusty old Heep are worth. In my old 93 XJ, I ran the IPF replacements with their H4 replacement bulbs. Was an amazing upgrade. Huge bang for the buck. https://www.quadratec.com/products/97017_1600.htm I ran them with the IPF H4 Magic Bulbs with the green glow ring. Kind of cheesy but I liked them. LED headlights are a challenge here, as they don't generate enough heat to melt any ice or snow build up while driving. Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted January 30, 2018 Share Posted January 30, 2018 I've been thinking about getting the clear GTS light covers so I can attack those with a scraper and not hurt the pricey lights! Quote Link to comment Share on other sites More sharing options...
Dragline Posted January 30, 2018 Share Posted January 30, 2018 Please folks. Come to NAPA for parts and advise. While I cannot vouch for the advise at all locations the parts should be there or close by. 9012 bulbs [or 9012LL Long Life] are in stock at my store. Between the three of us on the counter there is nearly 100 years of experience. NAPA pays far more than any others "parts stores" and thus attracts competent counter people. I cannot say for sure who you'll encounter at your NAPA but I can be certain they will be ASE certified. Parts counter ASE is indeed different from garage ASE but it does require competence to pass. I am true ASE and Bosch certified with nearly 20 years working on Euro autos from A to Z. I personally keep informed about the latest car woes and having a friends garage on each side of my store doesn't hurt either. But don't trust me my car leaks every fluid other than wiper blue water. Now to go dig out my car before work. Looks like we got a couple of inches overnight. Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted January 30, 2018 Share Posted January 30, 2018 Tried my local store, don't have what I'm looking for. Quote Link to comment Share on other sites More sharing options...
peteski Posted January 31, 2018 Share Posted January 31, 2018 22 hours ago, iamsuperdan said: In my old 93 XJ, I ran the IPF replacements with their H4 replacement bulbs. Was an amazing upgrade. Huge bang for the buck. https://www.quadratec.com/products/97017_1600.htm I ran them with the IPF H4 Magic Bulbs with the green glow ring. Kind of cheesy but I liked them. LED headlights are a challenge here, as they don't generate enough heat to melt any ice or snow build up while driving. While not specifically directed at you, I absolutely hate car owners who install all those super bright headlights in their cars. They are blinding the oncoming drivers (and don't tell me that they are just misadjusted). No, they are just too BLAH_BLAH_BLAH_BLAH bright!! HID projector headlights are also pretty bad when it comes to blinding oncoming drivers (especially if the road is uneven and they shine right into my eyes while they go over a bump on the road). The worse are them new LED headlights. Even factory installed - they are no only extremely bright, the bluish tint makes it even worse. What happened to regulations which used to define the brightness and light pattern of a headlight? Those seem to have gone the way of a DoDo bird! Sure, you in you big SUV, you can see the road much better with those lights, but what about being considerate to the oncoming drivers? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.