Vetteman15 Posted March 18, 2014 Share Posted March 18, 2014 Hi folks, looks like I over did the coats of Alclad chrome and now have a dull finish. I am learning and did not realize Alclad needs to be misted using very light coats. I kind of used the same rule of thumb for a regular color application and sprayed too much on the parts. So with that, I want to strip the parts and start over. Has anyone used Super Clean to strip Alclad chrome? I thought I would ask before trying it. If it is a problem I can finish the model as is and try my Alclad skills on the next build. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Old Buckaroo Posted March 18, 2014 Share Posted March 18, 2014 (edited) I just used Windex to strip one of my mistakes. (airbrush spit) Base coat Black was unaffected. Edited March 18, 2014 by Old Buckaroo Quote Link to comment Share on other sites More sharing options...
Vetteman15 Posted March 18, 2014 Author Share Posted March 18, 2014 Interesting, I thought it was a lacquer paint? But if it is not I can see how Windex would work just like removing the factory chrome. Thanks for the suggestion. Quote Link to comment Share on other sites More sharing options...
Quick GMC Posted March 18, 2014 Share Posted March 18, 2014 It needs to misted on, very low psi, like 12 or so. Also, I watched a video on Youtube that said to mist on coats at an angle, about 45 degrees. This has helped me as well. when you are done, take an extremely soft or smooth cloth, like kleenex or a polishing cloth and give it a really light couple of buffing passes. This will get rid of the fine paint dust that dries on the surface and shine it up a bit. Quote Link to comment Share on other sites More sharing options...
Vetteman15 Posted March 18, 2014 Author Share Posted March 18, 2014 So the Windex trick worked and now I can try again. Thanks everyone for helping me out. Quote Link to comment Share on other sites More sharing options...
jaydar Posted March 18, 2014 Share Posted March 18, 2014 I too appreciate the tip. I did not know this. Thanks, Joe. Quote Link to comment Share on other sites More sharing options...
Bill J Posted March 19, 2014 Share Posted March 19, 2014 Great info to know, thanks for the Windex tip. I juts used Alclad for the first time recently and did the light mist coats and all worked out perfectly. I am sure the strip technique will be useful to me in the future. I also did not know that a light buff will improve the shine, I need to try that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.