REAL MACHINED ALUMINUM TRUCK WHEELS! THE MOST ACCURATE EVER MADE!

[Ben]

Updated post below

Edited January 7, 2015 by Ben

[Ben]

***NEW, NEW, NEW*** from Class A Resin/Caleb's Custom Cases!!
Real aluminum ten hole wheels with real aluminum domed front center hubs and real aluminum top hats for the rear wheels. The front hubs mount from inside the front wheels. The rear top hats have a pin on the back side that slides through the center hole of each rear wheel, aligning them to each other. The lug holes in the top hats align perfectly with the lug holes in the wheels so that the pins on the lug nuts can pass all the way through the top hat then both wheels. These are sold as a set of ten wheels, two front hubs, four top hats and a tree of 65, 3D printed plastic acorn lug nuts. (As shown in the pictures).

Precision machined, real aluminum, acorn lug nuts (shown on the assembled wheels) can be substituted for the plastic lug nuts.

The wheels and hubs can be purchased highly polished (spun at high RPM on my lathe) for an additional cost.

These sets are VERY limited!!!!! They are first pay, first served! SERIOUS INQUIRIES ONLY!!!!!! Please do not waste my time if you are not serious about buying them exactly as they are stated! Wheels are ONLY sold in sets of ten! If interested, please send me a message.

[Ben]

Please see my website for pictures. Click on "Products" in the upper right corner of the home page and then scroll down to "real aluminum accessories". There you can see everything

I currently offer. I can be contacted directly through my site.

http://bwicke9.wix.com/class-a-resin

Edited January 9, 2015 by Ben