Jump to content
Model Cars Magazine Forum

Recommended Posts

I must admit, with the re-issue of this kit I'm surprised there haven't been more of these on the go. A search for Datsun yields few results; I guess this little guy isn't that popular!

This current project has its beginnings about seven years ago when I built it up as so:

81datsun720-1.jpg

It was pretty good for my skills at the time. After I built this, I moved a few times and with all the packing and un-packing of my built models, I noticed something on this build each time that I wish I had done differently. Last year, a friend of mine gave me another one of these kits boxed as a snap version. I got to looking and reckoned I could build a longbed version out of the two kits. Let me tell you, it ended rather disastrously. So now I had two kits, without beds, and a bit mangled. In my searches, I only found reference to one other builder that separated the cab from the bed and now I know why: it creates a lot of issues! My club's annual New Year's Challenge is on the go; I already finished the Scout II and with a few weeks to go before the judging, I thought maybe I could squeeze in another build. This simple kit fit the bill and I dug around in my stash to figure out my options and came up with this.

20150112_000055.jpg

20150112_000115.jpg

California Step Side! I figured if the conversion bed was good enough for a 620, it was good enough for a 720. The above pictures were taken last night as I was getting things sorted out to make sure it would work. Today was a productive day, although the end shots of the mock up don't look too different from the above pictures, even though there was a lot of work to get to that point!

I drilled out the wheels and grabbed another one to turn into a spare.

20150112_124856.jpg

20150112_235021.jpg

The pictures turned out kinda fuzzy, so I will take better ones in the morning. To get to this point, I cut everything out between the frame rails from the cab back and rebuilt it all. I also built the rear cab wall and for the first time tried using the sprue + glue mixture for filling in gaps. Going to let it sit overnight and try sanding and see how it turned out.

Edited by kataranga
Link to post
Share on other sites

Cool little project! I built a Chevy Luv that had the stepside bed and I had an old fleetside bed also that was beyond restoring. I took the matching rear fender arches from the fleetside bed and grafted them onto the stepside fenders. It looked a lot better with matching fender arches.

Link to post
Share on other sites

For the purposes of this project, I will be proceeding with the bed as depicted. I do have a number of these 1/4-ton sized beds, however. At some point I will attempt putting the Datsun wheel arches on one and painting the bed to match. :)

Link to post
Share on other sites

Okay, I took some pictures of current progress with my proper camera rather than my phone. Since the last update I've smoothed out the new rear cab wall and scribed the panel lines.

DSC_4975.JPG

DSC_4976.JPG

DSC_4977.JPG

I tried to take a close-up of what I did to the portion of the seat backs that can be seen from the back window, but it turned out a little fuzzy:
DSC_4978.JPG

And, again, a little fuzzy but shows the back of the cab:
DSC_4979.JPG

And here's the back half of the frame with new crossmembers and bed mounts. Don't have anything done for the fuel tank yet.
DSC_4980.JPG

I guess I really need to take some good pictures in the sunlight, but it was -16°C today so no outside pictures!

Edited by kataranga
Link to post
Share on other sites

I finally managed to get some good pictures. I've also added a black wash to all the panel lines and grilles. I've been trying to get the hang of this wash thing, may have finally figured it out. :)

DSC_4982.JPG

DSC_4983.JPG

DSC_4984.JPG

Link to post
Share on other sites

Thanks, Dad! B)

Managed to get most of the paint work done today. By the time the paint was dry enough to handle it was too dark to take any good pictures, but I did manage to get a few shots in primer. It was satisfying to see it all in one colour.

IMG_4284.JPG

IMG_4285.JPG

IMG_4286.JPG

Link to post
Share on other sites
  • 1 month later...

Not being able to leave well enough alone, and having the extra parts available, I built a trailer for my Desert Rat Datsun to haul around. It will be painted to match the truck.

DSC_5027.JPG

DSC_5028.JPG

DSC_5029.JPG

DSC_5030.JPG

The frame rails, leaf springs, and wheels and tires are from the same parts kit as the cab for the truck. The hitch and trailer tongue are from the MPC Open Road camper. I cut out the axle's centre section and replaced it with brass tubing sleeved with styrene. The bed itself is the Revell mini-truck piece, this time from a Datsun 620 kit.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...