Pete J. Posted March 20, 2009 Share Posted March 20, 2009 Here is a radiator that I made for my Tamiya 935 project. These are the PE parts from the SMS kit. They were originally intended to be glued over the plastic radiator(the white plastic piece in the photo. I decided that I wanted to test my soldering skills and have a "see thought" part, so I soldered some 1/32" brass angle to the backs and then soldered the piece together. The radiator is not a perfect rectangle. In fact far from it. The sides are very much curved and the rear is larger than the front so getting the pieced to together is a bit of a challenge. Quote Link to comment Share on other sites More sharing options...
Pete J. Posted March 25, 2009 Author Share Posted March 25, 2009 Another piece completed. This is the turbo boost controller and the gear shifter. 21 pieces, mostly held together with solder. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.