[1980's MotorMaster model kit]

Finished the Motor Master tractor three days ago. and Finished the trailer well waiting on the bare metal foil to come in from amazon, so I can add the pin stripping and the decepitcon logo to the trailer, Sorry the rims is not Brown I was close when I took these pictures The 2 car in the picture i will be cutting in half to make Motor Masters car, but not sure which side to cut, gotta mke them the same, I will enclose the picture of the 1980's car for Motor master 

[1980's MotorMaster model kit]

Here is some up to date on the tractor,  (any Idea for the trailer that is wrap?) how to correct this ? I have tryed warm water soak for and hour and then put some weight on it. Still bows 

[1980's MotorMaster model kit]

Here is the ghost light gray I am using. This is one side of the trailer again waiting on more paint to come in it's by 

Testor Corp.

Light Ghost Gray Testors Acrylic Plastic Model Paint

Thank you all again for viewing and posting your comments.

[1980's MotorMaster model kit]

OK i am waiting on more paint for this kit build and I thought I will share with you all my next idea to make this complete.. Since I have a Nascar trailer for this model build. If you look at the picture you will see a black car with 2 front ends,

So fo this I bought two Revell 1/24 Lamborghini Countach LP500S Plastic Model Kit, I will cut these two cars in half and glued the two front ends together to make this, I am also trying to figure out how to add the (Fiber optic's) or (led) (halogen) to this, I have 4 double A battery terminals and 1 C-Battery terminal. any ideas thank you for viewing and posting your comments.  Sorry for the CAPS.

[1980's MotorMaster model kit]

The trailer frame axle 

[1980's MotorMaster model kit]

Jantrix Thanks for the information it work out better, gotta a touch up on the axles,

It does make it easier. 

[1980's MotorMaster model kit]

 appericate the info very helpful.

[1980's MotorMaster model kit]

Here is the trailer frame painted With the Purple thanks for reading and stopping by,

(I am looking for some information or ideas on the Lighting the tail lights, I have Fiber Optics and LED pre-wire and resistor

and Idea) thank you again for stopping by and reading, Hope you enjoy this build,. I have a battery trays that is 4 C- Batteries, and 6 double A battery trays, with on and off switch, 

[1980's MotorMaster model kit]

I gotten the Nascar trailer in about 25 ,minutes ago,here is the picture of the trailer. Wish I could have found the Beaded trailer from AMT, but again Got work with what is out there, and this trailer i won from E bay for $10.00 so I really can not complain.

[1980's MotorMaster model kit]

Thank you for the follow, I'm new to the whole idea with Fiber optic and LED Lighting,. but a first time for everything, Thank you again for the follow

 

[1980's MotorMaster model kit]

Here is the Model Kit I will be using to make the 1980's MotorMaster, It's by Revell Kenworth K-100 Aerodyne, I am also waiting on the delivery of the Nascar trailer model kit to come in today That i will be using for the trailer, since I could not find the Amt beaded trailer, but it would work, thanks for stopping in and having a look, please leave your comments

[1980's MotorMaster model kit]

The last two pictures I will be using the purple because it was in the 1980's where Optimus Prime and MotorMaster played chicken and MotorMaster was purple and black ( and I will not paint over the chrome on the side of the Cab,)

[1980's MotorMaster model kit]

Hi all I am going to be working on the Decepticon motor master model kit, I will be using the 1980's version, 

Picture will be up soon of the Revell Kenworth K-100 Aerodyne Cabover that I will be using, I am waiting on the trailer from ebay. I will be using a nascar hauler trailer model kit, since I am having bad luck find the amt beaded trailer.

anyways thanks for stopping by and having a look

p.s I will be trying to add LED light on this kit as well, looking into a micro drill for the 1:25 scale model kit.

I have added a few picture of the transformer from the 1980's, so you can see what the MotorMaster looked like from the 1980's transformers, and once again thank you for stopping in and having a look,

again i know it's been a few years since I have posted 

[Peterbilt 359 Wrecker]

I have made a cat bed and sit it by my hobby room with a latch on the door where the car wont enter and I also went out and bought a new wrecker, painted the frames red, with yellow air ride cushion, and know I gotta figure out which color to paint the cab, and the bed I have used a light tan for the walls, know stuck on the cab color. thanks for the help

[Peterbilt 359 Wrecker]

wish my destroyer would do that. but no he wants to get into trouble

[Peterbilt 359 Wrecker]

here is a picture of a cat problem in the hobby room. sneaky Bast&*r

will back to the drawing board. with a few before the huge destroyer has sneak into the hobby room

[Peterbilt 359 Wrecker]

thank you , it was coming out nice until my daughter kitten gotten into my hobby room and knocked it down and pieces are all over the place. so going to clean it up and rebuild repaint it. have pieces soaking in paint thinner as I am typing.

[Peterbilt 359 Wrecker]

thank you I am trying my best on it. alittle more left on it and I will post the pictures of it when done spending time with the family.

[Peterbilt 359 Wrecker]

I am free hand painting, but I do miss my airbrush gun

[Peterbilt 359 Wrecker]

thank you

[Peterbilt 359 Wrecker]

Here is and up - to -date on the build. need to do some touch up once the paint has dryed. got to hand paint them my airbrush gun has finaly kick the old bucket. after been away from model kits for a few years. but anyways , looking good.

[Styrene HELP]

I agree with you on the buses today, but and average van trailers 14' 3" high, if you look on the side of them and don't get it confuse with these number 28' 48' 53' these are the length of the trailers.

[Styrene HELP]

when I used to drive rigs their was sign post for 14' 5" in the back woods side streets are usually mark that low.

[Peterbilt 359 Wrecker]

well the body and sides are painted. man I do miss my airbrush, the masking tape peeled some of the paint off. anyways the boom is painted to, got to do some touch up some time today. man I got to get me another airbrush gun. lol

[Peterbilt 359 Wrecker]

frame is done with wheels. wheels are alittle off gotta fix them and the driver seat and passenger seats are don. cab and bed prep and ready for the paint room today, but gotta figure out what's wrong with my airbrush gun, anyways, it's getting their.