Jump to content
Model Cars Magazine Forum

Justin Porter

Members
  • Posts

    1,213
  • Joined

  • Last visited

Posts posted by Justin Porter

  1. Small but important update. Color has started going down on the Impala and I'm happy to say I'm getting just about EXACTLY the color that I wanted. There's still some color sanding to do on the Mr Color C10 Copper base coat on the body and hood, but the chassis plate has already received its coat of Mr Color C47 Clear Red over the Copper and I am very pleased with how it's looking. I can't wait to see how it looks on the more fully finished body especially under a coat or two of clear. 

    20230918_195632.jpg

    20230918_195640.jpg

  2. 11 minutes ago, mikos said:

    You guys make some excellent points.

    I do think there is a demand for at least some of the subject matter that Johan did.  Personally, I get very bored of the same subject matter being recycled by some of them.  First, it was Round2 with the (MPC based) ‘73 Mustang in the heritage box, then it was the 007 James Bond issue with semi corrected “1971” front end and then Revell comes out with their all new tool ‘71 Mustang that blows the Round2 versions out of the water.  

    The ‘69 Charger was another one that was similar.  Round2 had the ancient DoH kit and released it with the revised rear window, then Revell did their own new tool ‘68-‘69-‘70 Charger.  Years later, Round2 does a promo style snap fit with all new tooling.  It can get kind of repetitive.

    Some older Cadillacs and Oldsmobiles would add some interesting subject matter back into the catalog.  I’m thinking it would be easier and less expensive to scan the old kits than produce something that has never been kitted before like the dream models I posted above.  If detail is a problem, they can tool up a more detailed chassis, but I don’t really see the need. Some of the later Johan kits were on par or even above what the others were doing back then.  Look at the Turbine Car or the models they did under the “Classic Series”.  In many ways, those kits rivaled what was being made back then and even compete detail-wise with many of the kits being made today.

    I know some modelers don’t like the ”Craftsman” kits due to their simplistic nature, but I love them.  They offer a lot of value for a low build effort.  The ‘63 Nova Wagon sold well from what I’ve read.  

     

     

     

    Okay. Let's break down your argument thusly. 

    1: Subject Matter Repetition - In military modeling, more obscure subject matter equates to lower production numbers and higher pricetags for equivalent detail in a plastic kit. Currently, there are a handful of model car companies that have this business model.

    Ebbro for vintage F1 cars.
    NuNu for modern and vintage touring cars and rally cars.
    Belkits and DModel for rally cars.
    Salvinos JR for American circle track subjects
    Moebius for classic American cars

    It's quite all right to prefer less common subject matter, but the understanding has to be that the burden of the lower sales numbers gets placed on the consumer. 

    2: Scanning Older Kits - If it was as simple as plunking an unbuilt original down underneath a LIDAR scanner and pressing "print" then Round 2 wouldn't take as long as they do on the Craftsman kits. Even a straight copy requires post-scanning 3D modelling work to clean up the scan, re-engineering of injection points and ejector posts to match the function of modern molding equipment, and that's setting aside the murky waters of who actually owns the Intellectual Property that IS the design of the Johan kits. Is it worth it to an existing company to pay for the rights to recreate tooling that no longer exists? Likely not, particularly to the two companies whose livelihoods are retro reissues - those being Atlantis and Round 2. 

    3: Johan Models Could Compete With Modern Kits - This is a laughable statement, bordering on insulting. Look in the box of Tamiya's McLaren Senna. Look in the box of Ebbro's Brabham BT-18. Look in the box of ICM's Benz Patent Motorwagen. Look in the box of Moebius's AFX Chryslers. Look in the box of Hasegawa's Lancia O37. There is NOTHING that Johan has ever produced that holds up to the modern standards of the 21st century. And yes, that includes the much vaunted Chrysler Turbine car with its awful out of scale hinges, horrid panel gaps, and compromised front suspension detail for the sake of the "steering" function. And that's the BEST that Johan ever had to offer. The bulk of their kits are saggy, muddy, hole in the block, chrome headlight, seats molded to the floor of the interior tub JOKES like their '68 AMX. 

    We don't need the old Johan kits back. We don't need JOHAN back. We need modern kits of Johan's subject matter and builders who are as willing to pay ACTUAL prices for those kits the way that rally builders eagerly plunked down their $60 when DModel announced a Ford Sierra. 

    • Like 5
  3. 12 hours ago, gary jackson said:

    are there any other 32 ford roadsters  amt revell monogram fenderless with a straight up windshield and proportionate

    s-l500.png

    s-l1600.jpg

    Track down either of these releases of the Revell '32 Ford Highboy. They share their tooling with the other modern Revell '32 Fords with an excellent chassis, Ford 302 engine, and very neatly proportioned body. The current '32 Roadster kit with the Duvall windshield has its origins in this tooling, but there were some alterations done so that it's not exactly the same tooling. 

  4. 8 hours ago, mikos said:

    I am convinced that there are outside forces working against Okey trying to make a go of it in whatever limited fashion that he can.

    Incompetency is not an outside force. His inability to even get a reasonably details 3D printed resin kit out the door proves that beyond a shadow of a doubt. Compare the absolute farce of attempting to promote and distribute the Powell to USCP's Citroen SM, or the resin powerhouse that is Alpha Model, or other similar one man bands like Iceman Collections and their Lamborghini Urus and upcoming Vector W8. And this is from a man with - supposedly - decades of experience producing scale models whom has the added luxury of representing a classic prestige brand in Johan. 

    People, like myself, who say let Johan die aren't opposed to the subject matter that Johan has kitted in the past. I would be over the moon if Moebius or Hasegawa or Revell or Iceman or anyone else (maybe excluding Round 2 unless they offered assurances it wouldn't be a "Craftsman Plus" style antique) announced an SC/Rambler or a '66 Toronado. Speaking specifically for myself, I want the hobby to move on from Johan. They had their time, it was in the 20th century. We're now nearly a quarter of the way through the 21st century and it ought to be clear that Johan isn't joining us in it.

    • Like 3
  5. 4 hours ago, beeRS said:

    Nice work so far. Interior panels are particularly good.
    I love resurrecting old builds that a ‘younger me’ started. It’s always fun trying to figure out what you were thinking with the build back then. 
    I’m not familiar with AK filler primer, but it’s obviously fine to spray over enamel paint. I’ve had awful trouble spraying primers over enamel in the past and I just avoid it now. What type of paint is the AK primer? Can you spray lacquers over it?

    The AK Filler Primers are an enamel primer that they developed for their Xtreme Metal range of enamel metalizers, but it's an excellent companion to Mr Surfacer so I tend to use it as often as Mr Surfacer. So far, I've had no problem with Gunze Mr Color lacquer or MCW lacquer over it, but I haven't tried it as the base with anything hotter than those.  

    • Like 1
  6. The work continues. I decided to tackle a bit of the interior given the high quality of the Revell tooling. First went down a bit of Mr Surfacer 1500 Black followed by some Mr Color C68 Red Madder. A little bit of Bare Metal Foil and a few licks of C8 Silver plus some Red Ken's Fuzzy Fur and it's well on its way.

    20230913_172041.jpg

    20230913_173535.jpg

    20230913_194429.jpg

    • Like 6
  7. 12 minutes ago, customline said:

    Just curious here....what engine was originally in the Impala kit? 

    The kit engine for the coupe was a very nicely done 396ci big block while the convertible kit actually - and accurately - had the last SS Impala 409. Both engines were really well detailed and I wouldn't have seen a need to swap the kit 396 if it hadn't been lost to the ages.

  8. Wanting a "healthy cruiser" for the theme of this build after having gone over the various parts and rifled through my spares, I set about building the engine. I dug up a spare 427 and four speed from a Revell '67 Corvette roadster kit and proceeded to hang the Impala's accessories on it, wanting to preserve such amenities as A/C and power steering. I found the P/E pulley faces and a Model Car Garage resin and P/E Edelbrock air cleaner in my detail bin and decided those would be appropriate dress up parts for this build. Naturally this means I will be tracking down an electric fan to go onto the radiator in place of the stock fan. I will still add ignition wires to go with the fuel line as well as track down a fuel pump to which I can route the other end of the carb feed line. 

    20230910_135645.jpg

    20230910_143043.jpg

    20230910_151349.jpg

    20230910_160603.jpg

    20230910_195815.jpg

    20230910_195828.jpg

    20230910_195840.jpg

    • Like 7
  9. After the more intense build that was the Fujimi Dino, I figured I would be better off building something a little more restrained as a follow up. Down into the basement I went and up I came with this tired box. Somewhere around twenty years ago I attempted to paint the body a sort of metallic tomato red. As a color, it works nicely, but this old enamel paint clearly didn't lay down too well AND was apparently sprayed right over the bare plastic. I leveled it out with a 2400 grit sanding pad and down has gone some AK Interactive gray filler/primer. Taking stock of the kit contents, we were short the factory stock seats with some undersized - possibly AMT - C4 Corvette seats in the box instead. Parts of the EFI setup from the AMT/Ertl release of the '70 Chevelle SS454 were in the box, but no engine block/transmission was present. We've got no factory stock tires, we're missing one upper trailing arm, and at some point it looks like some sanding was being done to clearance the inside of the body for wider rear tires. 

    I don't know what younger me was thinking on this one, but I think I can make something out of it now.

    20230907_180648.jpg

    20230907_183648.jpg

    20230908_195912.jpg

    • Like 7
  10. 7 minutes ago, GMP440 said:

    So, what's the final outcome of the Powell Pickup.  Were any sold?  Last word on this was that someone stole the finished model that was supposed to be displayed.

    As of right now the whole project has gone dark because of the "stolen test sample." Without question, it's an entirely absurd situation. It's a 3D printed kit. Not resin cast or injection molded, but 3D printed. USCP, Texas 3D Customs, Iceman Collections, and countless others have produced 3D printed kits in greater detail compared to what was shown with the proposed Powell AND with shorter lead times AND with tremendously better promotion. The fact that he can't even pull off this project, which had to have been principally farmed out as far as the 3D modeling and rendering so it was effectively Spaulding bankrolling, rubber-stamping, licensing, and promoting the effort, has got to demonstrate that there's more life in a cafeteria meatloaf than there is at Johan.

  11. On 9/3/2023 at 8:21 PM, Can-Con said:

    Okey may still be alive and strong but JoHan certainly is not. 

    Like Bob said, the only thing he has right now is the JoHan name and some assorted parts. I highly doubt he even has any licensing from any car companies to produce the models anymore. 

    The only good thing about the JoHan Road Runners was the bodies anyway. Round2 would be much better off just scanning a real Road Runner and using it to create a new body for their existing chassis. After all, that's about what most builders who want to build a more serious replica do, just use the body parts and swap out a much better chassis. 

    This has been gone over again and again on this board so many times it should be a pinned topic. ?

    Add me to the list agreeing here. The Powell Pickup saga should have ably demonstrated that the Spaulding incarnation of Johan is well and truly done. Johan isn't pining for the fjords here, folks.

  12. 6 hours ago, kjohan said:

    Beaitiful both of them 

    The SWB from the Italeri kit ?

    Thank you and the 250GT SWB is from the Gunze Sangyo kit. I think I probably would have enjoyed the Italeri kit more though!

    3 hours ago, Rich Chernosky said:

     

    That really turned out nice Justin.  Really enjoyed the WIP...thanks for doing that.  Are you going to put a plate on the back and license it for the street.  Be a shame not to. 

    I have an offer from a friend to make a custom plate for it, I just haven't quite decided what it will say!

×
×
  • Create New...