wolfer

hey THANKS for your fast reply . i never thought of floquil paints right now i got a bug up my but and am doing the weird-ohs and old aurora monster models.what brand of flow medium and what does it do ???? THANKS AGAIN now its off to look for the paint THANKS AGAIN OH AND BY THE WAY you really got me into this car thing you got going on rob

first let me say WOW can i say it again WOW AWESOME BUILD !!!!!!!! this is the first time i have seen anything like this WOW ok let me get by the WOW factor lol. this has opened up a whole new street of modleing for me thank you .now for a couple of ? if you dont mind. i take it you are using the gameworkshop paints i have tried the game color paints on a weird ohs figure with VERY BAD results at the store they said it could not be airbrushed so i tryed to brush it BAD IDEA anyway i also own a iwata airbrush can you tell me what you use and how much to use ? to airbrush the gameworkshop paints i will be trying these soon THANKS for any and all help rob

i need to glue the body halves back together on a deora that i made longer should i use 5 min epoxy super glue or liquid glue THANKS rob

airbrush question from below post

hey all since my last post i have checked into the iwatta brand airbrushes . and as soon as i held 1 i could tell the difference between the aztek i have and the iwatta. my ? is i will be buying 1 from the ECLIPSE ?? line and was told that none of these will get me a line big enough to do a 1.24 or 1.25 scale body .but on the iwatta website it says they go from a thin line to 1and 1/2inches who is right AND ALSO using any solvent based paint or car paint is not A GOOD IDEA but in a flame book i was looking at a lot of the 1'1 guys use these brushes any more info would be GREAT THANKS AGAIN

ok so far i learned to use 5 min epoxy for the glue i will be cleaning it with alcohol. do i leave it sit in a container of the stuff or do i just wipe it down? and then clean with water and is there a way to know that it is clean ? all the resin i have is jimmy flintstone but would i use these steps for any resin THANKS FOR ANY AND ALL INFO

ALLRIGHT GUYS SO FAR I KNOW TO USE 5 min epoxy for the glue and bleach white or alcohol to clean. do i let it sit in a container of the stuff or just wipe it down?? THANKS

THANKS ALL for taking the time to reply and for the opionions i made my mind up when i get some fun money together its the iwata till then i will use the aztek THANKS AGAIN

hi. the resin i want to build is made by jimmy flintstone. i have 1 anser already from a below post by bluesman mark to clean with isopropyl alcohol. but how long ??and how do you know its done ?? what is a good glue for resin ?? and last i want to try my airbrush on these would acylics work??? THANKS FOR ALL THE INFO

i now have a aztek that is really not as bad as people think. if you clean the brush and take apart the tips every now and then it works fine . i use it for enamels and acrylic so far but have my eye on a iwata are these good brushes?? how much better than what i have now?? THANKS

it doesnt happen all the time but has happened with both tamiya and duplicolor??

hey all. been reading about the uses for future whice i will be buying this weekand. but anyway i was wondering i use eurosoft evercoat as a putty for my models and it is a lite blue color. somtimes the primer will not entirely cover the blue do you think the future would act as a barrier first and then prime over the future?? might give better results?? just a thought also i have heard the tamiya compounds work well to polish the future just thought i would pass it along thanks

looks great i have been a huge tom daniel fan for a long time gotta love those showrods nice job

HI .THAT LOOKS GOOD IN THAT COLOR. i have the new issue of that kit. got it on the back burner until i think im up to gettin the doors on right LOL .

body work brings up a few ??? from me. i agree about the 1 part products i have not had good luck from any of them. except for the tamiya basic thats worked the best for me just my opinion. NOW FOR THE ?? i have since been using the evercoat metal glaze .it reads premium finishing and glazeing putty but the way i use it is fill as much of the area i can with scrap plastic. use the evercoat to fill and blend the area let it dry or set up sand primer check the area. fix if need be then sand for my color coats. i do use the tamiya for pinhole size areas. should i be using a filler befor i do the above and does evercoat make a filler??? and last LOL has anyone heard of or used a product called icing ??? THANKS ALL rob

HI if i follow you right you will need to add as much sheet plastic as you can. when i do this i use plastic weld and superglue. as far as a putty goes i cant say enough about a 1.1 putty called eurosoft evercoar its a 2 part and has never shrank on me. but as i am new to this kind of work also test all products on some scrap first. hope this helps rob

THANKS rob

i have never used b.m.f before. got some yesterday then saw some pics of some gasers that didnt even have windows LOL .my ? is do i use bmf on drag cars or is it used on mostly stock or custom stuff? THANKS FOR ANY AND ALL TIPS here is the car i am asking about rob

HI ROLLINOLDSKOO yes the fenders are cut out. yes it comes with both fenders. the blue is tamiya the orange is the new testors .rob

THANKS for the info. how would i get in touch with him ?? thanks rob

can anyone tell me what to use to thin this?? THANKS rob

HAVE A SAFE DAY