bummer666

Thank you all for the suggestions and help really appreciate you all and I love this forum!!

Hello again forum, here for any help I recently purchased a Entex 1/16 1914 Dennis Motor Fire- Engine and all bags were all pretty much stapled but there are 2 things I'm missing and need to know if anyone here would know where I could get replacement? or aftermarket? I'm missing one of the clutch springs, and one of the brass eyelets for axle. I took some photos of spring I do have with a mm measuring ruler not sure if I'm figuring the measurements correctly or where I can even find this small of a spring. this is the measurements I figured going by the info I got off the net to figure out the spring size: Solid Height 2mm, Free Length 5.5mm, Outside Diameter 2mm, Inside Diameter 1.75mm or 2/32" or 1/16", Wire Diameter 1/64", Max Rod Diameter 2mm. I couldn't take photos of all measurements. I hope all the experts know the actual size and maybe where I can find and or how to purchase using the correct sizes? I'm also missing one of the brass ladder eyelets for axle. I don't know where to even start looking for one of these nor how to measure to get the correct one, any help would greatly be appreciated as always! Thank you in advance for any help! Bummer666

Hello Forum, I just recently purchased a Revell The Visible V-8 Engine its pretty old the box has no pictures on it its just a white box with the name Revell V-8. My question forum or should i say info if out there the kit seems to be almost complete but as i went through it it's missing two of the 3V light bulbs & a few of the round head screws short and long. Does anyone know where i can get light bulbs? or something that would work? The size and thread type for the screws? I'm also posting photos of kit so you can see what i'm talking about. Thank You in Advance as always for any help or info Forum! Bummer666

thank you for the info much appreciated!

where would i find that? and thank you

Hello Forum, I need some tips or help with a Aushima 1/12 '81 Kawasaki KZ100C CHP police motorcycle i'm going to start building for my best friend who is a retired CHP motorcycle Sargent going to suprise him with this model and i want it to look as authentic as posable i'm hoping maybe a member here has built one of these before? my main question is what color white should i use for the cowl, and all parts that are white? i can see just by looking at some real CHP images i got off the internet its not a pure white paint i hope someone might have the answer, thank you in advance as always! bummer666

yh70, thank you

Hello Forum, I have a question I hope all you veteran old school model experts can answer for me please? Was the original Revell 1971 not 1972 not 1976 but 1971 Evil Iron only molded in red except the chrome parts? There are no black molded parts they are red, matter of fact on the box it says model molded in blood red so is this true? Thank You Forum in Advance Bummer666

hello forum i know this is a older topic but i just purchased this model built and i'm disassembling it and most of it was already disassembled could anyone who has instructions please upload or scan and copy? thank you in advance! Bummer666

Hello all, I'm in need of 1971 REVELL H-1229-380 Evil Iron Knight Rider Chopper Trike 1/8 Model Kit instructions I purchased a not completed one of these and instructions are missing! hoping one of the members here can please scan and post please? or point me in right direction on where to get instructions. thank you in advance!

hello fellow members, i have a question and i think this is the right place for it. Q. is 1/12 scale the same as 1:12 scale? and what is 1/12 scale or 1:12 scale in inches? thank you in advance to all who answer. Bummer666

hello, forum i have a question not sure if its been asked before but, every time i try to glue in the tiny rear-view mirror on any model car or truck i always either get glue on or all over the windshield or cant get it to stick at all. and either i get very frustrated and end up just getting rid of it! im using Testors clear parts cement. am i missing something? is their any tips or tricks anyone can help or give some advice? thank you to all that respond in advance! Bummer666

heres the motor so far and headers I went with first pic that you see colors for motor oil pan and tranny, and the for top end of motor im going to go with second pic colors! and im putting pix of tires too!

here's bottom pan, roll cage fire wall/dash not assembled yet

here are some pix I like to start with body then get in to the rest the #15 is what color scheme

hello mcmf NASCAR fans, I'm building the Revell/monogram legends series #15 Earnhardt ford wrangler thunderbird and I'm trying to go full detail and paint schemes I need any reference any fan or forum member can help with I mainly need engine, engine compartment, and interior dash. photos, statements, anything will help and I will post pix as I go along! thank you all who look at my post and thank you all in advance for your help pix and input! bummer666

thanx gman I will give it some thought

sorry JollySipper for taking so long to respond to you but here are the instructions you asked for

hello forum, first time posting here i am building a AMT 65 ford galaxie 500 xl for a friend he would like me to keep model all stock but wants to know if i could build model lowered I need help, tips, or info on how i can do this without loosing the integrity of the model, all help will be appreciated! thank you all in advance!

one last thing how did you figure out the top notch's on firewall for hood??

hey Clutch, tanks for the heads up on the firewall unfortunately I found out the hard way I had it painted and all together until I tried to put shell on!! " @#$$@@$$!! " so I cut out battery box and used the end piece of battery box and glued it were battery box was, and shaved down each side of firewall like you said .075 (3/16") and it fits im post some pix of progress so far but thanks again bummer666

im looking or hoping to find a resin model of a 1958/59 Chevrolet apache fleetside pick up with wrap a round or big rear window 1:24 scale thank you to all that responds back