Bigtrain

Upon looking a little closer at the bottle I was indeed using FS 30538, I did not intend to spray flat paint. I mixed the paint according to Donn Yost's video on painting models, 2 parts paint to 1 part lacquer thinner. I was using a .04 mm needle with the air pressure set at 30 psi. I do know not to pay a lot more attention to Testors paint codes on the bottle!

In the last message I meant to say "roof"

As an addendum, I was beginning the striping process and I noticed that the paint I had sprayed on the underside of the room rubbed off just like powder.

I did, 1 coat and after it dried I did a light sanding with 600 grit

I did, 1 coat and after it dried I did a light sanding with 600 grit

Good afternoon guys I need you're opinions and suggestions please! This Monza was painted with Model Master Insignia Yellow enamel thinned 2 parts paint to 1 part lacquer thinner. Harder & Steenbeck evolution with air pressure set to 20 psi. HELP!!!!!