
semijoe
Members-
Posts
538 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Everything posted by semijoe
-
for power, i am using 2x chevy 350 motor, also received in 2 rc4wd radiators, still waiting on mufflers and fuel tanks . on this part of the build is where i made a small change and i am going with twin engine rather then a single engine . i think this would make the engine compartment so much nicer to look at
-
transmission time, i want to use a 3 speed, so i went with an tamiya tractor transmission, if you the know transmission you will know that it is for a rear truck only, but my truck is an 8x8 . i could of used the tamiya f350 but it is very tall and bulky looking. so what i did was i took the lower shaft out, drill out the tip, tapped a 4mm hole. i used a spindle and screwed that in and cut off what i didnt need. les make and alum housing so i went with this too,
-
today i received in my tires and wheels from rc4wd. they are a 1.7 size and is a correct size for this scale build, the tires are a hard compound and be able to support the weight. i also started on rear suspension. still along way to go on the chassis , it very hard to find pictures of this chassis, haven't seen one picture yet . any body find any please post them .
-
hey guys, its been awhile heres a build that i have wanting to build for a long time, winter is here so time to get started , here is a picture of the real truck i started with alum rails, started drilling all the holes there is dip in the front section, so i cut it out and attached to the bottom next i needed to prefitted the cross members and suspension, but the chassis has to be widen up, here i add the axle, now i see where i can widen the chassis here i widened the chassis , and added a few suspension parts, now it all has to come back apart and i have to make cross members, add some skin to the frame rails here i made sure all holes are drilled and i stared to add some styrene skin
-
king hauler low pro tow wrecker 1/14
semijoe replied to semijoe's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
all finished -
king hauler low pro tow wrecker 1/14
semijoe replied to semijoe's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
making the parts is on this section, painting started -
king hauler low pro tow wrecker 1/14
semijoe replied to semijoe's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
today i made an adjustable t-bar. reminder that everything works, everything comes apart, slides, moves, does what has too -
king hauler low pro tow wrecker 1/14
semijoe replied to semijoe's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
thank you -
king hauler low pro tow wrecker 1/14
semijoe replied to semijoe's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
ive started on the next arm -
king hauler low pro tow wrecker 1/14
semijoe replied to semijoe's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
today i made the 2nd and 3rd extension arms, i want show you how far it extends and how the whole unit drops and locks [/URL -
king hauler low pro tow wrecker 1/14
semijoe replied to semijoe's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
primed and painted the tool boxes made the 1st and second knuckle, made the out riggers, added rear lights , bumper and more plumbing . still along way to go -
king hauler low pro tow wrecker 1/14
semijoe replied to semijoe's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
so I had to cut , drill and paint a new set of rails , i needed to make the rear holes 1/4 shorter. added container fenders made some tool boxes add a winch made a valve body and added the plumming -
king hauler low pro tow wrecker 1/14
semijoe replied to semijoe's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
next I removed rear bumper mounts, but ive added a smaill cross member I finished the main boom and mounted it. -
hey guys, long time sense ive been on here. I just finish moving and setting up my new shop . so I ready to go again. this build is built from different Tamiya kits, but the wrecker boom is all scratch I started with custom 25 king hauler rails with the rear for a scania added all alum cross members, next ive installed lesu air bag kit , lesu carrier bearing and 2 lesu metal drive shafts. im using lesu rear metal axles . lesu front shocks . 2 futaba servos, lesu metal fifth wheel and plate, rc4wd force wheels , front tires are rc4wd super singles , rear tires are lesu all terrain (very aggressive tread). so I cault you up to date