semijoe

I put the inner panels on the hatches and made some handles next I put some angles under the windows I made some rear antenna mount

these trucks are pretty kool , but huge . thanks man started on the hatches,

I have a couple of ideas in mind, but not sure yet, thanks man

roof is on and sanded

man! this is so frickin kool

started on the roof cut the holes, drilled 96 holes and started with the micro screws screws are in, roof Is glued , tomorrow I will sand and start on the hatches

these are the parts that I cut and put together for the platform . this is the right side that made today here it is finished and painted next I started on the roof top. there is 6 hatches to be cut and made .

theres a couple of platforms that sit on top the rear fenders , I made one so far

right fenders are on for comparing to a 1/16 scale truck

some small updates

I kept the drive shafts black, linkage black and painted the brake drums flat black . still need to paint the air containers little by little she's coming back together , I cant paint the roof yet, as there is a lot of parts that I still need to make

sounds . lights and a working hydraulic arm BLAH_BLAH_BLAH_BLAH, there goes a quick 3 cans of paint

GOOD NEWS and BAD NEWS , bad news is I have to take apart. good news is , the lower hull will be painted a day of disassembling, sanding and painting . im thinking 3 days

today I made the air cleaner, wind shield wiper mounts and started on the right side hood here I finished the right side

some beautiful builds there man, nice work . welcome to the forum

I made the lid/door to the rear storage box

today I worked on the side of the hood, theres a lot of parts to make here . tomorrow I will do the other side

I made the grill and made the hinges hey its a working door

I had to reinforce the sides with plastic square stock and with metal inserts next I installed the speaker reattached the hood and sides

thanks guys interior is back in the mfu unit has a control panel. the truck has some kind of storage box in the back bay, so I will make the storage box and put the control panel in it , I still need to make an opening door for it

today was day from hell. I hate electronics, love to build though. any way, I have everything to install, light, sounds, esc , battery(grade later to 5000mah) speaker rear lights are in, will make bucket later have to make a lot of change in rear of the cab, I was able to keep the sides, but the floor I have to raise 6mm the mfu needs airflow, I remade the fllor and cut out a vent

today I started on the wind shield , looking at the real truck it has an 5 inch thick window for protection. so I cut , glued, drilled , made and installed it I had some time left so, I made the net 2 pieces that go to the sides of the hood

today I started on the top part of the hood and wind shield . I drilled 44 holes and installed 40 microscrews and made 4 lifting eyes the top grate/grill came out nice too

other side windows are cut and micro screws are in wind shield is in, and gluded, ive prfitted a side hood piece, get to see what this looks like with a hood . the side hood piece is about 10mm to tall though. all interior panels are in , roll bar is finished

today I worked on the dash board area. there a lot to do here. I started off making the lower center piece, it looks like heating and air condition made the front seat mounts and prefitted the seats the upper dash board I used a donar from truck, not sure what from though . the 1/10 scale steering wheel was to big, I needed a 40mm one and the king hauler fit perfect, I still have a lot to do tomorrow in this area . nothing is glued here