semijoe

had a chance to work on this alittle today ive added a crossmember in front of the transmission, added 55 turn motor and start with the slats on the side of the rails

transmission is in place and front drive is installed , working my way back , the transmission is a rc4wd r2 single speed with a 55 turn motor, I cut new frame rails at the correct length this time at 29.5 inches

wow, this really kool build , nice job on it

stabilizers and front hangers are done

so far everything is located at the right height and right place , I do have to make some new frame rails as these are alittle short . but in the mean time I will work with these to see rear everything else goes . running from the front leaf to th axle is a stabilizer , I have to make these and the mounts

finally able to get started on this build, ive been wanting to do this for along time. I believe ive done enough research and download enough pictures to get start like all my builds it wil be r/c with a working arm . ive scale this out to be a 1/10 which is really big, somt times I think I take in to much fumes . lol ive measured this out to be around 790mm, tires are 126mm using 2.2 rims theres going to be a lot of 3 steps forward and many steps back . im going in 1/2 blind on this and don't know what walls I will be hitting. im assuming around 400 hours , so this will be great winter coming build . well enjoy the movie and lets get started ive cut the frame rail, I some what know where the axles go, I need to make the lower hull 1st. ive started by intergrading the rails in the hull, starting from the front

heres link to the build http://www.scale4x4rc.org/forums/showthread.php?t=72665&highlight=502 this had a all metal engine and transmission in it , single speed . heres the build http://www.scale4x4rc.org/forums/showthread.php?t=72665&highlight=502

im in this month readers rides page 26, the Toyota bruiser 502 full pull . I just found out today , wahoo!

a customer stopped by the other day and notice my crane for sell, so he bought it, but hes wants it finished , i installed 2x futaba servos, 3 transmission, he want stock motor 27 turn, bearinged, cab is a king hauler day cab and will hav a flatbed

wahoo all done guys!

almost dont with the crane

i made the arm today

today i worked on the knuckle and added the top hydralic lines

out riggers are done , lines are ran , tomorrow i will get back on the boom, there is still the knuckle boom to build and the extension boom to build, long way to go

extend the back and mounted it , not sure on the bumper yet next is the out riggers

im glad I had these shocks laying around. it makes it look real, thanks man

main boom is built, painted, and done . next is the swing arm

while the main boom is drying , i modded a shock where it is 190mm long, also added some hyrdalic lines and a valve box

main boom is almost done , i need to make hydralic mounts for it

main shaft is built and painted , tomorrow i will start on the boom

i took an old shock that looks like a hyrdralic tube, the tube was the right size but not the out shaft. the shaft was 3mm but i needed 6mm. ive als add to hydralic lines . the main is also made and ready for primer and paint heres a sneak peak on the truck

so the base is done and painted , but i need to find some decals

thanks everybody for watching people are asking what im putting the crane on , i really wasnt going to make the truck, but what hell, might as well. the truck wont be scratch but will be alot of modding so while the bottom half is drying from painting it, i will get started on the truck im going to do an 8x4, twin steer k/w, 26 inches , agressive tires in the back, chrome 2 holes bud rims, not sure on motor and transmission yet.

ive built the main compartment and prefitting the pivot shaft heres the back view

wow thats turning out really kool,