semijoe

you would never it was a model, out standing detail

felt like working with plastic today, so i started on the topper for the boom compartment again, every truck i look at is alittle different. so im going to combine what i saw from each one. 1st theres the main topper, then i made a removable top plate on top that. the plate has 32 micro screws in it so the basics is done for it. i figure i show you a before shot , tomorrow i will sand, prime and paint

small update i received in nother batch of micro screws and wow was a difference it makes i started with the sides of the topper and the floor also added some to the top of the engine compartment

pull rods are on spacers are in electronics are up and running, still along way to go though

wahoo! the actuator cam in and have to say ,its perfect for what im looking for i made the main joint cup, the 1st lower boom is 278mm long, then the knuckle and then the main boom , which is 580mm long i mounted the actuator too. i still have quite few parts to make still. but i figure i show some pictures

hey pete , thats is a really sweet car. i beleive i can get these cars for arround half that price. but i have to get them 2x a time

thank guys! today i some time to work on her i built the main support for the book. it will mount directly to the frame. this should be stridy enought for what im doing with it. i couldnt make it a solid peice, as everything has to be able to come apart .

was looking a bunch of different pictures sent to me by alot of people, 1st of all thank you! 2nd , i would have to say that almost every single truck was different in some or another i work the tank topper today. hopefully this is close

ok thnx for all the guys that sent me some pictures they really help out i did some more on the topper, next is the snozzle

usually when i pick a build out, i like to build someting that you really dont see alot of. i build alot of rigs for customer and after awhile it gets very boring.this is why i dont own a big rig my next build is to finish the hemtt. but after that was thinking a scud launcher. it scaled out to 48inches long 12 inches wide. ive built a rocket launcher once , it really worked to. but the detail in this one would really kool thanks

have to say was really nice to have time off today and spend that time on up dating my truck ive painted the wheels and built the top box its in primer, the rails post holes are made

the bottom is pretty much done. so ive added some decals

its been awhile, but here we go again. i ready and i have the itches for it lol most of the light are working, still have a few more to hook up. heres picture of the front and back. light ,sounds and its ready im charging the camera up so we can get some video of it. ive also start on the tank box topper

that cb looking box. is the sound/light/volume control panel. everything barely fit a mini c/b radio would be kool though

i really didnt think of other then water, but a mixed drink sounds good. thnx man for the comments

shes arround 26 pounds with out water

another work of art , abrewing. i really would like to this buid in person

alright , greg finished the installation of the sound and light kit i fixed the probelm with the tires wanting to buckle. there perfect now i changed the steering knuckles to alum and i put alum stiffner on the 2nd axle from what i can tell chassis is all good , wahoo! the tank box is done and painted, water tank is in stalled with electronics and pumer is working. the truck and electronics run on a 11.1 lipo . had to order a new charger. as soon as i get it . i can make a video of it. next is to finish up some detail. then i can get started on the snozzle

work of art on that trans, watching this build pushes me harder and i thank you for that

man good eye

made a few more parts the water hose will work

its like a weed, it just keeps growing

i start on the fenders and mounts , the basic fender is alum but the out skin is styrene diamond plate man the rear of this look awesome

looking realy good, detail is awesome. keep the pictures coming

theres a couple of different ways i can do this. not sure which i want to go yet. this is why i havent done anything in the last few days. its coming to a point where i need to figure out what electronics and where to put them. as of right now the electronic will take all the tanks empty space