semijoe

hey guys needing some help here. i see that theres alot of guys useing cnc milling machines on here. was wanting to know if one of you guys would make these rails for me, these are for a future project that ive been wanting to do for a long time, the only thing stopping me is the frame rails. if it was going to be a static model i would make out of styrene i can make and build evrything else but the rails. i have the 1/24 scale rails here but i want to make a 1/12 scale truck. the project is the 350 payhauler . i want to get the rail made from alum. the truck will be an r/c version, highly detailed. so it will be big and heavy i know it will cost me, but i really would like to get this project built. needing help thnx

woe ! there was alot of sanding, throw some primer on it so i can see it better the a couple of different ways i can continue on the tank. basically you can do any mods to it you want. i think going with the fenders, hoses and a pump box

hey thnx man

worked on the tank today i started to make top side lights, brackets and bucket are on and the tubing is where i will run the wiring

the mixer came back to me from a customer, he sold out of the r/c world. i was wanting to rebuild,but it was so far gone that i couldnt do anything for it

great work on the bike man, i agree on the 1:1 look

the basic tank is built, hoping to have some primer on by the weekend if any body has a picture of the rear end and top , please post the picture

the tank has a weird shape to it. so what i did was buy some 4 inch pvc piping,cut in half and added 90mm to the center part 450mm long x 210mm wide and 112mm high i figure i show you what i have to do to build this part

trans cover is in the oil reserves done. i move it to the front of the fender due to the engine exhaust, dont need an explosion also made a tool box

these picyures i found are pretty detailed. with the engine of to move the tank forward though

on the driver side top fender, is something that looks like a oil reserve, not sure any way, i made the base for it that mounts to the fender and seperately the tank

looking really really good.

made the tire rack out of alum.

there a metal cross brace under the fenders

on the passenger side is a spare tire and mini boom i made one from styrene, everything on it works. both pullies, crank and the boom turns outward i need find some kind of string for it with a hook. next is a stand for the tire

this and the arff truck are mine. i dont think i can ever get back ,what i put into it

i started on the roll cage for the engine compartment. i went aliitle way on this part also made a small utility box next to the fuel tank.

wow wow wow, thats is sweeeeeeeeeeeet! excellent built

i paint the steering box and the rear sub frame also made 4 pull rings , there is one located in between each wheel on the chassis

they had turbo v-8s in them.

the cab i cant wait to get going on it again. the tank, im picking up the material this weekend for it.. i dont really want to make it look like the army one. i have a couple of ideas, but not 100% sure yet.

i was looking at some pictures of the driver side and noticed a steering box. my steering is on the other side so for more detail, i made one today. the mount is alum and the steering box is round styrene without any measurements in front of me, i guessed the size. but i think i have it right

had a early day from work so i jumped right on this ive install the esc / speed controller for the motor also made an air cleaning and filter for the carb plumbing is installed and painted

radiator is painted, next is the plumbing

today i made a carrier bar. im assuming that what it is also paint the floor/fenders