Ira

Thanks Lee! By the way, ALL of my CarToon Rocket Engines NEED Lots of Intakes and Vents!!!... It's like Star Wars Stuff, if it looks Cool...it's Cool!

FERRARI ROCKET ENGINE!!! I started with the Ferrari Engine and began adding Rocket Parts. I added strips of plastic on the BiG Rocket Engines so I could Stack other Rocket Parts on top! I used the Metalic Red Paint to blend the 2 Engines together... Here is the Engine with Reversed Ferrari Parts and more CarToon Rocket Parts in place. I used The Detailer, on most of the silver Rocket Parts...

Thanks Ray!

Thanks Dan!

Thanks Brian!

AMAZING WORK JOHN!!! This is Beautiful...

FERRARI ROCKET HYBRID!!! I have been playing with Car Engine and Rocket Parts to see what kind of an Engine I could come up with. I found that there are endless combinations of CarToon Hybrid Engines. Here is one... I ended up using parts from a Ferrari Testarossa and an X-Wing Fighter. Here is one of the first Mock-Ups of the final design! Remember this is CarToon Rocket Science, so anything is possible...

Thanks Jasen!

Thanks Bryan! I working on a Helmet for the Driver Now...

Nice Work Dave!

GREAT START!!! White & Red, my favorite colors for a T-Bird Convertable...

Thank Brizio!

BiG SCOOPS!!! I needed some Intakes for the Rocket Engines. I found an old Custom Corvette Hood with the Perfect Scoops in the parts box! I cut them out and fit them to the sides of the Rocket Van! Here they are after some putty and sanding...

LITTLE WELLS... I made a Template from the front Wheel Well and traced the shape on the rear. Then I did a rough cut with a cutting wheel... I trimmed the Wheel Wells out pretty good with an X-acto Knife. Next I wrapped some Sandpaper around a bottle and Sanded the Wells Nice & Smooth!

Thanks Jon!

Thank You Dr.!

CHASSIS MOCK-UP... The Chassis got a little crooked with all of that cutting & glueing. I added a small brace between the rear wheel wells that keeps things pretty straight... Here are a couple of photos of the position of the chassis in the body.

NICE SLICING!!!

MAKE IT SMALL... I cut off the front of the Rear Wheel Well to fit the Small Tires. Then I glued a piece of sheet plastic on the end to close it up. I cut what was left of the chassis beteeen the wheel wells and filled in with sheet plastic. Then I glued a strip of sheet plastic accross the rear wheel wells to close it off...

PULLIN' IN THE WHEELS!!! I cut off the Front Wheel Wells and removed about 1/8" from each side. Then I glued the Wheels Wells back in place. This will give me enough room to fit the Front Wheels inside the body. I also cut off the Rear Wheel Wells and removed an 1/8" slice from each side. I also raised the engine so it wont drag on the ground with the New Small Rear Tires. Here is the Chassis glued back together...

Thanks Ed, that's a Great Name!

Thanks Pat! I just picked up another DW Van for a New Project...

NICE SLICING DAVID!!!

One of my favorite kits!!! This should be Great...

Thanks Bryan! I'm Working on it...