Drake69 Posted April 6, 2015 Posted April 6, 2015 Finally got a new photo printer, new photo decal paper, and proper ink cartridges. Trying this one out now, a topic I've wanted to do ever since the first movie came out....
Drake69 Posted April 8, 2015 Author Posted April 8, 2015 Next update... mostly together... Firestik II fiberglass antenna (need to source a suitable CB radio!) Seat belts and seat belt retainers alongside center console Warn 9.5ti thermometric winch with cloth weave cable spool...
Drake69 Posted April 8, 2015 Author Posted April 8, 2015 (edited) Thanks! Next update... decal striping put down... And into final assembly... CB radio installed... After drying, then the final decals will go on. NOTE TO THOSE WHO HAVE YET TO BUILD THIS MODEL: 1: If you intend to use the stripe decals, lay them down prior to attaching the snorkel and door handles. You will need to punch holes in the appropriate areas to finish assembly, but it makes the process MUCH easier than trying to affix those stripes with everything put together. 2: The door pieces are wide in height, the slots for them are NOT. Shave the door latches with a knife before trying to jam it into the recessed hole for them. 3: There is a pin on the back of the door latch that is supposed to go into a hole in the door. CUT IT OFF to save yourself a ton of aggravation. 4: There are two holes in the hood to attach the hood latches on. Widen those holes slightly with a pin vise before trying to push them in. Consider clipping off the pins in the back of the latch and just glueing those on as well. Edited April 8, 2015 by Drake69
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now