Need tips for eliminating decal edges on tires.

[wisco8]

If anyone has a cool tip on how to get the edges of these decals to lay down better, or if there is a way to clear coat over them it would be appreciated.

                                                                               Thank you, Steve.

[Dragline]

I use some decal set followed by Tamiya clear or Future with a little flat base to tone down the gloss.

[935k3]

If all else fails I sometimes use a 10/0 paintbrush and paint over the edges with Tamiya acrylic flat or semigloss black depending on the sheen you want.

Edited March 14, 2017 by 935k3

[Mr mopar]

I use Tamiya Clear first ,just paint the tire where the decal will goes let semi dry then place decal on tire , your done No silvering or edge of decal showing.

[Silver Foxx]

I settle them down with some setting solution and when dry I spray them with a coat of Testors Dullcote , takes the shine off the tire as well . Hope this may help .

[Exotics_Builder]

I settle them down with some setting solution and when dry I spray them with a coat of Testors Dullcote , takes the shine off the tire as well . Hope this may help .

I use the same technique and it works reasonably well