gator52 Posted January 6, 2018 Posted January 6, 2018 About to start mine; is there anything that would be helpful to know as far as fit, assembly sequence, etc? Thanks Jonah
modelercarl Posted January 7, 2018 Posted January 7, 2018 I have built a couple of these and the only problem I encountered was the side window glass. It is too tall and will not let the interior bucket and frame install at the proper position. My solution was to hold the glass in position at the top of the windows and use a scriber to scratch a cut line in the glass using the bottom edge of the openings as a guide. Then using an exacto saw blade, cut off the excess stock along the bottom edge (if I remember correctly it was just under 1/8"), and file the cut edge to clean it up and finish assembly per the instructions. It really goes together very well and makes a good looking display model......fits are very good on everything else.
Casey Posted January 8, 2018 Posted January 8, 2018 On 1/6/2018 at 2:50 PM, gator52 said: About to start mine; is there anything that would be helpful to know as far as fit, assembly sequence, etc? Did you read through the Review topics already?
gator52 Posted January 9, 2018 Author Posted January 9, 2018 No, I missed those when I searched. Thanks! Jonah
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now