1:24th scale measurments

[evilone]

i need to find the 1:24th dimentions for something that is 1ft tall 23/4in wide and 11in deep

and i need them asap

[my80malibu]

I think it would be 1/2 tall 1inch wide 7/16 deep. this is based on 1/2 inch =1 foot

hope that helps

Gabriel

[Guest Gramps-xrds]

If you divide 1 by 24 it'll give you the measurement of .5 = 1 ft and if you divide .5 by 12 it'll give you .0416 = 1 in. W/ this you can scale anything in 1/24th scale.

[Harry P.]

All you have to do is divide the full-scale measurements by 24.

1 foot 2.75 inches = 14.75 inches (the full size measurement).

14.75 divided by 24 = .614 inches, or a little over 1/2 inch.

11 inches (full size measurement) divided by 24 = .45 inches, or a little less than 1/2 inch.

So the scale size would be .614 inch tall and .45 inch deep.

Or to round it off into "regular" numbers, about 9/16 tall and 7/16 deep.

[Frank]

Download and give this a try http://www.quickscale.net/

[billd64]

thanks for th elink, gonna try it, hopefully it will help when ordering things for armour pieces.

bill

Download and give this a try http://www.quickscale.net/

[bobss396]

Go metric! I use the 1mm = 1 scale inch and it works (close is good enough for atomic wars) in 1/24 and 1/25 scale.

Bob