Jump to content
Model Cars Magazine Forum

Recommended Posts

Posted (edited)

This build has been sitting on the bench for awhile. So while waiting  for  items I ordered to complete another build  I thought I would get some work done on this. The kit started off as an SSB resin  2005 E450.  It was the best I could find  for the build. I need it to be closer to a 2022 cab which is why the project stalled  while I tried to figure out a more modern grill. Then the resin box I was going to modify, just wasn’t cutting it, so I decided to build from scratch.

Dom

72565697630__38FC08E0-B028-4D8D-A547-77C8FA2C421B.jpeg

72565695902__C1F24D86-0680-48BA-B3BA-F7B91D9E5038.jpeg

IMG_5773.jpeg

IMG_5772.jpeg

IMG_5776.jpeg

IMG_5792.jpeg

IMG_5790.jpeg

Edited by Firebuilder
  • Like 2
Posted (edited)

I found a Ford F150 friction toy for $5.00 and the grille and headlight assemblies were much closer  to what I need. So I cut it apart and modified the resin cab headlight openings. I also cut apart the rest of the toy and will put the fender flares , mirrors and wheel tubs to use on other projects.  The scale for the toy says it is 1:28, but it matches the resin casting which is 1:24 perfectly.    The rear bumper was also finished. Work goes on…….

IMG_5796.jpeg

IMG_5799.jpeg

IMG_5800.jpeg

IMG_5801.jpeg

 

 

IMG_5797.jpeg

 

IMG_5812.jpeg

 

Edited by Firebuilder
  • Like 1
Posted (edited)
On 1/31/2024 at 2:07 PM, Firebuilder said:

This build has been sitting on the bench for awhile. So while waiting  for  items I ordered to complete another build  I thought I would get some work done on this. The kit started off as an SSB resin  2005 E450.  It was the best I could find  for the build. I need it to be closer to a 2022 cab which is why the project stalled  while I tried to figure out a more modern grill. Then the resin box I was going to modify, just wasn’t cutting it, so I decided to build from scratch.

Dom

72565697630__38FC08E0-B028-4D8D-A547-77C8FA2C421B.jpeg

72565695902__C1F24D86-0680-48BA-B3BA-F7B91D9E5038.jpeg

IMG_5773.jpeg

IMG_5772.jpeg

IMG_5776.jpeg

IMG_5792.jpeg

IMG_5790.jpeg

Roxbury had Hortons at one time,I don't know if they still do or not,,looks good !  The tapered roof would be a Braun I believe

Edited by Scott Eriksen
Posted
11 hours ago, Scott Eriksen said:

Roxbury had Hortons at one time,I don't know if they still do or not,,looks good !  The tapered roof would be a Braun I believe

Scott,

You are correct sir, the rigs they are using are now Braun.  Co. 1 is running a 2022 model ambulance .   The  colors have changed from  yellow with a blue stripe (fire apparatus still yellow) to white with a  blue and yellow stripe. I am trying to get this build as close as possible, but it won’t be 100%.  With that, I put bondo on the hood to bump up the middle, matching a 2022 Ford E450. The grill is close  but not accurate. I am working from photos of the actual rig. Still need to  fine tune  and finish sand, then prime again.

Dom

IMG_5819.jpeg

IMG_5820.jpeg

IMG_5821.jpeg

IMG_5823.jpeg

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...