Parts for my 935 project

[Pete J.]

Here is a radiator that I made for my Tamiya 935 project. These are the PE parts from the SMS kit. They were originally intended to be glued over the plastic radiator(the white plastic piece in the photo. I decided that I wanted to test my soldering skills and have a "see thought" part, so I soldered some 1/32" brass angle to the backs and then soldered the piece together. The radiator is not a perfect rectangle. In fact far from it. The sides are very much curved and the rear is larger than the front so getting the pieced to together is a bit of a challenge.

[Pete J.]

Another piece completed. This is the turbo boost controller and the gear shifter. 21 pieces, mostly held together with solder.